Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: After restoring macrium image to new hdd Get boot mgr missing error

04 Sep 2017   #1
provlima

 
 
After restoring macrium image to new hdd Get boot mgr missing error

Have spent better part of two days trying to restore my macrium backup image to a new hdd

I am using Macrium 6 and after much difficulty I finally was able to access the saved macrium image backup file and start the restore process which took several hours.

Upon restarting my PC i got a "bootmgr missing error.

Can anyone help me solve this frustrating problem??

Any help or advice would be greatly appreciated!!


My System SpecsSystem Spec
.
04 Sep 2017   #2
samuria

win 8 32 bit
 
 

Do you have an install DVD to boot from to do a repair. On some clones you have to tick to copy boot sector you may not have copied it hence it won't boot
My System SpecsSystem Spec
05 Sep 2017   #3
mjf

Windows 7x64 Home Premium SP1
 
 

You can image any partition you want.
But if you want just an image to restore your operating system then select " Create an image of the partitions required to backup and restore Windows". The restore using the rescue boot disc should give you a bootable system.

I haven't had this boot problem with Macrium but they do have an option "Fix Windows boot problems". This attempts to fix some of the intermediate boot stages.
My System SpecsSystem Spec
.

Reply

 After restoring macrium image to new hdd Get boot mgr missing error




Thread Tools




Similar help and support threads
Thread Forum
Problem restoring Windows Image to new SSHD - Bootmgr missing
Strap in folks, and thanks in advance for bearing with me, here lies a tale: Came back from Christmas vacation to find one of my WD 500GB HDD was showing "fail." Intel Rapid Storage allowed me to reset the drive, and I made Windows Image files of the system (at the time, two 500GB drives set up...
Backup and Restore
Problem restoring image of an old HD to new SSD using Macrium Reflect
Hello all, Yesterday I bought SSD (Samsung 840 pro 240 GB) and let it be connected to my computer (Win 7). As always advised, I disconnected the cables of the old HD (450 GB) and tried to restore a successful image, which I already used to restore the old HD few weeks ago (made by Macrium...
Backup and Restore
Problem restoring Macrium image, please help!
Hello all, Few months ago, I made an image with Macrium Rescue for my whole C HD. Yesterday I decide to restore that image because the computer starts showing some problems (slow starting on reboot etc…). I used Macrium Rescue CD – V2.1.3775 (Linux 26) which I made during the backup. The CD...
Backup and Restore
Tie In Between Macrium Boot Disk And System Image
I have a Macrium boot disc (CD) and an Image (External HD). Is the Boot disc only for this particular image ? Same question with Windows 7 Repair Disc I made long ago. Is it tied to one particular system image ?
Backup and Restore
Careful restoring from free Macrium w/boot CD and counting on backup
The issue I ran across is apparently the same as in: https://www.sevenforums.com/performance-maintenance/200820-macrium-reflect-free-5-0-4118-need-help-recover-partition-2.html So I had to restore my system to my SSD drive which I just secure erased. I have many drives on my system. I booted...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 03:10.
Twitter Facebook Google+