Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD, help please

17 Sep 2010   #81
Tews

64-bit Windows 8.1 Pro
 
 

I suggest you dont use the computer until you take care of your CPU... Good luck!


My System SpecsSystem Spec
.
17 Sep 2010   #82
Jonathan_King

Windows 7 Professional x64
 
 

Not that Tom's reputation is demanding this, but I second his advice. Get those temps down ASAP!
My System SpecsSystem Spec
17 Sep 2010   #83
kuleee

Windows 7 Ultimate x64
 
 

well im using computer now, when prime95 isn't running temp of cores are at 55-60C all the time. 65 max! only with prime95 does temperature get to 100C cpu is cooking goddammit with that program... i looked down on one of my last posts and i said my cpu temperatures are all the time at that point. that's not correct, they are that high only with prime95 working... my question is: with prime95 stress test and good cooling system, healthy CPU should work fine? in that case while stressing cpu, temeratures should reach which degree? cca?
My System SpecsSystem Spec
.

17 Sep 2010   #84
Jonathan_King

Windows 7 Professional x64
 
 

Even 60 is a bit high for comfort, with a desktop CPU.

We are just hoping the problems go away when your CPU cools down a bit.
My System SpecsSystem Spec
17 Sep 2010   #85
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Hi kulee. No insults; we have all been noobs and made mistakes. You would not believe some of the stupid things I have done.

Tom's and Jonathan's advice is spot on. I would not run my machine until I had gotten thermal paste and taken care of the CPU. Please keep us posted.
My System SpecsSystem Spec
18 Sep 2010   #86
kuleee

Windows 7 Ultimate x64
 
 

hi

i bought the paste and apply it. first, i cleaned cpu and cooler of old paste and then applied new one. now when i start computer i expected temperatures to fall down a bit, but they didn't. they are still at cca 60C all the time. but i started that video card stress test and im worried... here is the screen shot

http://img521.imageshack.us/img521/6729/30931293.jpg

test is still working, average GPU temperature is 98C, processors are at 88C (first core) and 90C (second core)... should i stop the test? btw i don't see any anomalies or artifacts on screen during the test
My System SpecsSystem Spec
18 Sep 2010   #87
kuleee

Windows 7 Ultimate x64
 
 

well i needed to stop after 24min of stress testing the GPU, cause of my CPU temps got to 99C and i decided to shut down test! any new suggestions? is my power supply to weak?
My System SpecsSystem Spec
18 Sep 2010   #88
Jonathan_King

Windows 7 Professional x64
 
 

Are you using any case fans, or just the PSU fan?

I advice upgrading your PSU, really. Not only do PSUs fail over time, but 400W to start out with is pretty low.

Check out this page: eXtreme Power Supply Calculator

See what it recommends. In the meantime, I'll contact some experts and see what PSU they recommend for you.
My System SpecsSystem Spec
18 Sep 2010   #89
kuleee

Windows 7 Ultimate x64
 
 

when i put all my spec's into that, it calculates that i need 230W (or something), not even near 400W. btw i reinstalled windows... AGAIN. but now into win7 ultimate 64bit. of course 2 bsods in 2 hours, so take a look. its obvious that processors are NOT overheating, cause temperatures before bsod were below 50C (i think at 47C)...
My System SpecsSystem Spec
18 Sep 2010   #90
kuleee

Windows 7 Ultimate x64
 
 

and btw im not using any special fans in my computer at all. all fans inside are stock fans, including psu fan (gpu and cpu too are stock fans)
My System SpecsSystem Spec
Reply

 BSOD, help please




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:05.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App