Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win7 64bit E1K62x64.exe Crash

02 Sep 2010   #1
SavellM

Windows 7 Enterprise 64bit
 
 
Win7 64bit E1K62x64.exe Crash

Hey Guys,

Im constantly having thise BSOD about once a day.
From what I have read its to do with my NIC, but I have the latest NIC drivers from Dell.

Is Windows 7 . . .
- x86 (32-bit) or x64: 64bit
- the original installed OS on the system: Yes, and have reformatted a number of times
- an OEM or full retail version: OEM

- What is the age of system (hardware): 2 Weeks
- What is the age of OS installation: Fresh
I have attached the BSOD folder as asked.
If you would like any more info let me know


My System SpecsSystem Spec
.
02 Sep 2010   #2
jcgriff2

Windows 7 - Vista
 
 

Hi -

Update your Intel 82577LM Gigabit NIC driver - v 15.5 out 29 July 2010 - from the Intel Download Center -
Code:
e1k62x64.sys Tue Apr 06 03:37:39 2010 (4BBAE4C3) - http://downloadcenter.intel.com/Sear...t+Ethernet+PHY
Intel Download --> http://downloadcenter.intel.com/Sear...t+Ethernet+PHY

I would advise that you remove NIS/ 360 from your system --> NIS/ N360 Removal -- jcgriff2.com

If BSODs persist, run the Driver Verifier --> Driver Verifier - jcgriff2.com

Windbg Logs
--> http://jcgriff2.com/dbug_logs/_99-db..._jcgriff2_.txt
--> http://jcgriff2.com/dbug_logs/_99-db...riff2_.txt.zip

Regards. . .

jcgriff2

`

BSOD BUGCHECK SUMMARY
Code:
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Thu Sep  2 08:44:16.441 2010 (GMT-4)
System Uptime: 0 days 1:53:30.906
BugCheck D1, {90, 2, 1, fffff8800468d353}
*** WARNING: Unable to verify timestamp for e1k62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1k62x64.sys
Probably caused by : e1k62x64.sys ( e1k62x64+1b353 )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
Bugcheck code 000000D1
Arguments 00000000`00000090 00000000`00000002 00000000`00000001 fffff880`0468d353
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
My System SpecsSystem Spec
02 Sep 2010   #3
SavellM

Windows 7 Enterprise 64bit
 
 

Cheers mate.

Updated my NIC drivers so will see how this goes.
I cannot remove NIS as its a company laptop.

And if it persists I will run the driver verifyer.

Thanks again
My System SpecsSystem Spec
.

03 Sep 2010   #4
SavellM

Windows 7 Enterprise 64bit
 
 

No luck.

I got another BSOD when I was copying files from my network share drive to a USB stick.

With the same E1K62x64 BSOD error message.
I am running the latest Intel NIC drivers (15.5) i think it was.

I am using the laptop on a Docking Station, so I tried to replicate this by copying large files from the network but no crash

Seems to just happen randomly.

Attached is a fresh dump.
My System SpecsSystem Spec
03 Sep 2010   #5
Jonathan_King

Windows 7 Professional x64
 
 

Your Intel wireless drivers still show April 6, 2010 as the date. Try installing these drivers again: Software License Agreement

If that doesn't work, I would suggest contacting your manager and see about removing NIS. Perhaps you can convince him to let you remove it, and reinstall it if it doesn't help matters.

...Summary of the Dumps:
Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Sep  3 05:26:03.193 2010 (UTC - 4:00)
System Uptime: 0 days 2:31:34.932
BugCheck D1, {90, 2, 1, fffff8800481b353}
*** WARNING: Unable to verify timestamp for e1k62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1k62x64.sys
Probably caused by : e1k62x64.sys ( e1k62x64+1b353 )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
My System SpecsSystem Spec
03 Sep 2010   #6
SavellM

Windows 7 Enterprise 64bit
 
 

Hey Jonathan,

Thanks, I have installed the latest Intel Drivers for Wirless.
Let me uninstall it reboot and re-install.

If it still continues, I will remove NIS, as these laptops are my test builds so I can do what I need to do.
My System SpecsSystem Spec
03 Sep 2010   #7
SavellM

Windows 7 Enterprise 64bit
 
 

Hey Jonathan,

I uninstalled the Intel Wireless, and then rebooted, and re-installed the wireless from the Intel site.
But the driver date is still showing 31/05/2010, but on the Intel Site it shows driver version 02/07/2010.

