Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD New Computer Windows 7 64Bit

08 Aug 2010   #51
tktk88

Windows 7 Pro 64 Bit SP1
 
 

Will do and thanks again for all your help and patience with this issue...........


My System SpecsSystem Spec
.
08 Aug 2010   #52
CarlTR6

Windows 7 Ultimate 32 bit
 
 

You are certainly welcome. That is what we are here for.
My System SpecsSystem Spec
09 Aug 2010   #53
tktk88

Windows 7 Pro 64 Bit SP1
 
 

Well the cold boot today went perfectly and memtest made 6 passes with no errors.......CyberPower is sending a replacement for the bad Ram life is good........thanks again for all your help!!!!
My System SpecsSystem Spec
.

10 Aug 2010   #54
CarlTR6

Windows 7 Ultimate 32 bit
 
 

I am delighted that you have found the problem and the solution! Great news. I hope the replacement RAM works perfectly! Let us know how your system is doing after you install the new RAM and maybe we can mark this one as solved.
My System SpecsSystem Spec
10 Aug 2010   #55
tktk88

Windows 7 Pro 64 Bit SP1
 
 

Thanks again......I will do a follow up post after getting the new Ram installed most likely by the time it arrives should be towards the end of the week........Its nice to be BSOD free!!!
My System SpecsSystem Spec
13 Aug 2010   #56
tktk88

Windows 7 Pro 64 Bit SP1
 
 

Just a follow up at this point I have been BSOD free since the last update......the new RAM has been shipped however they sent it UPS Ground from California so it doesn't arrive until the 18th...............will update after it is installed.........
My System SpecsSystem Spec
13 Aug 2010   #57
CarlTR6

Windows 7 Ultimate 32 bit
 
 

I am very glad you are BSOD free; and thank you for keeping us updated. I will wait until you install the new RAM before requesting this thread be marked as solved.
My System SpecsSystem Spec
17 Aug 2010   #58
tktk88

Windows 7 Pro 64 Bit SP1
 
 

Well all is good here no BSOD since last update computer still running fine.........the replacement RAM arrived today, however, they sent the wrong brand which doesnt match my exisiting Ram...I ahve read that exact matching Ram is important.......... so I have another call into them still waiting..........
My System SpecsSystem Spec
17 Aug 2010   #59
CarlTR6

Windows 7 Ultimate 32 bit
 
 

I do not recommend mixing brands of RAM. That is asking for problems. But it is certainly good to hear that you haven't had any more crashes.
My System SpecsSystem Spec
18 Aug 2010   #60
tktk88

Windows 7 Pro 64 Bit SP1
 
 

Latest update still BSOD free however i am experiencing different amounts of Ram being detected off and on typically again at cold boot. I have 10 megs in the computer right now still waiting on the replacement Ram. Sometimes windows and the bios will see 2 or 6 meg of ram and not the whole 10 meg. Typicaly after a reboot or 2 and the computer being warm it detects all of the ram. CPU-z will always see all of the ram even if windows and the bios is showing less than the total of 10 that is installed
My System SpecsSystem Spec
Reply

 Multiple BSOD New Computer Windows 7 64Bit




Thread Tools




Similar help and support threads
Thread Forum
Computer won't install windows 64bit OEM
Hello, I'm trying to install Windows 7 64 bit on my new build but everytime I try and boot from the optical drive, the system doesn't recognize the disk. I'm running a GIGABYTE ga-f2a88xn-wifi and an AMD athlon x4 760k and apparently installing 64 bit windows is a common problem for this mobo but...
Installation & Setup
Win7 Pro 64Bit BSOD upon waking Computer
I received a BSOD when I jiggled my mouse this morning. This happens about once a month. The computer is left alone at night. Then in the monring it does a BSOD. I am following your instructions to up load the dump file. However, I can't get the Performance Log Service to start. It gives me an...
BSOD Help and Support
BSOD during install on new computer 0x7e (Pro 64bit)
Hi, I just built a new computer and am trying to install Windows 7 Pro 64bit. Whenever I get to the screen when the logo first appears (directly after it says "loading files"), it blue screens. I am trying to install it with the official CD that I got from my college, but I also tried installing it...
Installation & Setup
Multiple BSOD - Win 7 Ult 64bit
Greetings all Was reading through numerous other BSOD threads and saw how helpful the folks were here so I'm really hoping that trend continues :) I'm currently building a new pc and have had constant BSOD over the last 10 days of testing. It seems to have shortly/immediately after...
BSOD Help and Support
Multiple BSOD on new build Home Premium 7 64bit
I have a pretty basic knowledge of system building, and I recently built a new system and have been having issues with BSOD while playing games. I haven't fiddled with any clock speeds, so everything should be running at core clock speeds. Any help that could be offered would be greatly...
BSOD Help and Support
BSOD with new computer running Windows 7 64bit
I have been searching for a solution to my random BSOD's and have not yet to find a solution. Tried running a program suggested to read minidump this is what it showed: ntoskrnl.exe ntoskrnl.exe+12cfe0 fffff800`02c4c000 fffff800`03229000 0x005dd000 0x4a5bc600 7/13/2009...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:27.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App