Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD. When converting raw,dng to jpeg

23 Sep 2010   #11
disgo55

XP Pro & win 7
 
 
BSOD. When converting raw,dng to jpeg

Quote   Quote: Originally Posted by Jacee View Post
thanks,but i don`t have dvdfab installed.


My System SpecsSystem Spec
.
23 Sep 2010   #12
disgo55

XP Pro & win 7
 
 
BSOD. When converting raw,dng to jpeg

Quote   Quote: Originally Posted by Wishmaster View Post
disgo55,

Running MEMtest at this point would be a good idea.

Do you have a Temprature monitoring utility? Im curious what the Temps are.

Also, would you mind running CPUZ and posting snips of the Memory, SPD, and CPU tabs please.
(Found Here: CPUID - System & hardware benchmark, monitoring, reporting )
Wishmaster,here you go,& thanks
My System SpecsSystem Spec
23 Sep 2010   #13
Wishmaster

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by disgo55 View Post
Quote   Quote: Originally Posted by Wishmaster View Post
disgo55,

Running MEMtest at this point would be a good idea.

Do you have a Temprature monitoring utility? Im curious what the Temps are.

Also, would you mind running CPUZ and posting snips of the Memory, SPD, and CPU tabs please.
(Found Here: CPUID - System & hardware benchmark, monitoring, reporting )
Wishmaster,here you go,& thanks
Thank you.


The Sumout error obviously points to a problem. Sometimes making adjustments can help resolve the issue.
But, you arent overclocked so that points to other likely issues. It could be a bad CPU, but lets be sure.

-->Bios are the version they should be
-->RAM is running where it should be. (Although knowing what the RAM voltage is set at would be nice)

I am slightly concerned about the temps.
In your snip of CPUZ, was that at idle? If so, what do the Temps look like after a minute or two of Prime95?

At this point it may be best to wait and see what the Memtest results are, and go from there.
My System SpecsSystem Spec
.

23 Sep 2010   #14
disgo55

XP Pro & win 7
 
 

Hi here is a image of memtest86
My System SpecsSystem Spec
23 Sep 2010   #15
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Hello,

I think it's the Bad Memory since the MemTest86+ gave you error in second pass itself. If it cover warranty send for replacement.

- Captain
My System SpecsSystem Spec
23 Sep 2010   #16
disgo55

XP Pro & win 7
 
 

Quote   Quote: Originally Posted by Capt.Jack Sparrow View Post
Hello,

I think it's the Bad Memory since the MemTest86+ gave you error in second pass itself. If it cover warranty send for replacement.

- Captain
thanks Captain. would you take a look at my bios settings? & tell me what you think. Thank you
My System SpecsSystem Spec
23 Sep 2010   #17
Wishmaster

Windows 7 Home Premium 64bit
 
 

I agree w/Captn.


If I were you at this point, I would re-run MEMtest.

Except this time, test each stick 1 at a time.

Try to see if you can pinpoint which RAM module it is, or if its the MOBO DIMM slot.
My System SpecsSystem Spec
24 Sep 2010   #18
disgo55

XP Pro & win 7
 
 

sorry Wishmaster,but how do i do that ? When memtest boots up,it goes right into doing its thing.
My System SpecsSystem Spec
24 Sep 2010   #19
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

You can look at this tutorial, it will explain how to run memtest86+, and test RAM and motherboard slots.


You will have to open your computer and take all but one RAM card out, start the test and follow the tutorial, Part 3: If You Have Errors:

Let us know the results.


Can you check in your BIOS for the DDR2 Voltage Control setting, from your Pics it shows 'Normal', you may have to select manual to see what the current voltage is.

Also, it is much easier for us if you use the snipping tools and post the pics, that way we can all see the information and not have to D/L the files.

At the start button, search box, type 'Snipping tool', click enter, then select the part of the screen you want to post, save to a convient place.

My System SpecsSystem Spec
Reply

 BSOD. When converting raw,dng to jpeg




Thread Tools




Similar help and support threads
Thread Forum
BSOD while converting vid file to DVD, dxgkrnl.sys
I was using ConvertX2DVD to convert a MP4 vid to DVD so my son can watch it. I use this program most conversions to dvd. I then switched inputs and checked the TV for a recording, then after about 10 minutes I switched back to the PC and found it with BSOD, with a dxgkrnl.sys file as the culprit. ...
BSOD Help and Support
.jpeg is missing
hi, i just noticed a weird thing??..when viewing my jpegs it use to show the filename along with the .jpeg after it..now it just shows the filename only..but if i leave my mouse over the image it show it?? any ideas why this happened??:p thanks rip
Music, Pictures & Video
BSOD while converting CR2 files to TIFF
Every time I try to convert cr2 files (RAW files from my canon 60D) to TIFF or JPG. Ill include the dump file
BSOD Help and Support
BSOD when converting/playing videos
x86 32 Operating System Windows 7 Professional Full Retail Age of System: 2 years Age of OS installation: 3 months The BSOD Technical Information are as follows: STOP:0x00000124 BSOD normally occurs when converting videos using Xilisoft video converter ultimate which uses all cores of...
BSOD Help and Support
BSOD while converting video files
I cannot generate a system health report even though the Performance Logs & Alerts service is running (An error occured while attempting to generate the report). I've attached a dump of the BSOD files. I've had 4 BSOD's within the past few days. The two most recently were back to back. As with most...
BSOD Help and Support
JPEG, now you see it...
now you don't. Basically, I save a JPEG onto desktop. I know I have. I open Windows Explorer, I see it on there. If I am looking flat straight at desktop----which only has two icons it..I don't see it. Now why would that be?
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 18:00.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App