Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on Dell Studio 15 1558

05 Aug 2010   #31
tonyvr4

Windows 7 Home Premium 64-Bit
 
 

I want to let everyone know that the problem is resolved and to offer many thanks.

The accelerometer driver must have been corrupted from day one since the laptop was never stable, until now thanks to you all.

I reinstalled the driver and it works great now. Thanks for all the help and perseverance required. Dell support didn't even know what a blue screen was when I spoke to them on the phone


My System SpecsSystem Spec
.
05 Aug 2010   #32
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Very good, Tony. Good work. I am pleased to hear you are running smoothly. Thank you for reporting back with your solution.
My System SpecsSystem Spec
16 Aug 2010   #33
tonyvr4

Windows 7 Home Premium 64-Bit
 
 
2 crash today

After many days of working without issue, there were two crashes today. It could have been related to the A08 BIOS

Immediately after these crashes I put the BIOS back to the previous version

Attached is the two minidumps. Any help is greatly appreciated

Thanks
My System SpecsSystem Spec
.

16 Aug 2010   #34
tonyvr4

Windows 7 Home Premium 64-Bit
 
 

Here is the info from the event viewer

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0xffffffffffffffd0, 0x0000000000000002, 0x0000000000000001, 0xfffff80002c866e0). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 081610-23649-01.

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0xffffffffffffffd0, 0x0000000000000002, 0x0000000000000001, 0xfffff80002c976e0). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 081610-17830-01.
My System SpecsSystem Spec
16 Aug 2010   #35
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Tony, since you rolled back the BIOS, lets see if you get any more crashes. Error code A is a hardware error. Usual causes are Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility. Because BIOS is a possibility. We need to see what rolling it back did.

The dumps are nearly identical and do not tell much. Both dumps reference memory.

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {ffffffffffffffd0, 2, 1, fffff80002c976e0}

Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: ffffffffffffffd0, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002c976e0, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002ec30e0
 ffffffffffffffd0 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!ObfReferenceObject+20
fffff800`02c976e0 f0480fc11f      lock xadd qword ptr [rdi],rbx

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  System

TRAP_FRAME:  fffff88003387a50 -- (.trap 0xfffff88003387a50)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000001 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002c976e0 rsp=fffff88003387be0 rbp=0000000000000001
 r8=0000000000000002  r9=0000000000000000 r10=fffff80002c1b000
r11=0000000000007532 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
nt!ObfReferenceObject+0x20:
fffff800`02c976e0 f0480fc11f      lock xadd qword ptr [rdi],rbx ds:3428:00000000`00000000=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002c8aca9 to fffff80002c8b740

STACK_TEXT:  
fffff880`03387908 fffff800`02c8aca9 : 00000000`0000000a ffffffff`ffffffd0 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`03387910 fffff800`02c89920 : 00000000`00000000 00000000`00000001 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`03387a50 fffff800`02c976e0 : fffffa80`000000cb 00000000`00000030 00000000`00000030 00000000`0000000b : nt!KiPageFault+0x260
fffff880`03387be0 fffff800`02d75afc : fffffa80`04ab3428 fffffa80`04ab3428 00000000`00000001 00000000`00000000 : nt!ObfReferenceObject+0x20
fffff880`03387c10 fffff800`02ef4daf : fffffa80`04ab3428 00000000`00000001 00000000`00000000 00000000`00007533 : nt!IopDisassociateThreadIrp+0x9c
fffff880`03387c40 fffff800`02f70a2b : 00000000`00000000 ffffffff`fffe7960 00000000`00000000 00000000`00000000 : nt! ?? ::NNGAKEGL::`string'+0x1e7aa
fffff880`03387c70 fffff800`02f7472d : 00000000`00000000 fffff800`02f2fc00 fffffa80`04ab3000 00000000`00000000 : nt!PspExitThread+0x58b
fffff880`03387d30 fffff800`02c69c26 : fffff880`009b1180 00000000`00000080 fffffa80`04ab3040 00000000`00000000 : nt!PspTerminateThreadByPointer+0x4d
fffff880`03387d80 00000000`00000000 : fffff880`03388000 fffff880`03382000 fffff880`033879c0 00000000`00000000 : nt!KxStartSystemThread+0x16


