Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Frequent BSOD's.. at wits end :(

27 Sep 2010   #31
mrflib

Windows 7 64 Bit Home Premium
 
 

Ok, first step I have uninstalled the Dlink adapater from Device manager. Then I had a bit of a facepalm moment as I realised in doing so I was unable to use the actual installer to uninstall the software. I've therefore deleted the files held within, including the infamous AirNCFG.exe which no longer loads on boot.

I have done a windows search for anodlwfx.sys and it can no longer be found. I have also disabled anything from dlink in msconfig in the startup section. This includes WZCSKDR2.exe, which is according to my research something to do with dlink. I have not however deleted the files just in case.

I am now running on a wired connection to the router, though the missus is incredibly unhappy with this situation so I don't know how long it will last.

For good measure, and I don't know if this will be of any use or entirely superfluous, I have redone my initial reports for you. See attached.

I guess we'll see how things run for a while. If I find it to be something as simple as this I will hit the roof! Then I'll be happy and drink beer.

Thanks again for all your help. I will keep you posted. Please let me know if there's anything else you want me to do.


My System SpecsSystem Spec
.
27 Sep 2010   #32
CarlTR6

Windows 7 Ultimate 32 bit
 
 

You are certainly welcome and I hope the solution is this simple.

Now that everything is running smoothly, create a restore point or a system image or both. Reinstall your D-Link adapter without the configuration program and let Windows configure it. Be sure to change the startup files. You may find it necessary to physically remove the adapter, reboot, shutdown, put the adapter back in, and install from scratch.

I am very interested to know if this solves the problem. Please let us know.
My System SpecsSystem Spec
27 Sep 2010   #33
mrflib

Windows 7 64 Bit Home Premium
 
 

Ok Carl - will do. I think what I may do is run this on the cable for a little while longer. No BSOD's yet, but it's early days. If I can get a good amount of time stable I will do exactly as you say. I will let Windows Update install the necessary drivers. I will certainly be back to give feedback!
My System SpecsSystem Spec
.

27 Sep 2010   #34
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Looking forward to a good report without BSOD's attached. When you reinstall the adapter, let windows configure the wireless settings; don't install the configuration tool.
My System SpecsSystem Spec
27 Sep 2010   #35
mrflib

Windows 7 64 Bit Home Premium
 
 

Will do. I will plug it in, let it install, reenable all of the msconfig files I disabled for startup, reboot and carry on. System Restore point first, of course!
My System SpecsSystem Spec
27 Sep 2010   #36
mrflib

Windows 7 64 Bit Home Premium
 
 

Alas, BSOD.

My System SpecsSystem Spec
27 Sep 2010   #37
mrflib

Windows 7 64 Bit Home Premium
 
 

And another, this one while trying to install .net 4.0.

Edit: High frequency BSODs now!!! Argh!
My System SpecsSystem Spec
28 Sep 2010   #38
mrflib

Windows 7 64 Bit Home Premium
 
 

Gents,

Unfortunately BSOD's are now so frequent the PC is completely unusable. I am going to be forced to completely format and start again. I am now getting Bugcheck 50, 3B and 109 every couple of minutes.

To be quite honest I am really quite downhearted about the situation, I'm half tempted to break up the PC and sell the components.

Does anyone know a reputable, experienced technician or company in the London area of the UK who could diagnose and fix my errors? The professionals I have so far hired have not been equal to the task, much like myself.

Thank you all for your help so far. I will be back once formatted - which might be best as we can start on a completely clean system.

Pete
My System SpecsSystem Spec
28 Sep 2010   #39
reventon

Windows 7 x64, Windows XP SP3, Fedora
 
 

Quote   Quote: Originally Posted by mrflib View Post
Hi Reventon,

I haven't had a chance to run Prime/Memtest since reinstall - unfortunately a lot of work has come up and I've needed the PC for other things. However, I did run IntelBurnTest - which failed. I was advised this tested CPU and RAM?



