Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Recovery and OEM Partition didn't clone?

02 Feb 2019   #1
GrandmaGlowWorm

Windows 7 Home Premium 64bit
 
 
Recovery and OEM Partition didn't clone?

So I finally broke down and bought an SSD to use as my boot drive, and after looking at reviews, I settled on a Samsung 860 EVO 500GB. I used Samsung's Migration software (which was really fast surprisingly, even though I only had to clone about 200 GB) and the reboot worked flawlessly.

When I went to format my old HDD, I realized the once hidden Recovery (DELL) and OEM Partitions were now visible and, you guessed it, still on my old drive! After reading the manual on the Migration Tool, of course I now see that Samsung warns that it doesn't clone recovery/system reserve partitions.

So my questions are:

Is there anyway to move the Recovery and OEM Partitions over to my new SSD? Without doing a clean install of Windows 7?

Could I just keep the Recovery and OEM Partitions on the old HDD, and use them to recover Windows - even though the OS is longer attached to the drive?


Thank you for any help!




Attached Thumbnails
Recovery and OEM Partition didn't clone?-after-clone-format-both-drives-hooked-up-disk-management.jpg  
My System SpecsSystem Spec
.
03 Feb 2019   #2
iko22

Windows 7 x64, Vista x64, 8.1 smartphone
 
 

Hello, and welcome to Seven Forums


I am afraid the Samsung Migration software does not copy the OEM partition. You can create a System Repair Disk for Emergencies, if you are happy with that. Of course you can clone your SSD and use that to restore your computer.

Alternatively people have been using Aomei Backupper or Acronis True Image to migrate the OEM partition with the System Image.
My System SpecsSystem Spec
03 Feb 2019   #3
GrandmaGlowWorm

Windows 7 Home Premium 64bit
 
 

Thanks for the reply!

So - could I potentially use True Image or Backupper to move the OEM and Recovery partitions to my new C Drive, even though its already partitioned and has the OS on it?

If not, I will probably just create a System Repair Disk.
My System SpecsSystem Spec
.

03 Feb 2019   #4
Lady Fitzgerald

Win 7 Ultimate 64 bit
 
 

I had similar problems with Samsung's Migration Tool. It doesn't seem to be able to copy more than two partitions. I've since done the magration from HDD to SSD several times using Macrium Reflect Free (use this version; I saw a report of the latest version causing BSODs Download Macrium Reflect Free (64bit) 7.1.3317 for windows - Filepuma.com ).
My System SpecsSystem Spec
06 Feb 2019   #5
GrandmaGlowWorm

Windows 7 Home Premium 64bit
 
 

Funnily enough, I intended on using Macrium Reflect before realizing Samsung had its own Cloning software. Thought it would be best to use the company's own product for their SSD, but I guess not haha.

Thanks for your reply!
My System SpecsSystem Spec
06 Feb 2019   #6
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

There are plenty of 3rd party imaging cloning tools with free versions. Aomei, macrium, Easeus, paragon, etc

They are still doing O&O DiskImage Pro 11 ( usually not free - but is on giveaway ). It is good for advanced users - lots of options and functions.

If you are looking for something simple to operate, I suggest Aomei Standard (free) edition
Best Windows Backup and Restore Software | AOMEI Backupper
My System SpecsSystem Spec
Reply

 Recovery and OEM Partition didn't clone?




Thread Tools




Similar help and support threads
Thread Forum
Clone SSD or HDD from existing C: HDD, no OEM disks nor recovery ptn
Using Free Macrium (unless you advise otherwise) Can I create a clone of (C:\) a 250GB HDD onto 125GB SSD ? - not sure of sizes but for memory those sizes are correct - if in future I decide to use a new HDD (say 500GB) smallest around at the moment - can I clone the smaller capacity SSD...
Backup and Restore
didn't find any partition
Hi Jumanji, I've lost my kid's birth videos in my 2tb WD.. So glad I've found this thread, which is the only one I've found really helpful after two weeks of searching. I've downloaded Mini Partition Wizard and run it as follows: I've done most of the steps you outlined above, up to the...
Hardware & Devices
Recovery Partition clone
If I clone the Recovery Partition from hdd #1 to hdd #2 will hdd #2 reinstall 7 in the computer I pulled hdd #1 out of? 7 has been erased from hdd #1 hdd #1 has a damaged data connector and only works when I hold the cable in place. I'll be using adifferent computer and ext hdd enclosure. ...
Backup and Restore
How to compare clone of a partition with source partition
I just cloned two partitions from a resident HDD to an auxiliary Momentus XL HDD in an enclosure that is connected to the computer via eSATA. Is there a way to compare each cloned partition with its original for integrity? If this were just a file, I'd use a unix/cygwin utility like diff or cmp. ...
Backup and Restore
Windows 7 didn't recognize my 1TB NTFS partition
Hi guys, I've just installed windows 7 32bit RTM, and i was shocked when i found that my 1TB partition is not recognized by windows 7. In the Disk Management it appears as RAW and is not accessible in my computer, and whenever i click on the disk icon it tells me that it must be formatted!!!...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:16.
Twitter Facebook