Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 90% after every windows start!

25 Sep 2010   #1
klaz

Windows 7 Premium x64
 
 
BSOD 90% after every windows start!

Hello everyone,

It has been around 2 weeks now since I installed Windows 7 and from the second I inserted the CD I had nothing but problems. The after loading the disc and starting the install screens, the computer would just stop along with the cd drive as if everything halted.
Anyway after several attempts and several freezes during install I managed to install them successfully.

Now I am facing the problem that my computer will not start properly without some kind of BSOD. However after one or two manual restarts, and maybe a system startup repair if i have the time, it works. Once I enter the desktop, from then on nothing is wrong. All is running smoothily, apart from yesterday. After playing suddenly it froze and restarted. The same goes for my USB Logitech mouse, that since the win install it freezes for a sec and you hear the USB sound, as if it was unplugged and plugged again.

Everything is updated, from Windows to all the devices with the latest updates. Even the motherboard BIOS.

The only changes I made before installing windows 7 was add a new 1TB hard drive, a sata dvd drive, and 4GB (2x2GB) memory sticks in dual channel mode.

I also noticed that even though my motherboard and the memorys i have run natively on 1066MHz, I had to reduced them to 800MHz otherwise I think my system would not load windows without a 100% error or BSOD.

I have attached the files I read that are needed.

Here are some info on my system:

Windows 7 Premium build 7600 x64 RETAIL
Hardware components, the oldest is 2 years old roughly
OS installation 2 weeks old.

If you have any suggestions or advice I would be very happy.

Thanx


My System SpecsSystem Spec
.
26 Sep 2010   #2
usasma
Microsoft MVP

 
 

perfmon and MSINFO32 reports show issues with these devices:
Code:
Standard PS/2 Keyboard    ACPI\PNP0303\4&23F9C1E3&0    This device is not present, is not working properly, or does not have all its drivers installed.

Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller #2    PCI\VEN_11AB&DEV_4364&SUBSYS_81F81043&REV_12\4&45B69F9&0&00E2    This device is disabled.
Do you use a PS2 keyboard?
Is the second ethernet port deliberately disabled?
Please check Device Manager to see if these devices are listed as having problems there.

Because of the number of different BSOD's, I'd suggest starting with these free, bootable diagnostics:
Quote:
H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link)

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Malware (read the details at the link)
Please remove Catalyst Control Center and Daemon Tools from your system as they can cause issues with Win7. Feel free to reinstall them, if needed, AFTER we're finished troubleshooting.

Please update your Wacom(tablet) Mouse Filter driver:wacommousefilter.sys Fri Feb 16 13:12:17 2007

12 memory dumps from 11 to 25 Sep 2010 (2 weeks)
7 different BSOD errors blaming 7 different causes
I'd suspect that this was a hardware error, so please complete the diagnostics mentioned above.

BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sat Sep 25 08:26:25.700 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:23.386
*** WARNING: Unable to verify timestamp for avipbb.sys
*** ERROR: Module load completed but symbols could not be loaded for avipbb.sys
Probably caused by : avipbb.sys ( avipbb+88f3 )
BUGCHECK_STR:  0xc2_7_AVBR
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  svchost.exe
Bugcheck code 000000C2
Arguments 00000000`00000007 00000000`00001097 00000000`00050104 fffff8a0`02a3be70
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Sep 24 20:26:45.824 2010 (UTC - 4:00)
System Uptime: 0 days 4:06:34.884
BugCheck D1, {fffffa0005e1d3c8, 2, 1, fffff88004005b3d}
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::UnreferenceDmaBuffer+7d )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
Bugcheck code 000000D1
Arguments fffffa00`05e1d3c8 00000000`00000002 00000000`00000001 fffff880`04005b3d
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Sep 24 02:04:26.794 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:22.854
Probably caused by : ntkrnlmp.exe ( nt!CmpGetContextAnchorForThisThread+26 )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x50
PROCESS_NAME:  services.exe
Bugcheck code 00000050
Arguments fffff83f`02c7b198 00000000`00000000 fffff800`02deae06 00000000`00000005
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Sep 22 03:00:15.931 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:24.991
Probably caused by : win32k.sys ( win32k!bConvertFontRes+1dc )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x50
PROCESS_NAME:  csrss.exe
Bugcheck code 00000050
Arguments ffffffff`f9c10749 00000000`00000001 fffff960`000965c4 00000000`00000002
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Sep 21 17:27:29.255 2010 (UTC - 4:00)
System Uptime: 0 days 1:25:05.315
Probably caused by : ntkrnlmp.exe ( nt!IopDeleteFile+24b )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  System
BUGCHECK_STR:  0x7E
Bugcheck code 1000007E
Arguments ffffffff`c0000005 fffff800`02d978bb fffff880`031fc898 fffff880`031fc100
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Sep 20 16:14:57.873 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:32.558
Probably caused by : cdd.dll ( cdd!CddPresentBlt+74 )
PROCESS_NAME:  csrss.exe
BUGCHECK_STR:  0x7E
DEFAULT_BUCKET_ID:  NULL_CLASS_PTR_DEREFERENCE
Bugcheck code 1000007E
Arguments ffffffff`c0000005 fffff960`000d8430 fffff880`033fa028 fffff880`033f9890
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Sep 17 15:37:03.830 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:09.890
Probably caused by : ntkrnlmp.exe ( nt!ExpSystemErrorHandler2+5ff )
BUGCHECK_STR:  0xc0000221
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  System
Bugcheck code C0000221
Arguments fffff8a0`003fb6d0 00000000`00000000 00000000`00000000 00000000`00000000
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Thu Sep 16 02:19:19.761 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:23.821
Probably caused by : memory_corruption
DEFAULT_BUCKET_ID:  CODE_CORRUPTION
BUGCHECK_STR:  0x50
PROCESS_NAME:  csrss.exe
Bugcheck code 00000050
Arguments fffffa7f`86e8194e 00000000`00000000 fffff880`040e433e 00000000`00000007
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Sep 15 15:17:17.831 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:19.517
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+a56 )
BUGCHECK_STR:  0x19_3
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  System
Bugcheck code 00000019
Arguments 00000000`00000003 fffffa80`05177300 fffffa00`05177300 fffffa6c`05177300
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Tue Sep 14 15:53:32.850 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:48.910
Probably caused by : win32k.sys ( win32k!FindTimer+82 )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x50
PROCESS_NAME:  csrss.exe
Bugcheck code 00000050
Arguments fffff931`c0154168 00000000`00000000 fffff960`00197672 00000000`00000005
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Sep 13 02:09:44.136 2010 (UTC - 4:00)
System Uptime: 0 days 0:00:53.821
Probably caused by : ntkrnlmp.exe ( nt! ?? ::NNGAKEGL::`string'+6368 )
BUGCHECK_STR:  0x1a_31
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  WUDFHost.exe
Bugcheck code 0000001A
Arguments 00000000`00000031 fffffa80`07e0f410 fffff880`0e1fd000 fffff8a0`08b4f36d
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sat Sep 11 14:14:01.663 2010 (UTC - 4:00)
System Uptime: 0 days 0:01:45.349
Probably caused by : win32k.sys ( win32k!GreSelectRedirectionBitmap+1c5 )
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x50
PROCESS_NAME:  explorer.exe
Bugcheck code 00000050
Arguments fffff960`011a5b40 00000000`00000008 fffff960`011a5b40 00000000`00000002
จจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจจ``
  
  
My System SpecsSystem Spec
26 Sep 2010   #3
klaz

Windows 7 Premium x64
 
 

Hi usasma,
thank you for the help!

90% of the time I restart, I get a BSOD. So also because of the 1066 to 800mhz reducement that I had to do, I decided to remove the 2x1GB memory sticks and and go back to 1066mhz with my remaining 2x2GB. It has booted normally without error today. I will give it a bit more time to make sure and then I will put them back if there is a problem and run those tests you gave me. They seem very long.

I am using a Logitech USB keyboard, connected to a usb port. I have also downloaded and installed the latest hardware for it again.

The Marvel Yukon connection I have disabled intentionally since I am not using it. I have also downloaded the latest drivers and applied them to both Ethernet connectors.

I have also re-downloaded and re-installed the latest wacom drivers.

Fingers crossed it works now, but for some strange reason i think its the new memory i bought... hope Im wrong
My System SpecsSystem Spec
.

26 Sep 2010   #4
usasma
Microsoft MVP

 
 

If it BSOD's with the extra RAM, then run the MemTest with the extra RAM installed.
That'll tell you if it's a problem.

Then try the MemTest without the extra RAM - that'll tell you if it's the extra RAM/those slots that are the problem.
My System SpecsSystem Spec
26 Sep 2010   #5
klaz

Windows 7 Premium x64
 
 

Right this is weird.
I hope I dont confuse you as well. I went ahead and run the mem test even though i stupidly forgot to uninstall daemon and Catalyst control centre. I quess its ok as i run the test from the cd before even windows loads.

