New
#31
You should have your RAM installed in the two white slots, from the CPU the 2nd and 4th slots.
Page 18 of your MOBO manual, slots DDR3_1 and DDR3_3.
Be sure that your grounded before you move the RAM, use a grounding wrist strap. This will prevent static electricity from damaging your hardware.
First, let's bump the memory DRAM voltage.
MB Intelligent Tweaker(M.I.T.) > Advanced Voltage Settings > DRAM Voltage, set to 1.55v.
Run memtest86+ now and if it passes, run it again at cold boot.
Let us know the results.
Check the memory controller voltage:
MB Intelligent Tweaker(M.I.T.) > Advanced Voltage Settings > QPI/Vtt Voltage
It should be at 1.150v. in 'Auto'.
Last edited by Dave76; 11 Aug 2010 at 10:01.