Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: dns settings from acronis backup?

23 Dec 2009   #11
aem

Windows 7 Ultimate 64Bit
 
 

Can you provide your ipconfig /all details?


My System SpecsSystem Spec
.
25 Dec 2009   #12
bounce

windows 7 32bit
 
 

sure:

Physical Address. . . . . . . . . : 00-1A-6B-6A-D5-40
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d475:6bb:1bbc:bcb6%11(Preferred)
IPv4 Address. . . . . . . . . . . : 10.0.0.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, December 24, 2009 7:39:48 PM
Lease Expires . . . . . . . . . . : Saturday, December 26, 2009 7:39:48 AM
Default Gateway . . . . . . . . . : 10.0.0.1
DHCP Server . . . . . . . . . . . : 10.0.0.1
DHCPv6 IAID . . . . . . . . . . . : 234887787
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-88-E9-2A-00-1A-6B-6A-D5-40

DNS Servers . . . . . . . . . . . : 10.0.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled
My System SpecsSystem Spec
25 Dec 2009   #13
aem

Windows 7 Ultimate 64Bit
 
 

That is a very weird looking IP (10.0.0.2), are u sure it's valid? You don't have "Connection-specific DNS suffix", should also be given from your ISP. it's not listed?.
My System SpecsSystem Spec
.

25 Dec 2009   #14
bounce

windows 7 32bit
 
 

Hello, nope that's it. I'm not a novice at the networking side of things and likely the only way to find them out is from the ISP, which as mentioned before I can't right now.
I'm mostly curious where these settings are stored in a cloned image file? I have a backup image where they were correct in... That's my best bet, unless someone has a non-standard creative way of figuring them out (they aren't in the router settings page either)
My System SpecsSystem Spec
26 Dec 2009   #15
aem

Windows 7 Ultimate 64Bit
 
 

Well if you able to extract that clone image, see how you go with the event logs found in
C:\windows\system32\winevt\*.evtx
My System SpecsSystem Spec
26 Dec 2009   #16
bounce

windows 7 32bit
 
 

strange, I mounted the "XP" backup image and was able to navigate to the C:\windows\system32\ but the folder and file winevt\*.evtx aren't in there.
My System SpecsSystem Spec
26 Dec 2009   #17
aem

Windows 7 Ultimate 64Bit
 
 

I had this idea of advising you to google for these dns entries (or ip) back earlier but didnt want to say. Now would be the time i recon. Just google for the isp's dns info.
My System SpecsSystem Spec
26 Dec 2009   #18
bounce

windows 7 32bit
 
 

actually have that sitting right up in my bookmarks from a couple days ago. The DNS numbers didn't work, so I figured it was on an outdated webpage.

Not sure it was outdated now as DNS : Default looks like it's straight from Comcast, so maybe something else is wrong here.

Just wanted to see how it was all configured in the backup as that's when it was all working properly (before installing win7)

Thanks for the tips though, and seasons greetings to you.
My System SpecsSystem Spec
Reply

 dns settings from acronis backup?




Thread Tools




Similar help and support threads
Thread Forum
Can I use an old Acronis Full Backup and do incremental backup now?
I am using Acronis true image 11 I have created an full backup on 01 March 2014 and then scheduled incremental backup daily from 02 March 2014. Now (31 Aug 2014) my backup hard disk is full (the disk that store the backup), so I take out the backup hard disk that is already full and replace...
Backup and Restore
Acronis Backup Error
Ask for help, My computer has a problem with Acronis Backup software. When I tried backing up my hard drive, after running at 50%, "backup failed" error message appears, "job failed", can not read sector xxxxxx, failed in the i / o or R / W. Why does this failure happen?, What should I do?, Where...
Backup and Restore
Network Backup via acronis
I have a 2TB in my desktop that i use for backups. I have my desktop backed up onto it and my usb drives. I am using acronis so that i can create an image backup and i am trying to save it onto the network drive. The folder is shared using the advanced settings. When i select the network...
Network & Sharing
Acronis Settings
I have not been able to get Acronis to comply. Here's what I want it to do: Make Incremental backups throughout the week. Every Sunday, I want it to delete all the previous Incremental & Full Backups and Create a New Full Backup. I've been an Acronis user for years, but I am not able to...
Backup and Restore
Do you really need another backup program (Acronis)
Since Win 7 has a backup program, is there any reason to use Acronis True Image? I have an older version of True Image and can upgrade to True Image 2010 at the upgrade price, but is it really necessary to do that?
Backup and Restore
Acronis backup - Can't backup W7Libraries
Hi all I know a lot use Acronis backup -- I've been using it for ages and never had a problem with it However there is a defect (actually missing feature) in it that has a serious implication for Winsows 7 Users. 1) Say you have define a picture library. 2) imagine in the pictures library...
Backup and Restore


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:44.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App