Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Win 7 cloned drive wont boot

16 Feb 2013   #1

Windows 7 Pro 64 bit
Win 7 cloned drive wont boot

Any suggestions on how to make my cloned drive boot? I installed Win 7 to a SataIII drive/port with the intention of doing a bootable clone to a SataII drive/port. However on completion of the first install I realised that my cloning software was not capable of cloning the SRP (system reserved partition) to my second drive.
Plan B Installed a second copy of Win 7 to the SataII drive/port on a single partition (no SRP) with the intention of cloning over the SataIII drive to eliminate the SRP.
Was hesitant to do this as the clone software wipes the SataIII drive so as a tester I cloned the SataII drive with the single partition to a spare SataII drive and it copied ok. Unfortunately when I disconnected the SataIII and SataII source drive the recently cloned spare SataII drive would not boot. The boot manager prompts the user to accept either of the two installed versions of Win 7 and whichever you nominate the spare SataII drive fails to boot. I installed the Win 7 repair disc to fix the start up but it displayed a message that it was unable to fix it.

My System SpecsSystem Spec
16 Feb 2013   #2

Microsoft Community Contributor Award Recipient


My System SpecsSystem Spec

 Win 7 cloned drive wont boot

Thread Tools

Similar help and support threads
Thread Forum
Cloned Win-7 Drive won't boot - error 0xc0000000E
I cloned a 160 gb drive to a 1 tb drive using Ghost 2003, but the clone won't boot. I get a text-screen telling me "Windows failed to start. A recent hardware or software chance might be the cause. To fix the problem..." Status: 0xc0000000E Info: The boot selection failed because a required device...
Installation & Setup
Cloned SSD and it wont boot internally. Only boots from USB
Hi All, not sure if this is the right forum but im having an issue getting a cloned disk to work on a Dell Laptop. The laptop is a Dell Latitude E7440 and its running Windows 7. I have used a bootable Clonezilla USB drive to copy the internal 64 GB SSD to a usb adapter connected 500GB SSD....
Hardware & Devices
cloned SS drive - at boot up - No Boot Device available ?
I have a Dell Studio XPS 8100 with windows 7pro. All hardware drivers are current and operating properly. I am attempting to switch out my 1TB WD hard drive with a 1TB Samsung 850Pro SS drive. My cloning went smoothly. For my 'initial' attempt at cloning, I used the EZGig cloning software off...
Hardware & Devices
Stop cloned D Drive from being active on boot?
How I keep my systems backed up is to have 2 identical sized drives in the computer, the 2nd one is an exact clone of the C: boot drive. Nightly I sync changed documents, images, etc. from C to D. I might not make a fresh clone for 6 months to a year, there's no need to. If anything goes...
Performance & Maintenance
Cloned HP_Recovery partition wont boot
OK, this time I am going to cut this really explanations as to why i am doing this. I just typed a detailed post, clicked Submit New Thread..and it said i was not logged in and I lost the lots. I want to replace the original HDD with another I Cloned the original HDD; Cloned the 3...
Backup and Restore

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:56.
Twitter Facebook Google+