Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: HELP! 2 a day BSOD since upgrading to Windows 7 Pro

03 Oct 2010   #21
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Just uninstall Acronis and do a clean install of the latest version rather than an upgrade over top of the old version. That will take care of any obsolete drivers. Use Revo uinstaller.

Good job on disabling hibernate. I did the same thing.


My System SpecsSystem Spec
.
05 Oct 2010   #22
BDLindberg

Windows 7 Pro x64
 
 

Thanks I did that. I also switched the power options back on and now have had three BSODs in the past two days. The latest one has FAILURE_BUCKET_ID: X64_0xc9_20d_VRF_fileinfo!FIStreamGetInfo+11f.

Say, I do have one question about the irsis.sys file. The only infrared device that I use is a USB device for my polar heart rate monitor and it uses shows up only when it is plugged in. I tried to unintall it and ended up with a major boot error and had to run boot fix.
My System SpecsSystem Spec
05 Oct 2010   #23
Dark Nova Gamer

Windows 7 Ultimate, OS X 10.7, Ubuntu 11.04
 
 

Just to note on the first error "X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE". According to a MS VIP this is generally caused by an outdated BIOS or faulty CPU on some Toshiba and HP computers. Make sure you BIOS is up-to-date.
My System SpecsSystem Spec
.

05 Oct 2010   #24
BDLindberg

Windows 7 Pro x64
 
 

I have the most recent Bios and my system is a custom build PC running an AMD 64 x2 dualcore 6000+ processor that has passed both Prime95 and Intelburn testing over the weekend.
My System SpecsSystem Spec
05 Oct 2010   #25
CarlTR6

Windows 7 Ultimate 32 bit
 
 

BD, upload the dumps to us, please. I know what 0xc9 is; but I would like to see the dump file.

The system is loading the infrared device driver whether or not you are using the actual device. You can open Device Manager, find the infrared device, right click on it, click on Properties, click on the Driver tab, and try updating the driver through Device Manager.
My System SpecsSystem Spec
05 Oct 2010   #26
BDLindberg

Windows 7 Pro x64
 
 

I have tried to update it and it states that the drivers are up to date. Also it says that the device in question is mounted internal. I am not certain of any IR device that would be mounted internally.

Anyway, here are the latest three dump files.
Attachment 102410
My System SpecsSystem Spec
05 Oct 2010   #27
James Colbert

 
 

Quote   Quote: Originally Posted by BDLindberg View Post
RE: Acronis, 2010 is an upgrade from 11 which is an upgrade from 10.
If I might jump in for a comment:

Acronis 2010 has been known to be pretty buggy on many systems. In fact, I installed it (after uninstalling Acronis 2009), ran it for a few days and reverted back to 2009 (got a refund on 2010) because it was so unstable.

My advice is to create a rescue disk and completely uninstall ATI 2010 using Revo or the Acronis clean up utility. Further, I would not reinstall it until you have your issues straightened out. You can always image via the rescue disk (albeit not as convenient). ATI 2010 has had enough issues so as to justify the caution of not reinstalling until you are stable again.

By the way, Acronis will say that 2010 & 11 are the only TI versions that are compatible with Win7, but I have absolutely no issues with 2009 on win7 64. In fact, I have 4 copies, 3 of which I bought on ebay for $12.

Good luck,
James
My System SpecsSystem Spec
05 Oct 2010   #28
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Quote   Quote: Originally Posted by BDLindberg View Post
I have tried to update it and it states that the drivers are up to date. Also it says that the device in question is mounted internal. I am not certain of any IR device that would be mounted internally.

Anyway, here are the latest three dump files.
Attachment 102410
Thanks for the dumps. I will take a look.

The IR system is mounted internally enabling you to use IR devices similar to the USB system being internal allowing you to plug in USB devices.

Quote   Quote: Originally Posted by James Colbert View Post
Quote   Quote: Originally Posted by BDLindberg View Post
RE: Acronis, 2010 is an upgrade from 11 which is an upgrade from 10.
If I might jump in for a comment:

Acronis 2010 has been known to be pretty buggy on many systems. In fact, I installed it (after uninstalling Acronis 2009), ran it for a few days and reverted back to 2009 (got a refund on 2010) because it was so unstable.

My advice is to create a rescue disk and completely uninstall ATI 2010 using Revo or the Acronis clean up utility. Further, I would not reinstall it until you have your issues straightened out. You can always image via the rescue disk (albeit not as convenient). ATI 2010 has had enough issues so as to justify the caution of not reinstalling until you are stable again.

