Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: MiniTool clone cannot boot up

29 Aug 2018   #21
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Bios will pick up the first active partition it sees.
You have an active partition on all 3 disks.
You can add both OS entries to all of them.

If you are booted into Disk1:

Find the drive letter of your windows partition on Disk3. It might be Z for example.

open admin cmd prompt and type:

bcdboot z:\windows

Then type

bcdboot c:\windows /s z:


My System SpecsSystem Spec
.
30 Aug 2018   #22
bertus3

Windows 7 Pro x64 SP1
 
 

Done, can again boot up in both.
As before when running the clone drive it sees the old/correct desktop but everything else is the current default. Screen shots below for info, note new L partition.


Attached Thumbnails
MiniTool clone cannot boot up-status-2.jpg  
My System SpecsSystem Spec
30 Aug 2018   #23
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Quote:
Done, can again boot up in both.
As before when running the clone drive it sees the old/correct desktop but everything else is the current default. Screen shots below for info, note new L partition.
Not easy to follow what you are trying to say. I suggest you do use nt6repair as described here.

It won't do any harm,and from what you have just posted, it should fix the issue.

Don't worry about the 100mb partition being assigned a letter. That is to be expected if it is not being used as the system partition.
My System SpecsSystem Spec
.

Reply

 MiniTool clone cannot boot up




Thread Tools




Similar help and support threads
Thread Forum
Clone Dual Boot on SSD
I have an older laptop with a 60GB drive and in a dual boot configuration of XP and Windows 7 32 bit. I ordered a 120GB SSD and Id like to make a clone of the existing drive on the SSD. I did some reading and Im now discovering this may not be so easy and is certainly not the same as cloning to...
Performance & Maintenance
How do I get my new clone drive to act as boot?
Hi, Stuck for hours and hoping somebody can help. I'll try and make this as short and succinct as possible. Ty in advance if anyone can help direct me. I have three drives: 0. New 1tb SSD to replace my smaller drive 2. 1. 1tb HDD for data. 2. 250gb SSD for windows and programs.
General Discussion
0x000000e during boot of clone
Hi forum, I imaged a computer with 7 Pro 64 bit and restored it to an old PC, but it does not boot. Short after beginning Windows boot process (when you see these flying coloured bullets and the Windows logo) the machine reboots. Again and again. I tried a lot of things: Repair-CD, bootrec /mbr...
Installation & Setup
How to Dual boot in Win 7 from clone?
Hi, I recently upgraded my harddrive as I needed the space and backed the old one up with macrium reflect then just copied everything to the new hard drive. i was thinking, I might uninstall most of the programs on my old drive and tweak it for use with pro tools 10 so that it runs better. ...
Installation & Setup
SSD Clone/MiniTool Partition problem and now OS won't boot up
Hello Rockstars, I tried to undertake a straightforward cloning operation and have accidentally dug myself into a hole which I don't know how to get out of. I have an old Kingston 64GB SSD drive which has my OS and programs. I tried to clone it to a new OCZ Vertex3 120GB SSD drive. After...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:36.
Twitter Facebook Google+