Annoying Lock-ups.

Page 2 of 2 FirstFirst 12

  1. Posts : 2,963
    Windows 7 Professional SP1 64-bit
       #11

    According to what I've read, any time you use ram not on the approved list, your taking your chances, even if the timings, voltages, etc. match your boards requirements. But I'd wait for a second opinion before buying anything.
      My Computer


  2. Posts : 8
    Windows 7 x64
    Thread Starter
       #12

    According to what I've read, any time you use ram not on the approved list, your taking your chances, even if the timings, voltages, etc. match your boards requirements. But I'd wait for a second opinion before buying anything.
    I agree. I'd shell out some money to fix this, but only if I know it'll work.

    More information - as I mentioned earlier, audio always glitches out, producing a high-speed skipping sound when the crash occurs. However, sometimes when the system is doing several things at once, I'll get fleeting audio artifacts and a brief hang that resembles the lock-ups.
      My Computer


  3. Posts : 2,963
    Windows 7 Professional SP1 64-bit
       #13

    Akorahil said:
    More information - as I mentioned earlier, audio always glitches out, producing a high-speed skipping sound when the crash occurs. However, sometimes when the system is doing several things at once, I'll get fleeting audio artifacts and a brief hang that resembles the lock-ups.
    Sounds like a RAM or sound driver problem to me. Considering how this thread has gone, my money is on it being the RAM.
      My Computer


  4. Posts : 8
    Windows 7 x64
    Thread Starter
       #14

    Sounds like a RAM or sound driver problem to me. Considering how this thread has gone, my money is on it being the RAM.
    Thanks for your input. And yes - if it's a sound driver problem, I'm in trouble; the sound driver is a one-off, custom-made by Asus for this board. It's doubtful they'll bother to release new drivers for it.

    EDIT: Now upping the voltage on this RAM to 1.8; was previously running it at the low end of its rated voltages (1.7). It might make a RAM overheating issue more obvious, or mitigate instability from low voltage. I'm out of ideas here.
    Last edited by Akorahil; 01 Aug 2010 at 14:00. Reason: update
      My Computer


  5. Posts : 8
    Windows 7 x64
    Thread Starter
       #15

    Update: Upping the voltage on my ram to 1.8 seems to have worked! I'd read several reviews of this RAM since then stating that while it's rated for 1.7-1.8, if it gets any less than 1.8, it tends to go on the fritz. Problem solved, I hope.
      My Computer


 
Page 2 of 2 FirstFirst 12

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 23:50.
Find Us