Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: macrium recovery cd won't boot

13 Oct 2012   #1
rnhende

windows 7 home premium 64 bit
 
 
macrium recovery cd won't boot

just installed free macrium w7 64 bit backup. created image bu on external hd. created both pe and linux recovery cds. inserted cd, shut down system; turned on system, no boot from either cd; windows came up normally.

what could be my problem?


My System SpecsSystem Spec
.
13 Oct 2012   #2
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Tell your bios to boot from cdromdrive first.

You probably have an option if you watch the screen carefully as your machine starts up - something like press FKEY WHATEVER for boot menu, or boot options, or similar.
My System SpecsSystem Spec
13 Oct 2012   #3
rnhende

windows 7 home premium 64 bit
 
 
fixed macrium recovery disk boot problem

Took me a call to hp to figure out that the f9 key would allow me to change boot device. tried unix cd, didn't work, wouldn't recognize my external hard drive. tried pe cd and it worked
My System SpecsSystem Spec
.

14 Oct 2012   #4
kado897

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

Hi rnhende and welcome to Seven Forums.

With HP machines you can press Esc early in the boot sequence to get to the start menu. The F9 boot menu is an option from there.

It's not uncommon for the Linux disk to fail. The PE disk is much better.
My System SpecsSystem Spec
Reply

 macrium recovery cd won't boot




Thread Tools




Similar help and support threads
Thread Forum
Macrium Reflect Recovery Boot Menu entries
A Q or more for anyone familiar with MR. I'm dual-booting W7 & 10 (both Pro x64) on separate SSDs. Reflect Free v6.1 (same build) is installed on each OS (my first experience with Macrium software). If I select W7 as the default OS, I get the legacy boot loader (Windows Boot Manager). If I...
Software
Recovery with Macrium Reflect Free - strange boot disk issue
Hello, I was having issues with my system so decided to restore back to my Macrium gold copy of a clean install. I have two drives in my PC, on SSD for the Win7 OS and one HDD for data/backup. I had a copy of my gold Win7 as a partition on the HDD. When I went through the recovery process, all...
Backup and Restore
Cannot access HP recovery (F11) after using Macrium Reflect
Hi, previously I used Macrium Reflect to do an image of my HP laptop's hard disk, and yesterday, i tried to recover using the image, everything was successful, however, I cannot access the recovery partition anymore. Pressing F11 while booting does not boot into Recovery Manager anymore like it...
Installation & Setup
Macrium Recovery
I am trying to recover a system using the free version of Macrium. Using the recovery disk, there is an option for partition selection, but it only allows you to select one partition. Is there a way to select more than one? or even the whole disk? I am having a problem because the MBR is having...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:52.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App