Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 200+ bsod

18 Aug 2010   #21
deeptrouble

Win7 64bit
 
 

Latest BSOD.

This is after my driver update for my Broadcom network card.

What to do now?

Update graphics driver?
Remove BACS3?
Run verifier?


My System SpecsSystem Spec
.
18 Aug 2010   #22
CarlTR6

Windows 7 Ultimate 32 bit
 
 

My System SpecsSystem Spec
18 Aug 2010   #23
deeptrouble

Win7 64bit
 
 

Carl you are right. I just had a look at C:\Windows\Minidump and there was no file as I asumed.

Sorry for the noise.

It is a matter of time before I will have one though :-)
My System SpecsSystem Spec
.

18 Aug 2010   #24
deeptrouble

Win7 64bit
 
 

I played around with verifier.exe pounding on my non-microsoft drivers.

It turns out that gmnusb.sys is an offender. BSOD before login.
My System SpecsSystem Spec
18 Aug 2010   #25
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by deeptrouble View Post
I played around with verifier.exe pounding on my non-microsoft drivers.

It turns out that gmnusb.sys is an offender. BSOD before login.

Correct


Gmnusb.sys Garmin's USB driver from 2009. Try upgrading, or removing
My System SpecsSystem Spec
18 Aug 2010   #26
deeptrouble

Win7 64bit
 
 

Such a shame. I loved that GPS gadget and I already got the newest driver. Im killing it off. Bye bye Garmin.

When i got my rather oudated nvidia drivers checked in Verifier.exe my pc is unable to boot to login. I just sits at the welcoming screen with the glowing microsoft mark. The fancy graphics keeps going but it never goes to login. Im trying to update to the latest NVIDIA drivers.
My System SpecsSystem Spec
18 Aug 2010   #27
deeptrouble

Win7 64bit
 
 

Updated my NVIDIA drivers to 258.96. Ran verifier on the NVIDIA-related drivers.

First boot: BSOD

Second boot: Halt at the shining microsoft mark like the old driver.

Third boot: Everthing is fine.

Strange..

Attached: BSOD dump & ntbtlog(probaly fro the second boot)
My System SpecsSystem Spec
18 Aug 2010   #28
CarlTR6

Windows 7 Ultimate 32 bit
 
 

This was a Driver Verifier enabled dump with an error code of D3.

D3 - DRIVER_PORTION_MUST_BE_NONPAGED. Caused by a device drive. This indicates that the system attempted to access pageable memory at a process IRQL that was too high.

The dump blames a Microsoft core system driver, which in all probability is not the culprit.
Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Owner\AppData\Local\Temp\Temp1_canofworms5.zip\081910-21387-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02e0d000 PsLoadedModuleList = 0xfffff800`0304ae50
Debug session time: Wed Aug 18 22:00:38.955 2010 (GMT-4)
System Uptime: 0 days 0:00:10.141
Loading Kernel Symbols
...............................................................
...................
Loading User Symbols
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D3, {fffff88000ece824, 2, 0, fffff80002eaa662}

Probably caused by : ntkrnlmp.exe ( nt!RtlDispatchException+122 )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_PORTION_MUST_BE_NONPAGED (d3)
When possible, the guilty driver's name (Unicode string) is printed on
the bugcheck screen and saved in KiBugCheckDriver.
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers marking code or data as pageable when it should be
marked nonpaged.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff88000ece824, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff80002eaa662, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030b50e0
 fffff88000ece824 

CURRENT_IRQL:  2

FAULTING_IP: 
nt!RtlDispatchException+122
fffff800`02eaa662 410fb60c24      movzx   ecx,byte ptr [r12]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP

BUGCHECK_STR:  0xD3

PROCESS_NAME:  System

TRAP_FRAME:  fffff8800335fcc0 -- (.trap 0xfffff8800335fcc0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff88000ec0558 rbx=0000000000000000 rcx=fffff88000ece834
rdx=fffff88000ece7e4 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002eaa662 rsp=fffff8800335fe50 rbp=fffff88003360cf8
 r8=0000000000000072  r9=000000000000004d r10=fffff880033612e0
r11=fffff8800335fe98 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
nt!RtlDispatchException+0x122:
fffff800`02eaa662 410fb60c24      movzx   ecx,byte ptr [r12] ds:00000000`00000000=??
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002e7cb69 to fffff80002e7d600

STACK_TEXT:  
fffff880`0335fb78 fffff800`02e7cb69 : 00000000`0000000a fffff880`00ece824 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`0335fb80 fffff800`02e7b7e0 : 00000000`000000d7 00000000`00000040 fffff800`02fccb2c fffff800`02e5a387 : nt!KiBugCheckDispatch+0x69
fffff880`0335fcc0 fffff800`02eaa662 : fffff880`00ece824 fffff880`0335fe98 fffff880`03360cf8 fffff880`00eba000 : nt!KiPageFault+0x260
fffff880`0335fe50 fffff800`02eb78df : fffff880`03360cf8 fffff880`03360560 fffff880`00000000 00000000`00000000 : nt!RtlDispatchException+0x122
fffff880`03360530 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDispatchException+0x16f


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!RtlDispatchException+122
fffff800`02eaa662 410fb60c24      movzx   ecx,byte ptr [r12]

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  nt!RtlDispatchException+122

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4b88cfeb

FAILURE_BUCKET_ID:  X64_0xD3_VRF_nt!RtlDispatchException+122

BUCKET_ID:  X64_0xD3_VRF_nt!RtlDispatchException+122

Followup: MachineOwner
---------
I suggest you turn Driver Verifier off and lets see what your system does.
My System SpecsSystem Spec
19 Aug 2010   #29
Jonathan_King

Windows 7 Professional x64
 
 

Install these 2 drivers:

Drivers and Downloads

Drivers and Downloads

See if the problem goes away.
My System SpecsSystem Spec
19 Aug 2010   #30
deeptrouble

Win7 64bit
 
 

Hello guys.

I just installed the two driver updates suggested by JK. Now im just waiting to see if its gonna BSOD again..

I had memtest86 running while I was sleeping: 9 runs, no errors.

I got a few questions for you.

How do read those minidump-files?

Do you use verifier to test all your driver updates?

I lost my sound somewhere in the update frenzy. Installing the newest driver from dell doesnt help. The installation seem succesfull but I have a red cross over my sound icon in the right corner. Translated from danish the error message is "no installed sound output unit" There is nothing unusul in my device list. What to do?
My System SpecsSystem Spec
Reply

 200+ bsod




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:15.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App