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!KiPageFault+260
fffff800`02c89920 440f20c0        mov     rax,cr8

SYMBOL_STACK_INDEX:  2

SYMBOL_NAME:  nt!KiPageFault+260

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4c1c44a9

FAILURE_BUCKET_ID:  X64_0xA_nt!KiPageFault+260

BUCKET_ID:  X64_0xA_nt!KiPageFault+260

Followup: MachineOwner
---------

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {ffffffffffffffd0, 2, 1, fffff80002c866e0}

Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: ffffffffffffffd0, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002c866e0, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002eb20e0
 ffffffffffffffd0 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!ObfReferenceObject+20
fffff800`02c866e0 f0480fc11f      lock xadd qword ptr [rdi],rbx

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  System

TRAP_FRAME:  fffff88009667a50 -- (.trap 0xfffff88009667a50)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000001 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002c866e0 rsp=fffff88009667be0 rbp=0000000000000001
 r8=0000000000000002  r9=0000000000000000 r10=fffff80002c0a000
r11=0000000000007532 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
nt!ObfReferenceObject+0x20:
fffff800`02c866e0 f0480fc11f      lock xadd qword ptr [rdi],rbx ds:3f48:00000000`00000000=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002c79ca9 to fffff80002c7a740

STACK_TEXT:  
fffff880`09667908 fffff800`02c79ca9 : 00000000`0000000a ffffffff`ffffffd0 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`09667910 fffff800`02c78920 : 00000000`00000000 00000000`00000001 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`09667a50 fffff800`02c866e0 : fffffa80`0000009d 00000000`00000030 00000000`00000030 00000000`0000000b : nt!KiPageFault+0x260
fffff880`09667be0 fffff800`02d64afc : fffffa80`051c3f48 fffffa80`051c3f48 00000000`00000001 00000000`00000000 : nt!ObfReferenceObject+0x20
fffff880`09667c10 fffff800`02ee3daf : fffffa80`051c3f48 00000000`00000001 00000000`00000000 00000000`00007533 : nt!IopDisassociateThreadIrp+0x9c
fffff880`09667c40 fffff800`02f5fa2b : 00000000`00000000 ffffffff`fffe7960 00000000`00000000 00000000`00000000 : nt! ?? ::NNGAKEGL::`string'+0x1e7aa
fffff880`09667c70 fffff800`02f6372d : 00000000`00000000 fffff800`02f1ec00 fffffa80`051c3b00 00000000`00000000 : nt!PspExitThread+0x58b
fffff880`09667d30 fffff800`02c58c26 : fffff800`02df4e80 00000000`00000080 fffffa80`051c3b60 00000000`00000000 : nt!PspTerminateThreadByPointer+0x4d
fffff880`09667d80 00000000`00000000 : fffff880`09668000 fffff880`09662000 fffff880`096679c0 00000000`00000000 : nt!KxStartSystemThread+0x16


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!KiPageFault+260
fffff800`02c78920 440f20c0        mov     rax,cr8

SYMBOL_STACK_INDEX:  2

SYMBOL_NAME:  nt!KiPageFault+260

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4c1c44a9

FAILURE_BUCKET_ID:  X64_0xA_nt!KiPageFault+260

BUCKET_ID:  X64_0xA_nt!KiPageFault+260

Followup: MachineOwner
---------
I do find some older drivers.
Quote:
Acceler.sys Fri Jun 26 16:56:34 2009
btwaudio.sys Wed Jul 01 09:54:56 2009
btwavdt.sys Thu Jun 25 01:50:13 2009
btwl2cap.sys Fri Apr 03 20:28:45 2009
btwrchid.sys Thu Jun 25 01:51:37 2009
CtClsFlt.sys Mon Jun 15 01:06:41 2009
rimspe64.sys Wed Jul 01 19:54:49 2009
risdpe64.sys Wed Jul 01 05:31:57 2009
rixdpe64.sys Sat Jul 04 06:27:00 2009
I can't say these drivers are causing the problem; but Win 7 generally does not like out of date drivers. See if you can update these drivers. If you need help, please post.
My System SpecsSystem Spec
16 Aug 2010   #36
tonyvr4

Windows 7 Home Premium 64-Bit
 
 

Will monitor it as requested. How would I find out what these drivers are for so that I can update them?

