Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Blue screen help

13 Sep 2010   #1
DocPsycho

Windows 7 Ultimate 32 bit
 
 
Blue screen help

I recently installed my new desktop PC and operating os Windows 7 Ultimate 32 bit OEM SINCE 1 week and Not so OFTEn this blue Screen pops up and restart the pc i can log on windows this is the error report

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 3073
Additional information about the problem:
BCCode: 100000b8
BCP1: 82D44280
BCP2: 871ECA58
BCP3: 82D37FD0
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\091310-17472-01.dmp
C:\Users\mohanad\AppData\Local\Temp\WER-42182-0.sysdata.xml

I dont know wehther SOFTWARE or HARDWARE problem


My System SpecsSystem Spec
.
14 Sep 2010   #2
usasma
Microsoft MVP

 
 

Unfortunately, the Windows Debugging Tools aren't able to access symbols for your operating system files (in particular NTOSKRNL.EXE / NTKRNLMP.EXE / NTKRNLPA.EXE / NTKRPAMP.EXE) from the Microsoft Symbol Server - so that makes debugging them difficult if not impossible.

Please do the following (this will not affect the analysis of the current files - but it may help later files that are acquired):
- activate/validate the Windows installation at Genuine Microsoft Software
- run sfc.exe /scannow to replace any problem files
- open a support incident with Microsoft to see if they can fix the missing symbols issue ( Windows 7 Solution Center )
- If that doesn't fix it, then wipe the hard drive and reinstall Windows
- don't use "leaked"/torrent builds

please remove or update these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall OR remove:
Quote:
How To Find Drivers:
- I have listed links to most of the drivers in the code box below. Please use the links there to see what info I've found about those drivers.
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.
- - The most common drivers are listed on this page: Driver Reference
- - Driver manufacturer links are on this page: http://www.carrona.org/drvrdown.html

Here's the older drivers (You can look them up here: http://<a href="http://www.carrona.o... Reference</a> ).
Please pay particular attention to any dated 2008 or earlier:
Code:
lpwdm.sys    Wed Oct 26 10:19:46 2005
st330.sys    Wed Oct 26 10:19:47 2005
stbus.sys    Wed Oct 26 10:19:47 2005
steth.sys    Mon Oct 24 07:28:12 2005
These drivers are for your Thompson Speedtouch USB modem. They are most likely the cause of your problem. You MUST get (and install) the latest Win7 drivers for this modem.

If fixing those drivers doesn't fix the BSOD's, then post back and we'll do some more testing. The BSOD's seem to be pointing at hardware, but we can't be certain until we rule out the 2005 drivers.

BSOD BUGCHECK SUMMARY
Code:

*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Mon Sep 13 04:15:43.889 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:21.356
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck 100000B8, {82d44280, 871eca58, 82d37fd0, 0}
*** WARNING: Unable to verify timestamp for RTKVHDA.sys
*** ERROR: Module load completed but symbols could not be loaded for RTKVHDA.sys
Probably caused by : RTKVHDA.sys ( RTKVHDA+1b046e )
BUGCHECK_STR:  0xB8
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Mon Sep  6 19:12:05.794 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:22.886
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck 100000B8, {82d36280, 86f9bd48, 82d29fd0, 0}
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for SCSIPORT.SYS - 
Probably caused by : SCSIPORT.SYS ( SCSIPORT!ScsiPortGetUncachedExtension+4163 )
BUGCHECK_STR:  0xB8
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Mon Sep  6 10:24:12.631 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:26.114
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck 100000B8, {82d84280, 870d0938, 82d77fd0, 0}
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ndis.sys - 
*** WARNING: Unable to verify timestamp for Rt86win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt86win7.sys
Probably caused by : Rt86win7.sys ( Rt86win7+1b41 )
BUGCHECK_STR:  0xB8
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Fri Sep  3 17:22:27.748 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:21.841
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck 100000B8, {82d35280, 86a92d48, 82d28fd0, 0}
*** WARNING: Unable to verify timestamp for RTKVHDA.sys
*** ERROR: Module load completed but symbols could not be loaded for RTKVHDA.sys
Probably caused by : RTKVHDA.sys ( RTKVHDA+1b046e )
BUGCHECK_STR:  0xB8
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Sun Aug 29 10:25:48.712 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:24.805
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck 100000B8, {82b86280, 868b1030, 82b79fd0, 0}
Probably caused by : ntkrnlpa.exe ( nt+67966 )
BUGCHECK_STR:  0xB8
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Sat Aug 28 15:28:39.997 2010 (UTC - 4:00)
System Uptime: 0 days 0:03:16.464
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck 100000B8, {84a982a8, 8670e938, 9d301fd0, 0}
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for SCSIPORT.SYS - 
Probably caused by : SCSIPORT.SYS ( SCSIPORT!ScsiPortGetUncachedExtension+4163 )
BUGCHECK_STR:  0xB8
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Sat Aug 28 15:08:22.403 2010 (UTC - 4:00)
System Uptime: 0 days 0:07:05.870
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck 100000B8, {82b37280, 868c2d48, 82b2afd0, 0}
*** ERROR: Symbol file could not be found.  Defaulted to export symbols for ndis.sys - 
*** WARNING: Unable to verify timestamp for Rt86win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt86win7.sys
Probably caused by : Rt86win7.sys ( Rt86win7+1b41 )
BUGCHECK_STR:  0xB8
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Built by: 7600.16385.x86fre.win7_rtm.090713-1255
Debug session time: Sat Aug 28 13:29:40.036 2010 (UTC - 4:00)
System Uptime: 0 days 0:09:30.503
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
BugCheck 1000008E, {c0000005, 84b69d49, 8078af40, 0}
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BUGCHECK_STR:  0x8E
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
  
  
 
 
My System SpecsSystem Spec
Reply

 Blue screen help




Thread Tools




Similar help and support threads
Thread Forum
Unable to start - black screen or empty blue screen w cursor??
Hello, My laptop will not boot. I end up with an empty black screen or a blue screen with no icons, just a cursor. I get choices for 'normal startup' or ' repair' but not safe mode. Any help appreciated.
General Discussion
Geforce 7300 LE - Blue screen of death - Multiple lines down screen.
Today I booted my computer up to be promoted with a black screen, I gave it a good half an hour before forcing it to shutdown, to which when I booted it back up. Was then promoted with a blue screen about the video card not being able to lead, that happened twice. I then booted it into safe...
Graphic Cards
Blue Screen Error but no actual blue screen pops up
While using my laptop, usually when trying to open some "windows" application such as task manager, wireless networks, documents, media player, windows updater etc. my laptop freezes or doesn't allow me to click on anything except the minus button on all my windows and the start button. I'll try to...
BSOD Help and Support
Blue Screen out of the Blue, Was working fine for 9+ hours then c...
Well i had my computer on all day since i woke up @ 8 in the morning gaming and what not. It had finally crashed on me while i was playing dirt 2 a couple of mins ago. I had fixed all my previouse blue screen problems by not using any AMD OverDrive Settings for my Radeon HD 4850. My specs...
BSOD Help and Support
Help with blue screen auto reboot, Stop: 0x0000007B error screen
Hello, I have an HP Pavilion g series laptop (running win7) that is in a continuous restarting loop. This happened after the computer auto updated (windows update). I do not know what was updated, but now every time the laptop starts up it seems to be in a continuous rebooting loop after the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 15:46.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App