Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Macrium utilities and tools for imaging: large capacity pen drives

3 Weeks Ago   #41

Windows 7 Professional 64-bit

"Just select the latest differential or incremental to restore and Macrium will do the rest."
I forgot all about that! Look how easy a restore has become :)

My System SpecsSystem Spec
2 Weeks Ago   #42

Windows 7 x64 Ultimate

Today I was able to at least look at what Windows 8 would have valuable enough to start to
use it for what an author called alternatives to Nuke And Pave: wipe the disk and reinstall everything. A good one.

But aside from Windows 8 having that new look which I can't stand, the Recover Techniques seem to be inferior: and it requires that the PC be working well enough to execute the repair commands.
After an electric out, the HD is way past that point.

I still have to do the initial steps but I have my hardware back where I can at least
work on the beginnings. I don't have a good thumb drive for it yet either.

In Year Zero of this, as I asked before, what is needed to run Macrium in hardware? Can I image to
a vacant SATA port and spare HD? That will be my question for now. Also on that spare HD should it be nuked and ready to pave?
My System SpecsSystem Spec
2 Weeks Ago   #43

Windows 7 x64 Ultimate
my FAT 32 Pendrive not showing

Just using what I have and on the first page of the Macrium how-to.

I have installed an old 320 HD without much used on it. I have a Sandisk FAT32 installed also as
a file holder-- not a Windows setup. So bare FAT32 just about. In Macrium, the illustration shows that if
Image This Disk is selected, the display should show both
NTFS HD and a smaller FAT32 device off to the side. My FAT32 Sandisk is not showing up.
But it registers fine in WIN7 Properties etc. I suppose I should get the exact size of the file content, but
when should the Sandisk show up?
My System SpecsSystem Spec


 Macrium utilities and tools for imaging: large capacity pen drives

Thread Tools

Similar help and support threads
Thread Forum
Imaging with free Macrium
This tutorial shows imaging with free Macrium Version 5.0. If you are still using Macrium Version 4.2, go to this Vimeo site where the tutorial of that version is stored. The Video does not show the recovery part because I have no setup to screen capture it. But Keith (Kado) made this excellent...
Recurrent BSODs while imaging with Macrium, or just using new printer
Hi, I have been suffering from recurring BSODs in the past months. I had (practically ?) never suffered BSODs before with this W7 install. Triggering events : After installation of a new Epson XP 245 inkjet printer, BSODs began happening without any obvious triggering event. It has happened...
BSOD Help and Support
Macrium Reflect - Cloning and Imaging?
Hi all, couple of days ago I had some difficulties with my SR not working which caused me a huge time waste of re-installation of windows. then I came here and you guys suggested me to use macrium and now I'm very happy with it. at this very moment I should be thankful to WHS, ignatzatsonic,...
Backup and Restore
Imaging-over to SSD?? Tools & tricks?
Guys, I will be buying another notebook soon, this one to replace my desktop. I have a shortlist and am just waiting to see how soon the next-gen models may hit In the past, for Windows 7 HDD-to-HDD image transfers, I have successfully used Paragon Backup & Restore to get a "bit for bit"...
Installation & Setup
Macrium Imaging Problem
Hi, I've encountered an issue using Macrium Reflect FREE x64 Version 4.2 Build 2952, and wonder if anyone can help me understand what is going on. I have used the very same version to image my C: and E: succesfully on a few occasions, using the existing XML defintion files. Now, however,...
Backup and Restore

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:14.
Twitter Facebook