Am I doing something wrong?
Should I uninstall in Safe Mode, restart and Re-Install in Safe Mode?
My System SpecsSystem Spec
03 Sep 2010   #8
SavellM

Windows 7 Enterprise 64bit
 
 

Do you really think it could be beacuse of NIS?
If so I will do a complete format and clean install and this time not install NIS.

What you think?
My System SpecsSystem Spec
03 Sep 2010   #9
SavellM

Windows 7 Enterprise 64bit
 
 

Ok I just got a totally different BSOD.
Here is what happened, I was using my NIC at 100mbps so swapped it over to 1gbit port so its running full capacity.

Wifi was turned OFF...

Started copying large files off the server, and poof, BSOD, but this time different.
This one just said Bad_Pool something and a stop code of C1 instead of the old D1.

Attached is a fresh dump log.
Is it the same thing?
My System SpecsSystem Spec
03 Sep 2010   #10
Jonathan_King

Windows 7 Professional x64
 
 

Still, it blames your Intel wireless card. Try disabling it in Device Manager, and see what happens.

NIS (especially older versions), is well known for causing BSODs in the BSOD-analyst community. Since it is surely monitoring all network activity, it would not surprise me at all if it were the case here.

Once you actually disable the Intel wireless card in Device Manager, or physically remove or turn off the card, the drivers should stop getting loaded. A reboot will likely be required after disabling it.
Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\DOCUME~1\JK\LOCALS~1\Temp\Temporary Directory 2 for Windows_NT6_BSOD_jcgriff2.zip\Windows_NT6_BSOD_jcgriff2\090310-30529-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02e07000 PsLoadedModuleList = 0xfffff800`03044e50
Debug session time: Fri Sep  3 05:27:38.120 2010 (GMT-5)
System Uptime: 0 days 1:00:20.396
Loading Kernel Symbols
...............................................................
................................................................
..........................................
Loading User Symbols
Loading unloaded module list
........
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {90, 2, 1, fffff88004676353}

Unable to load image \SystemRoot\system32\DRIVERS\e1k62x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for e1k62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1k62x64.sys
Probably caused by : e1k62x64.sys ( e1k62x64+1b353 )

Followup: MachineOwner
---------
My System SpecsSystem Spec
Reply

 Win7 64bit E1K62x64.exe Crash




Thread Tools




Similar help and support threads
Thread Forum
how transfer data from win7 64bit to win xp 64bit?
how transfer data from win7 64bit to win xp 64bit? I searched on google but not found anything, no software. I also tried WET 7xp-64bit but not working.
Network & Sharing
BSOD Winxp 64bit, Win7 Pro 64bit many error codes
Hi every one, i have this machine which is causing too much headache for me, this machine was having Windows XP 64 Bit, and it had a lot of BSOD crashes, then i just decided that it's the time to make the move to Windows 7 for this high performance machine, since i was not able to upgrade to...
BSOD Help and Support
Win7 32bit Home Premium to Win7 64bit Ultimate: Possible without Clean
I just bought a ThinkPad T400, and 8GB DDR3 upgrade kit. After first log on, I realized the Windows 7 is 32bit. How can I upgrade to Ultimate x64 instead? Thanks for your help.
Installation & Setup
VOLSNAP.SYS Crash and then other issues WIN7 64bit
Hi, been having a real bum of an issue, my system has a mild overclock on it but it has been tested thoroughly using Intel Burn Test on maximum settings, OOCT linpack for an hour, Hyper PI, well you name it, its been tested with and all comes up A ok. When I play F1 2011, everything is fine, I...
BSOD Help and Support
Win7 64bit E1K62x64.exe Crash
i've gotten this error randomly. help me please. my computer is Lenovo Thinkpad X201 Windows ultimate 64bit NOT the original installed OS age of system:almost new age of OS installation: almost new
BSOD Help and Support
HTPC Win7 Pro 64bit Crash
Attached is the minidump from my crash. This system has been up and running fine since the launch of Win 7 on Oct 22nd. It seems to have occured when going to sleep mode. If someone gets time can you take a look at the minidump and give me an idea what may be the problem, thanks.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 18:21.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App