Ok i have 4 slots (0,1,2,3) both running on dual channel 1066mhz (slots 0 and 2 have the Kingston 2GB sticks) (slots 1 and 3 have the 1GB Corsair XM2)
I run the test for some hours and I noticed a massive amount of errors on test 7 pass 1. I could not figure out which slot was responsible from the error reports. I choose selective test and select test 7. The second it reaches pass 1 errors start appearing everywhere.
Turned off the workstation and removed the 1GB sticks (slots 1,3). I run the test 7 and on pass 1 no errors.
I remove all memory and test one stick of 1GB on the first slot (0). Again test 7. no errors.
I try on the first slot again the other 1GB stick on test 7. Nothing. Wierd.
I put the both on the original slots when the errors occurred (slots 1,3). No errors
I decided to put the all again on the same slots as on the first run (slots 0 & 2 with the 2GB and slots 1 & 3 with the 1GB). To my surprise nothing, nada, no errors, WTH?
So i say okay then i will leave it on 1066mhz and just boot into win7. Again it boots with no errors..... is it playing with me or is it just me?
Anyway im gonna give it a couple of restart over the days and see how it behaves. Maybe there was dust on the slots? Dont know.
But I do know that my mouse is still playing tricks on me. It sort of freezes for 2 seconds and windows plays the sound of disconnecting and connecting a USB device. (my mouse is a usb one.) The funny thing is that its a simple mouse, so i have no drivers for it, but windows has detected it as a logitech mouse. I have only installed drivers for my keyboard which happens to be the same brand.

What do you think of all this weirdness?
My System SpecsSystem Spec
26 Sep 2010   #6
madtownidiot

 

Mixing types of RAM will cause all kinds of problems, especially RAM with different native clock speeds. I'm amazed you even got past POST.

I've also seen all sorts of problems with USB devices in windows 7 as well, probably caused by the fact that windows 7 is unnecessarily designed to stop USB connections during boot. ....probably in a misguided effort by Microsoft to prevent a successful windows installation to a USB HDD, because I have a working linux installation on an external HDD. I would recommend reinstalling windows with just the 2x2GB memory installed, as it would probably take less time to reinstall than it would to fix all the issues you'll likely to have
My System SpecsSystem Spec
27 Sep 2010   #7
klaz

Windows 7 Premium x64
 
 

Sorry for not explaining correctly. All 4 sticks have 1066 native speeds. They are different brand but working on dual channels each. Even their CAS Latencies are the same.
Slots:
0 - 2GB Kingston
1 - 1GB Corsair XM2
2 - 2GB Kingston
3 - 1GB Corsair XM2
My System SpecsSystem Spec
27 Sep 2010   #8
usasma
Microsoft MVP

 
 

My very first experience with RAM was telling a customer that I thought that his motherboard was bad - but (luckily) suggesting that he get a second opinion. It turns out that the RAM merely needed reseating.
It saved the guy several hundred dollars!!!

As for the USB mouse, borrow a mouse from another system and see if it behaves the same way.
If it does, try other USB ports to see if it still behaves that way.
Let us know what you find out.
My System SpecsSystem Spec
Reply

 BSOD 90% after every windows start!




Thread Tools




Similar help and support threads
Thread Forum
BSOD windows start up.
I have a dual boot windows 7/linux (xubuntu) HP laptop, but BSOD on windows start up. I can access windows drive through linux fine. Windows recovery environment hasn't been able to help yet, memory is fine. For some reason I can boot linux .iso's like grub off the usb but not windows or windows...
BSOD Help and Support
BSOD after Windows start-up
Hey guys, hope you can help me. Blue screen appears right after the desktop starts loading. Safe mode worked fine until just now - whenever I try to open a page in a browser - it crashes again. Attached debug info. BugCheck 1E, {ffffffffc0000005, fffffa80056323ef, 0, fffa003c} BCCode: 1E BCP1:...
BSOD Help and Support
BSOD after windows 7 Pro start up
Hi I hope you can help me, every time I boot my pc it loads windows and then I get the BSOD. The error message is STOP: 0x0000007F (0x00000008,0x8F503750,0x00000000,0x00000000). I can start up into Safe Mode and have no problems. I have run the Memory Test for 8 passes with no problems. ...
BSOD Help and Support
BSOD trying to start Windows, gets to desktop then BSOD, then reboots
Hi guys, I encountered BSOD for the first time. Very annoying. Right now I have to run this on Safe Mode in order to access the internet. I also noticed I can't use Firefox right now, and instead am using iE. I couldn't run the the performance scan report either (time out?), but I did attach the...
BSOD Help and Support
BSOD before windows start
Hi, since 8 months i've been using windows 7 (64 bit) i've never had a blue screen... Now I cant even use windows normally, before Windows user login screen, y get the BSOD IRQL not less than or equal, and restart. In safe mode, the background are all black, no bars, only the mouse pointer, and...
BSOD Help and Support
BSOD on windows 7 start up
Hey guys Having some problems with my computer blue screening on me when it goes to launch the OS (this problem happens before I make it to the log in screen). Usually it goes to a system repair and then asks me to do a system restore. I dont have to actually do a system restore and it normally...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

ฉ Designer Media Ltd

All times are GMT -5. The time now is 02:35.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App