Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Help

30 Sep 2010   #1
groedius

Window 7 32 bit
 
 
BSOD Help

Ok well after believing I could fix the issues on my laptop myself with me being an 2nd year computer science student, and having an decent knowledge of computing. I have finally decided that I need to seek the advice of some others on helping me with this problem. I am back at University now and need to get my laptop functioning properly again as a matter of urgency.

Main issue is that I either get BSOD when i am running my laptop does not seem to occur after I do anything in particular and it can be 1 of a few BSODs or sometimes Windows will lock itself up so I have to turn off the power and then restart when it restarts it will go to load up windows. The windows logo will then show up and then it will BSOD and restart automatically and be stuck like this. It gives me the option to start up repair and restore and will also work in Safe mode if I hit F8 when it boots up. I was informed that if this is so it is usually an driver issue but I was lead to believe that I had downloaded and put on all the latest drivers when I had switched over which I got from the HP website.

https://www.sevenforums.com/crashes-d...tructions.html

Task 3 gives me

Error:

An error occured while attempting to generate the report.
The system cannot find the path specified.

Laptop is about 2 years old and originally came with Vista on it I changed this to a version of windows 7 32 bit because Vista kept having trouble with an product key and HP did not want to help me. Also I got a free version of windows 7 through the MSNDAA from University.

Windows 7 pro 32 bit
4 GB RAM
Intel core 2 duo P 7350 @ 2.0 Ghz
8600M GT

Now have also found the file produced and attached it.


My System SpecsSystem Spec
.
30 Sep 2010   #2
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Hello and Welcome !

Seems like the Dumps are pointing to Core Windows Files. Lets do some basic steps. Run a Hardware Diagnostic (Memory and Hard Drive) follow this link for instructions Hardware Diagnostic !! « Captain Debugger

Run SFC /SCANNOW Command - System File Checker

Uninstall AVG and use the Removal Tool AVG - Download tools also remove Spyware Terminator and install Microsoft Security Essentials.

Update your nVidia HDMI audio driver i.e. nvhda32v.sys seems like it's out-dated. Also look for latest update on jmcr.sys i.e. JMB38X Memory Card Reader Driver if you couldn't find it then get some thing that is compatible with Windows 7.

Bugcheck:

Code:
MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 00008885, The subtype of the bugcheck.
Arg2: 83ea2988
Arg3: 83ea0d88
Arg4: 00000501

Debugging Details:
------------------


BUGCHECK_STR:  0x1a_8885

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  svchost.exe

CURRENT_IRQL:  2

LAST_CONTROL_TRANSFER:  from 82a6dece to 82b15d10

STACK_TEXT:  
824c7a7c 82a6dece 0000001a 00008885 83ea2988 nt!KeBugCheckEx+0x1e
824c7ab0 82a60384 00000001 857f5000 824c7bb4 nt!MiRelinkStandbyPage+0x8b
824c7adc 82c553e5 00000100 857f5f90 a68f776c nt!MmSetPfnListPriorities+0x15a
824c7b28 82c589d3 82c6f501 a68f77ac 0000004f nt!PfpPfnPrioRequest+0x61
824c7be8 82cc4986 00e5f3fc 00000014 82c6f501 nt!PfSetSuperfetchInformation+0x176
824c7d20 82a7c44a 0000004f 00000000 00000014 nt!NtSetSystemInformation+0xb00
824c7d20 777364f4 0000004f 00000000 00000014 nt!KiFastCallEntry+0x12a
WARNING: Frame IP not in any known module. Following frames may be wrong.
00e5d2ec 00000000 00000000 00000000 00000000 0x777364f4


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!MiRelinkStandbyPage+8b
82a6dece cc              int     3

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  nt!MiRelinkStandbyPage+8b

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  4c1c3fac

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  0x1a_8885_nt!MiRelinkStandbyPage+8b

BUCKET_ID:  0x1a_8885_nt!MiRelinkStandbyPage+8b

Followup: MachineOwner
Hope this helps,
Captain
My System SpecsSystem Spec
30 Sep 2010   #3
groedius

Window 7 32 bit
 
 

Ok well I will have to run memtest in the morning now however I have carried out the other 3 things you mentioned in your post.

The SFC /SCANNOW returned fine with no errors.

Uninstalled both and used the remover then Installed microsoft security essentials. Will this keep my laptop secure ?

And last the audio drivers are bundled with the graphics card driver. I have now updated the graphics card data and the HD audio driver to the latest available driver. I have also found and installed an windows 7 driver for the JMB38X Memory Card Reader.
My System SpecsSystem Spec
.

01 Oct 2010   #4
groedius

Window 7 32 bit
 
 

Ok so i ran the memtest and it seemed to give me a whole load of red at the bottom and over 22000 errors and it said 0 pass or something went for like 40 minutes and I am not exactly sure what this means. Is my RAM dead or is it something else that is going on ?
My System SpecsSystem Spec
01 Oct 2010   #5
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Hello,

I'm afraid it might be your RAM. But you could try with a different slot to make sure it's RAM or DIMM slot. And if you conformed it's RAM then if it covers warranty send for replacement or get a new one.

- Captain
My System SpecsSystem Spec
01 Oct 2010   #6
Jonathan_King

Windows 7 Professional x64
 
 

You may see Part 3 of this tutorial: RAM - Test with Memtest86+
My System SpecsSystem Spec
02 Oct 2010   #7
groedius

Window 7 32 bit
 
 

Well there is now 2 things. 1 is i am not very experienced with Laptops and have tried to open up one before and it was a complete mission and was very hard I do not think I would be able to open it up and test each ram in each of the slots. Secondly I believe it is sealed so if i open it up it will void my warranty.

So I believe my best bet now then is to get onto HP and see what they say about it.
My System SpecsSystem Spec
02 Oct 2010   #8
CarlTR6

Windows 7 Ultimate 32 bit
 
 

I agree with you. While under warranty, contacting HP is your best choice.
My System SpecsSystem Spec
02 Oct 2010   #9
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Yup... Agreed if it's under warranty please don't open it and spoil the warranty have them replace it for you.

Good Luck,
Captain
My System SpecsSystem Spec
02 Oct 2010   #10
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Quote   Quote: Originally Posted by groedius View Post
Ok well I will have to run memtest in the morning now however I have carried out the other 3 things you mentioned in your post.

The SFC /SCANNOW returned fine with no errors.

Uninstalled both and used the remover then Installed microsoft security essentials. Will this keep my laptop secure ?

And last the audio drivers are bundled with the graphics card driver. I have now updated the graphics card data and the HD audio driver to the latest available driver. I have also found and installed an windows 7 driver for the JMB38X Memory Card Reader.
Yes, most definitely.
My System SpecsSystem Spec
Reply

 BSOD Help




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 10:40.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App