Thanks
My System SpecsSystem Spec
17 Aug 2010   #37
Jonathan_King

Windows 7 Professional x64
 
 

Search Google for the driver name, ending in .sys.

For example search for Acceler.sys, and see what it belongs to. Most drivers can be updated on the computer manufacturer's site, but some will have to be downloaded from the product manufacturer's site.
My System SpecsSystem Spec
17 Aug 2010   #38
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Acceler.sys - Accelerometer Port I/O is a driver file from company ST Microelectronics belonging to product Accelerometer Sensor Driver.

btwaudio.sys and btwavdt.sys - Broadcom Bluetooth Audio DeviceBroadcom.com - Downloads & Support

btwl2cap.sys and btwrchid.sys - See above

CtClsFlt.sys - Creative Camera Class Upper Filter DriverCreative Worldwide Support

rimspe64.sys, risdpe64.sys and rixdpe64.sys - RICOH Memory Stick drivers http://www.ricoh.com. There may not be updated drivers. This is older hardware.

Hope this helps.
My System SpecsSystem Spec
17 Aug 2010   #39
tonyvr4

Windows 7 Home Premium 64-Bit
 
 

I wasn't able to find drivers on any of the pages listed. I looked on the dell site and was only able to find an updated driver for the Ricoh card reader

System running and steady.
My System SpecsSystem Spec
17 Aug 2010   #40
CarlTR6

Windows 7 Ultimate 32 bit
 
 

That is good news! Good job on trying to find the drivers and updating the card reader drivers. Here's hoping you continue to run smoothly.
My System SpecsSystem Spec
Reply

 BSOD on Dell Studio 15 1558




Thread Tools




Similar help and support threads
Thread Forum
BSOD often, on my dell studio 1558, bccode fe, when i do something
Hi, i'm an italian boy, this is my first thread in sevenforums. My Notebook often restart with a BSoD, i've posting in zip in allegate the occurence do help me. can be the monitor? Because, often the BSoD start when i open or close my notebook's monitor. Help me, please.
BSOD Help and Support
BSOD On Dell Studio 1558 Laptop
Specs: Dell Studio 1558 Laptop Windows 7 Home Premium SP1 4GB of RAM 200GB free disk space (500GB drive) Had a few BSODs the last few days. The only one I caught was a BAD_POOL_CALL, while the others were realized by opening the laptop out of sleep/hibernate and instead of resuming Windows,...
BSOD Help and Support
BSOD on Dell Studio 1558
Hi, I am getting BSOD on my dell Studio 1558, I used to get this very frequently before upgrading graphics driver. After the upgrade the frequency reduced a lot. Yesterday it crashed again with BSOD, I followed instructions in post:...
BSOD Help and Support
BSOD - Windows 7 (64 bit) - Dell Studio 1558 - BugCheck 116
ISSUE: BSOD I bought this machine in July 2010 and I have been having BSOD and Black screen issues ever since. I have been on the phone with DELL 4 times. Two times they had me run a hardware test and the test always comes back with no issues.
BSOD Help and Support
Dell Studio 1558 - BSOD once per day
Hi all, I received my laptop two days ago and for two days i got a weird, glitchy BSOD. I tried updating the graphics card drivers and BIOS yesterday but today, unfortunately, it happened again, the same weird glitch looking blue page and then a restart. Attached are the two minidumps. Hope any...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:34.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App