Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Cloning SSD 120g to M.2 PCIe SSD

18 Dec 2019   #1
morgan23

Windows 7
 
 
Cloning SSD 120g to M.2 PCIe SSD

Can i clone a Kingston A400 SSD 120GB Serial ATA III to a Adata XPG SX8200 Pro 2TB M.2-2280 NVMe PCIe SSD.? saving having to reinstalling everything
Thanks


My System SpecsSystem Spec
.
18 Dec 2019   #2
F22 Simpilot

Windows 7 Ultimate x64
 
 

You should be able tpo use AOMEI Backupper, make a disk or USB drive with AOMEI and then boot that like you would to install Windows. Chose the source which would be your Kingston and the destination which would be your NVMe drive.

Once that is done, after you boot you'll more than likely need to go into Disk Management and extend the partition. Just make sure you unplug the Kingston once cloning is done.
My System SpecsSystem Spec
18 Dec 2019   #3
morgan23

Windows 7
 
 

Many thanks for you input will give it a try..
regards
My System SpecsSystem Spec
.

18 Dec 2019   #4
dg1261

Windows 7/8.1/10 multiboot
 
 

I'm not so sure this is necessarily a straightforward task, given the target is M.2/NVMe.

Windows needs a M.2/NVMe driver. While adding a M.2 as secondary to a working SATA boot drive may produce "found new hardware" and install the driver, that only works if the SATA remains the boot drive. I don't think that would allow the M.2 to become the boot drive unless one also embeds the driver in the boot.wim file. @SIW2 understands the boot process better, so he may know for sure.

Also, in my case the M.2 wasn't even recognized until I switched my BIOS setting from AHCI to RAID. It probably depends on the mobo, but since my Windows had been installed in AHCI, I ended up switching the BIOS to RAID and doing a clean install on the M.2 drive. YMMV, of course.
My System SpecsSystem Spec
18 Dec 2019   #5
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

AS dg1261 pointed out, win7 doesn't come with nvme drivers.

Unless adata has drivers for download - then you would need to integrate the win 7 nvme updates ( if you haven't already )- easier to install them before cloning.

https://www.sevenforums.com/attachme...me-win7x64.zip
My System SpecsSystem Spec
19 Dec 2019   #6
morgan23

Windows 7
 
 

I am very sorry gentlemen I am very appreciative of your replies only I forgot to state I am now running Windows 10.
I shall return to the corner and give myself a serious telling off!
What a berk!
Regards
My System SpecsSystem Spec
Reply

 Cloning SSD 120g to M.2 PCIe SSD




Thread Tools




Similar help and support threads
Thread Forum
Kingston SSDNow V300 120G f/w update
Hi All New to all this SSD stuff. Can anyone tell me if I can update the f/w on my drive from Windows whilst that drive is running the OS? John
Hardware & Devices
Running PCIe 3.0 Graphics Card on PCIe 2.0?
I'm strongly considering a P9X79 WS MOBO for the 40-48 PCIe lanes it has available (depending on who you are talking to; I want to run a GPU, an LSI Internal SATA/SAS 9211-8i 6Gb/s PCI-Express 2.0 RAID Controller Card, a couple of TV tuners and a WiFi card). Because of space constraints in the...
Graphic Cards
250G-HDD-Win7 Starter transfer to 120G-SSD?
Hi All, I have an Acer netbook and would like to put an Intel SSD in it. The current HDD is 250G but my budget only runs to a 120G SSD at $150. I have the HDD set up as two drives C: and D: Both C: and D: have about 22G of used space each, plus the PQService and MSR partitions, so 120G should...
Backup and Restore
pcie 2.0 video card on pcie 1.1 slot
I am planning to upgrade my video card. I saw this one from Nvidia. Geforce GTS 450. I checked the specs and i saw the "bus" and it says PCI-E 2.0 x 16. My motherboard(Asus P5G41T-MLX3) has PCIe x16. I also have researched that the PCIE is backward compatible meaning the GTS 450 is compatible with...
Graphic Cards
Computer Can't Find A PCIe Device (UAD 2 Quad PCIe Card)
Hello! I have a UAD Quad PCIe card (A card for music making, not a soundcard tho), which my computer can't find. It has a LED light that indictates that it's getting power from the computer and so on. System: Windows 7 32bit Proffesional Motherboard: Asus M4N68T CPU: AMD Phenom 3Ghz (4x)
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:43.
Twitter Facebook