If you think I should still run the tests I can do memtest this evening and run prime overnight?
The above test uses a different test method to Prime95 (both are valid).

I would re-run the BurnInTest and if you get the same result take it to a local technician who is willing to put a working CPU in it for testing purposes.

Of course - if it's not the CPU that's faulty, the next most likely component is your motherboard.

Don't know any good technicians in London sorry!

Good luck
My System SpecsSystem Spec
28 Sep 2010   #40
mrflib

Windows 7 64 Bit Home Premium
 
 

Hi Reventon,

Thanks for the response. I have just reformatted completely and have taken the following actions:
  1. Installed Windows 7
  2. Let Windows Update get my Graphics Drivers and the default security updates it does on first boot
  3. Updated the ATK0110 file from the Asus Website
  4. Running on a wired connection - no Dlink adapter
  5. Run the reports suggested by this forum
  6. Additionally I have upped the voltage of the RAM in the BIOS from the default to 1.64V (DRAM Bus). BIOS was previously flashed to latest version.
  7. As you can see the BIOS default the RAM to a slower speed than their spec - I have 1600 RAM. I assume this would not be an issue?
  8. I have taken screenshots of CPU-Z
  9. I have provided a SIW report and WinAudit in addition to your standard requests. These are in the attached zip file.
  10. Attached 2 BSOD crash dumps that have already occured.
Before I can take this to a technician I want to at least get the basics of this system correct. As you can see from the reports, and my below Device Manager screenshot a couple of devices do not yet have drivers. Where is the correct place to download them from?

ATK0110 Driver at present


Device Manager at present


CPU-Z Screenshots







I realise I'm being a royal pain in the butt here, but I really don't know what else I can do. It seems you guys are my only hope.

Thank you all again for your extended time.
My System SpecsSystem Spec
Reply

 Frequent BSOD's.. at wits end :(




Thread Tools




Similar help and support threads
Thread Forum
At wits end with BSOD's
Hi everyone, i have been plagued with constant bsod's for the last few months, i'll start from the beggining... I purchased a second hand graphics card from ebay and after a few weeks of using it i started getting the bsod's, my temp's were fine all my drivers were up to date, i ran chkdisk and...
BSOD Help and Support
Routine BSOD's at wits end
Good Afternoon, I have been getting BSOD's for weeks now crash files show its always one of these 3 ( usually the last 2) msahci.sys, ntoskrnl.exe, ntoskrnl.exe. it seems to usually happen when I am on the internet. I have attached the Zip file from the win 7 Diag diag tool. ...
BSOD Help and Support
BUGCODE_USB_DRIVER BSOD (At my wits end)
Hey guys first time posting but I really need some help. my computer has been BSODing randomly lately with BUGCODE_USB_DRIVER. I tested all my us drivers and they seem fine. Tested my ram and did some stress tests and no errors. I even scanned my hard drive and no issues there either! Here are...
BSOD Help and Support
BSOD 1033--at my wits' end
And not that many wits left! Attached is the diagnostic info you requested. In addition: Is Windows 7 . . . - x86 (32-bit) - the original installed OS on the system? XP3 - an OEM or full retail version? new OEM I purchased and installed - What is the age of system (hardware)? c. 2...
BSOD Help and Support
Consistent bsod, at wits end.
Upon plugging in my phone my system now bsods, I've attempted to remove anything that may have changed in the past week and have removed all usb root hubs and allowed them to re-initialize, as I believe this may be the cause of the problem. I've also used usbdeview to check for conflicts, and...
BSOD Help and Support
Various BSOD, at wits end :(
OK I put my specs in my profile but here is what I have.... AMD Phenom 9850, ASUS M3A78-EMH HDMI Motherboard, (both bought roughly a year and a half ago) The following items are all brand new. 8G (4x2G) DDR2 800 RAM, NVIDIA GTX 260, ACER GD235HZ, 500W Power supply. Windows 7 HP x64. Before...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:30.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App