Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: System Restore in Dual Boot Situations

13 Dec 2017   #1
dlwmacgregor

Windows 7 Pro 64-bit SP1/Windows 10 Dual Boot
 
 
System Restore in Dual Boot Situations

I have seen other discussions on this before but I have not been able to find a definitive answer that parallels my situation.
I dual boot Windows 7 and Windows 10 on 2 separate hard drives.
On each of the OS's I have configured System Restore to be "ON" for the C:. drive and "OFF" for the other drive on which the other OS resides.
I create a new Restore point on my Windows 7 and it works.
I then reboot into Windows 10 and create a Restore Point on its C: drive.
I then reboot and boot into Windows 7, only to find that the Restore point I created previously is gone.
If I then boot into Windows 10, the Restore point I created there is also gone.
Windows 7 is deleting the Windows 10 Restore Point and Windows 10 is deleting the Windows 7 Restore Point.
Now, Windows 7 can "see" the Windows 10 drive and vice-versa.
Is it possible - and I think this likely - that because I have set the "non-active" OS drive in each OS to Off in System Restore, it is becoming confused and deleting the Restore Points?
If that is the case, I can solve it easily in Device Manager by tell each OS to "Disable" the drive on which the other OS resides. This way the "other OS drive" will not even appear in the list of drives in System Restore.
Any thoughts?


My System SpecsSystem Spec
.
13 Dec 2017   #2
Pete4

win7hp64
 
 

I had exactly the same issue, however for past week system restore stays intact even after multiple boots to both systems.No idea why it works properly now, didn't before, haven't change anything. So I rely on back ups just in case. Also, I'm sure you know about it, but just in case for others: Win10 does not shut down your computer when you click shutdown computer. IT HIBERNATES it. Worse yet, it does not update drives directories on restart. So, you work in WIn 10, shutdown (but in reality hibernate) and change into Win 7. You work in Win 7, then go back to Win 10 and your computer has old directories in it's memory and corrupts all the drives that you changed under Win 7. If you dual boot Win 10, make sure you completely disable hibernation, otherwise you will have corrupted drives and no system restore will help you, even if it works.
My System SpecsSystem Spec
13 Dec 2017   #3
fireberd

Windows 10 64 bit
 
 

I used to have dual boot Win 7 and Win 10 on separate drives. I didn't do anything special with System Restore and it worked independently on each OS. System Restore did not affect the other OS.

As far as Win 10 "Hibernate", its not really Hibernate, its called "Fast Startup" and can easily be disabled in the Power options. I have mine disabled as I use SSD's for the OS disc and that is fast anyway.

Here is a screen shot of the panel to disable it.


Attached Thumbnails
System Restore in Dual Boot Situations-fast-startup-panel.jpg  
My System SpecsSystem Spec
.

13 Dec 2017   #4
dlwmacgregor

Windows 7 Pro 64-bit SP1/Windows 10 Dual Boot
 
 

I turned of Hibernate a long time ago but thanks.

Here are a couple of screen grabs to give a better idea of the situation.
Not a big problem, just curious.
I do multiple backups each day in both OS's.

Samsung is my Windows 10 drive.

Windows 10 is the first screen capture.


Attached Thumbnails
System Restore in Dual Boot Situations-windows-10-system-restore.jpg   System Restore in Dual Boot Situations-windows-7-system-restore.jpg  
My System SpecsSystem Spec
13 Dec 2017   #5
dlwmacgregor

Windows 7 Pro 64-bit SP1/Windows 10 Dual Boot
 
 

Strange.
I just cycled thru 2 complete reboot cycles on both OS's and all Restore Points are still there.
I know that certain Windows 10 updates will clear the Restore Points in that OS. Maybe it also clears all the ones it finds on all drives.
I'll keep an eye on it.
Thanks all.
My System SpecsSystem Spec
13 Dec 2017   #6
Pete4

win7hp64
 
 

Maybe MS finally fixed it in one of the updates? In the past mine would erase restore points in 90% of time, (but not always, mind you). For the past week or so all the restores are fine. I have similar setup to yours: Win 7 on SSD, Win 10 on hybrid drive and large data partition. It doesn't make sense to set restore points on data drive and setting restore for secondary partition could actually be dangerous: If I want to restore Win 7 C: drive due to some error for example, I don't want to restore Win 10 drive at the same time, not even sure how would that work, since Win 7 may not be aware of Win 10 registry, but could in theory replace some Win 10 files and royally mess everything up.
My System SpecsSystem Spec
4 Weeks Ago   #7
Pete4

win7hp64
 
 

Well, the restore points are no longer being deleted, but wanted to restore my system and none of the 6 restore points I had, worked. All came up with error about registry files not saved properly or something. How difficult it is to save few files, incompetence of MS sometimes is so ridiculous and you can't even look at those files, because they're hidden, useless idiots.
My System SpecsSystem Spec
Reply

 System Restore in Dual Boot Situations




Thread Tools




Similar help and support threads
Thread Forum
Restore windows 7 system image to a 2nd partition and dual boot.
Hi guys, my hd is gone. It was on a notebook. Thanks god I had a image system backup few days ago. Now... I'd like to dual boot that system on my desktop running Windows 7 and dual boot them. So can I reduce the size of my desktop hd, and then restore the system image from my laptop to...
Backup and Restore
System won't dual boot after a system restore in W7
Did a system restore in W7 and my dual boot system (W7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did...
Installation & Setup
Fixing Dual Boot Issue after System Restore
Ok, I am new to the forums here.. I had to do a system repair and a restore point due to getting the Vundo Virus. I had the black screen of death with the mouse cursor. Well I have the system up and running again. But here is the annoying thing. When the system boots up it goes to a black...
BSOD Help and Support
System restore points deleted on Win 7 in dual boot with XP
Because of the differences in the system restore technologies between windows 7 and windows XP, when booting out of XP and into Win 7 Pro the Win 7 restore points will have been deleted. My scenareo is XP - original system on first physical disk (boot loaders are here) and Win 7 on third physical...
Backup and Restore
System Restore not working @ Dual Boot
I have a Dual-boot configuration with a Windows XP Pro SP3 and a Windows 7 Ultimate. Every time I start the XP, it deletes all system restore points created by Windows 7, and the Win7 does the same with the restore points created by the XP. I've read on the internet that I had to turn on BitLocker,...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:29.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App