Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Create System Image of an external hard drive

26 Nov 2013   #1

Windows 7
Create System Image of an external hard drive

The Background:
Yesterday a computer in our office started misbehaving. Over the weekend, several Windows updates were installed. On Monday the user would open windows explorer and within 30 seconds or so he was prompted with a message saying something to the effect of, "windows encountered an error and had to close". All the windows including software such as Outlook and AutoCad would then close. There was no restart or shut down, just everything closing. This happened repeatedly.

I instructed him to find a restore point. He later told me the only restore points available were from Friday and then over the weekend, so he chose the latest one, that being Friday. After the restore was complete, the machine began to run through the normal boot process. However, once the windows symbol fully displayed, it would go to the black screen that normally briefly appears before your desktop appears, but the desktop never appears. The machine beeps and then re-boots. After the re-boot, you get the normal screen that prompts you with two choices, launch a repair or start normally. In either case, you get the same result as I just mentioned.

The Question:
Unfortunately, a system image of the troubled machine was never created. I pulled the hard drive and with a SATA adapter I connected it to a working machine and was able to read the drive with no problems. Can I create a system image of the now "external hard drive"? I would then use that system image (which would be saved on our network) to try an restore the ailing machine.

Any help would be greatly appreciated!!!


My System SpecsSystem Spec
26 Nov 2013   #2

Windows 7 Professional 32-bit/Windows 8 64-bit/Win7 Pro64-bit

My System SpecsSystem Spec
26 Nov 2013   #3

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64 +Linux_VMs +Chromium_VM

I doubt creating a system image now and restoring it will help.
System Images need to be created before problems arise, so the restore uses a "working" image of the OS.
I expect image/restore now will restore the problem...
My System SpecsSystem Spec

10 Dec 2013   #4

Windows 7

Thanks everyone for the advice/suggestions.

The image I created did not work. In the end, I was able to retrieve all of the data from the drive and then reformat it.

I have other questions concerning this whole ordeal, but I will start a new thread on those topics.

Thanks again!
My System SpecsSystem Spec

 Create System Image of an external hard drive

Thread Tools

Similar help and support threads
Thread Forum
Restoring via system image using external hard drive
Despite the great help I received yesterday, I am still in the same boat. I am trying to "clean up" my Dell Inspiron 1012 (Dell Mini). It does not have a CD drive...only USB ports. I have an external hard drive connected to one of the USB ports. The computer has the Windows 7 Professional OS...
Backup and Restore
Create system image won't detect external hard disk
Hi, im having a problem trying to create a system image and store it in my external hdd. This isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all. But now, for some reason it wont detect this hard drive, it...
Backup and Restore
Partial system Image access on external hard drive
Ok massive tale of woe here. I was using my computer last week, when it shut down unexpectedly. I couldn't get it too boot back up properly, and when I tried to access system recovery and startup repair I couldn't use them either. I worked out that I had an unmountable boot volume problem. I fixed...
Backup and Restore
Unable to select external hard drive to save a system image
I've ordered a new hard drive for my laptop to replace the current 160 GB it has. It should arrive very soon so I've just tried to create a system image of my C:/ drive but when choosing where to save the image I am not able to select my external hard drive, instead it blanks it out the on hard...
Backup and Restore
create system image and restore New hard drive
Hi I am running a new latitude e6510 64-bit and I am trying to create system image to a new hard drive I purchased when I bought the new computer for back up. The new drive is WD Blue Scorpio. I loaded win7 pro on the new drive and did create system image. When I tried to restore system image it...
Backup and Restore

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:48.
Twitter Facebook