Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Spanned Volume Recovery

16 Mar 2014   #1
cyberyoda0

Windows 7 x64
 
 
Spanned Volume Recovery

Hi all,

First I'd like to say that I'm an idiot, I just deleted my spanned volume . I'm about to run the MiniTool Partition Wizard Home Edition v8.1.1 (free version), and just wanted to run this by you guys so I don't mess it up even more. Here's the setup I had that I am trying to recover.

Code:
Disk 0 - 1T Spanned volume (F:)
Disk 1 - 64G NTFS System, Boot drive (C:)
Disk 2 - 1T Spanned volume (F:)
Disk 3 - 1T Spanned volume (F:)
Disk 4 - 1T Spanned volume (F:)
... a few others that don't matter
Disk 9 - 2.5 T iSCSI Spanned volume (F:)
So, I was trying to pull the iSCSI Disk 9 off the other spanned volumes on F:. I did a Delete Volume, and they all disappeared. Was I supposed to use Shrink Volume? Anyway, there were a lot of threads about recovering partitions, but none of them I saw had spanned volumes. Is recovering a spanned volume the same as recovering a single partition, multiple times? Or is there something I'm missing?

I am in the MiniTool Partition Wizard, and I see all of the disks that I want to recover. However, it doesn't allow me to select multiple disks. So the only option that I have with this tool is to go through the recovery process on each disk individually. Is this the right method? If so, how do I get the full spanned volume back after each disk is recovered?



Thanks in advance!
-cyberyoda


My System SpecsSystem Spec
.
16 Mar 2014   #2
cyberyoda0

Windows 7 x64
 
 

Just a quick update. I've been scanning the disks for partition data using the MiniTool, and it's come back with some strange results. Disk 0 shows an abnormally large partition. And after a long while of scanning, I haven't found any partitions on the other disks yet.

Even though the first disk is 931.51GB, after finding the partition, the MiniTool is displaying it as a capacity of 6167.3GB (the sum of the entire spanned volume). Does this mean disk 0 holds the partition data for all 5 disks, and recovery of this will undelete the partition on all disks?

Thanks again!

My System SpecsSystem Spec
Reply

 Spanned Volume Recovery




Thread Tools




Similar help and support threads
Thread Forum
Volume label (unknown) in System Recovery Options
Hoping somebody can help me with this one... I dropped my laptop while it was starting up. Needless to say, it didn't like it. On restarting, it didn't boot properly, but went to "repairing startup errors", and hung at that point. I dug out the retail W7 disk I used for installation (Pro...
General Discussion
Accidently deleted/recreated HDD Volume, did NOT format, need recovery
Ok I am going to create a new thread on this, as I had been posting on one dated from 2012 that was an identical issue, but I think starting a new thread would be better. I have a 1TB Western Digital HDD. It is not my OS. It is my data storage drive, with over 850GB of data and...
Backup and Restore
Recovering data from a spanned volume
Help! I had three 2TB drive spanned together into a single volume for all my media files. I had the hose on my liquid cooler break and dump all the coolant on one of the drives. It, obviously, is toast. Now, I would like to get the data of the remaining two. I have run two different...
Hardware & Devices
Can I clone a drive from a spanned volume?
Hi, I have a spanned volume setup with 4 drives. One of the drives is starting to throw read errors which is preventing WHS from backing it up (Yikes!). Is it possible to clone the drive with the errors and to reinsert a new drive into the array? Can the new drive be bigger? Thanks!
Backup and Restore
Partitions, volume and HDD Recovery Files
Hi there, hopefully someone will be able to help. I just got a new Toshiba laptop (Windows 7, 64-bit Home Premium), and the hard disk is split into two sections Windows (C) which has 148GB of space, and Data (D) which has the same. Now, this is far from ideal, as I want to have all the hard...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:52.
Twitter Facebook Google+