Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: new install, various BCCs

27 Aug 2010   #11
Thonnas

Windows 7 Home Premium 64 bit
 
 

Had another stop error. BCC 50. Swapped out the RAM and going to trade it in tomorrow.

Here's the dump.


My System SpecsSystem Spec
.
27 Aug 2010   #12
reventon

Windows 7 x64, Windows XP SP3, Fedora
 
 

Hi,

Yes, my recommendation based on these BSODs would have been to swap out the RAM too.

See how it goes from here on.

Regards,
Reventon

BUGCHECK SUMMARY
Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sat Aug 28 09:52:26.923 2010 (GMT+12)
System Uptime: 0 days 13:02:45.531
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : hardware ( nt!ExDeferredFreePool+f13 )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x3B
PROCESS_NAME:  eclient.exe
Bugcheck code 0000003B
Arguments 00000000`c0000005 fffff800`0316061c fffff880`0757b700 00000000`00000000
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Aug 27 20:08:29.634 2010 (GMT+12)
System Uptime: 0 days 1:22:40.491
*** WARNING: Unable to verify timestamp for aswTdi.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswTdi.SYS
Probably caused by : aswTdi.SYS ( aswTdi+14e0 )
BUGCHECK_STR:  0xc9_226
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  System
Bugcheck code 000000C9
Arguments 00000000`00000226 fffff880`07b9d4e0 fffff980`1e754af0 00000000`00000000
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Aug 27 15:11:28.107 2010 (GMT+12)
System Uptime: 0 days 5:19:06.933
Probably caused by : ntkrnlmp.exe ( nt!KiRetireDpcList+13d )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xA
PROCESS_NAME:  hl2.exe
Bugcheck code 0000000A
Arguments 00000000`00000008 00000000`00000002 00000000`00000001 fffff800`02cd6b7d
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Thu Aug 26 10:50:57.937 2010 (GMT+12)
System Uptime: 4 days 15:50:10.763
Probably caused by : HDAudBus.sys ( HDAudBus!HdaController::Isr+43b )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x3D
PROCESS_NAME:  System
Bugcheck code 0000003D
Arguments fffff880`02f8afd0 00000000`00000000 00000000`00000000 fffff800`02c73f1a
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
My System SpecsSystem Spec
31 Aug 2010   #13
Thonnas

Windows 7 Home Premium 64 bit
 
 

No errors yet with the known good RAM. Got the bad stuff replaced (and upgraded even). Gunna give it a go now.

Thanks for the help, guys.
My System SpecsSystem Spec
.

Reply

 new install, various BCCs




Thread Tools




Similar help and support threads
Thread Forum
Win7 install - fast copy/backup during install (harddisk failure)
Hi My laptop has two particitions, C and D. C seems to have quite some bad sectors. Ran chkdsk yesterday for whole day and it marked out some bad sectors. Now when I do fresh install to drive C, installation cannot complete. Once copying from DVD is over, I can pass the "starting windows"...
Installation & Setup
After Win7 Repair Install & Office 2007 fresh install; no permissions!
I had a run-in with MS Office 2007 that ended up (my bad I'm sure) necessitating a repair install of Windows 7 (64 bit) after a complete uninstall of Office. The Windows repair went well with the exception of a couple of drivers; easily adjusted. Then I did a clean install of Office 2007. It...
Software
BSOD on fresh install when install updates, misc error codes
My system info is in my profile, installing Windows 7 x64 Ultimate Retail. Attached is all of the report info. I have no idea what is going on. Whenever I try to install all of the Windows updates it blue screens. Then it will reboot, try to apply the updates, and blue screen again. I've run...
BSOD Help and Support
Help BSODs ntoskrnl.exe-70470 with various BCCs
My first build ever: about 3 months old Smooth sailing at first, but I've begun to see a consistent BSOD a couple of minutes into a game that ran perfectly well until about a week or two ago, as well as a some BSODs in a few other high load scenarios now. BlueScreenView shows a bunch of different...
BSOD Help and Support
[BSOD] Constant Bluescreens. Various BCCs
Hi, I've recently formatted my computer and did a fresh install of Win7 64 bit to take advantage of my 6gb of memory. For the first 3 weeks everything was smooth, until I started getting multiple blue screens during full screen gameplay. It seems a little intermittent, I can play some...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 13:13.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App