Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD, help please

11 Aug 2010   #41
CarlTR6

Windows 7 Ultimate 32 bit
 
 

OK, a clean install. That ought to help us get to the cause.

There was one dump file and, unfortunately, it is corrupt and doesn't tell us anything. The error code is D1, device driver. I could not view the device drivers in the dump. We will have to wait for another dump.

If you get another dump, please upload it. You won't need to up load the whole package, just the dump. https://www.sevenforums.com/tutorials...en-forums.html


My System SpecsSystem Spec
.
13 Aug 2010   #42
kuleee

Windows 7 Ultimate x64
 
 

ok, computer was running for 40 hours without any problems, but now 3min ago BSOD! take a look
My System SpecsSystem Spec
13 Aug 2010   #43
CarlTR6

Windows 7 Ultimate 32 bit
 
 

This is a Driver Verifier enabled dump. It blames win32k.sys and MSN Messenger. Most likely , neither of these are the real cause. The dump also shows memory corruption. Turn of Driver Verifier and lets start troubleshooting by testing to your RAM. Running 40 hours with Driver Verifier enabled with only one BSOD is a pretty good sign. Let's see how it does with Driver Verifier turned off.

Driver Verifier - Enable and Disable

Download a copy of
Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes. Errors will show up in red. Post your results and upload any new BSOD's




My System SpecsSystem Spec
.

13 Aug 2010   #44
kuleee

Windows 7 Ultimate x64
 
 

ok, i will leave this test AGAIN over night i've done this memory test for 2 times already... will tell you results in the morning. btw only thing that i am looking for on that test is some red lines?? when i decide to stop testing, on the bottom of the screen i have "no errors have been found" or something like that...
My System SpecsSystem Spec
13 Aug 2010   #45
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Yes, you are correct. No red lines - no errors. If you wish, you can skip Memtest for now and just use your system normally. That we can see if you get another BSOD. Make sure Driver Verifier is not enabled.
My System SpecsSystem Spec
14 Aug 2010   #46
kuleee

Windows 7 Ultimate x64
 
 

system didn't make it through the night. it crashed half hour after i was going to bed. here are the new file
My System SpecsSystem Spec
14 Aug 2010   #47
ttran

Microsoft Window 7 Professional 32 bit
 
 

Hi,

Your graphic card was blamed. Please download and install fresh copy of it. When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.

Update directx as well:
http://www.microsoft.com/downloads/d...displaylang=en

Code:
BugCheck D1, {29, 7, 0, 942ce598}

Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : dxgmms1.sys ( dxgmms1!VidSchiProcessIsrCompletedPacket+38 )

Followup: MachineOwner
---------
My System SpecsSystem Spec
14 Aug 2010   #48
kuleee

Windows 7 Ultimate x64
 
 

i already have latest ati driver 26.7.2010, there is NO newer driver for my card... i also have all those ATI utilities that i usually don't like to install and skip them while installing "driver only". do you suggest that i should delete driver and ati catalyst and reinstall it again?
My System SpecsSystem Spec
14 Aug 2010   #49
ttran

Microsoft Window 7 Professional 32 bit
 
 

Yes, I didn't know that you have done this before. But that what the DMP say and I have to suggest you what to do when I see that stop code and that driver blamed.
My System SpecsSystem Spec
14 Aug 2010   #50
Jonathan_King

Windows 7 Professional x64
 
 

Do you have another video card you can use? Perhaps borrow one from a friend, or pinch one off another computer.
My System SpecsSystem Spec
Reply

 BSOD, help please




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:48.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App