By the way, Acronis will say that 2010 & 11 are the only TI versions that are compatible with Win7, but I have absolutely no issues with 2009 on win7 64. In fact, I have 4 copies, 3 of which I bought on ebay for $12.

Good luck,
James
Good information. Thank you, James.
My System SpecsSystem Spec
05 Oct 2010   #29
BDLindberg

Windows 7 Pro x64
 
 

James, the problems existed prior to my installation of Acronis, but thank you for the advice.
My System SpecsSystem Spec
05 Oct 2010   #30
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Quote:
Error code A0, INTERNAL_POWER_ERROR (2X) -
The power policy manager experienced a fatal error.
Arguments:
Arg1: 000000000000000b, The hibernation file is too small.
Arg2: 00000000bffa8000, Size of the hibernation file.
Arg3: 0000000000000003, HIBERFILE_PROGRESS_MEMORY_RANGES
Arg4: 0000000000e21000, Size of the remaining memory ranges.

Error code C9, DRIVER_VERIFIER_IOMANAGER_VIOLATION - BSOD Index
I am still finding out of date drivers on your system, although I do see some have been updated. I don't believe Win 7 is going to be stable with some of these obsolete drivers.
Quote:
irsir.sys Sat Jan 19 01:36:11 2008 - Serial Infrared Driver, Windows Update. Update this driver.

nvm62x64.sys Fri Oct 17 17:01:06 2008 -
nVidia Ethernet Networking Driver (nForce chipset driver) Drivers - Download NVIDIA Drivers. Update this driver.

nvraid.sys Wed May 20 02:39:40 2009 -
nVidia nForce RAID DriverDrivers - Download NVIDIA Drivers. Update this driver

nvstor64.sys Mon Aug 18 21:53:39 2008 - nVidia Storage Driver (nForce chipset driver) Drivers - Download NVIDIA Drivers

RTKVAC64.SYS Thu Jun 18 15:37:20 2009 - RealTek AC'97 Audio CODECs Driver v.A4.00 for Windows Vista, Windows Vista 64-bit, Realtek. Update this driver.

tifsfilt.sys Wed Aug 29 08:37:29 2007 -
Acronis True Image FS Filter http://www.acronis.com
Completely uninstall Acronis as James suggested above using Revo or the Acronis clean up utility. The Acronis filter driver is the oldest driver on your system. Update the rest of the drivers listed above.

Your latest dump, a Driver Verifier enabled dump, blames fileinfo.sys, which is an MS system driver. In all probability, it is not the cause; but something else interfered with it.

Something is not right with or is interfering with your hibernation file as evidenced by two of the latest dumps and by previous dumps. You posted above that you had disabled Hibernate. How did you do this? Please read this tutorial: Hibernate - Enable or Disable

Uninstall Acronis and update those other drivers and let's see how your system runs.

Run an SFC scan: https://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html. Post back with the results.




My System SpecsSystem Spec
Reply

 HELP! 2 a day BSOD since upgrading to Windows 7 Pro




Thread Tools




Similar help and support threads
Thread Forum
BSOD since upgrading to Windows 7
Hi, I have been getting a BSOD since I upgraded my PC from XP to Windows 7, which was over a month ago. It mostly happens when a lot of programs are running, e.g. iTunes, Windows Update, YouTube etc.. I have tried to read the dump files myself and I think there are several problems with the...
BSOD Help and Support
Windows 7 64-bit BSOD after upgrading RAM
I upgraded my RAM from 2 sticks of 2GB DDR3 1333 MHz to 4 sticks of 2GB 1333 MHz. I purchased the exact same model number of the first 2 sticks I was using, went to BIOS and used the exact same settings for the 2 new sticks of RAM. The system runs but I get BSOD occassionally since then. ...
BSOD Help and Support
Windows 7 64-bit BSOD after upgrading RAM
I upgraded my RAM from 2 sticks of 2GB DDR3 1333 MHz to 4 sticks of 2GB 1333 MHz. I purchased the exact same model number of the first 2 sticks I was using, went to BIOS and used the exact same settings for the 2 new sticks of RAM. The system runs but I get BSOD occassionally since then. I...
BSOD Help and Support
BSOD after upgrading to Windows 7 Ultimate
Hello! About a week ago I updated my computer to Windows 7 Ultimate. Since then, 90% of the time, when I boot up the computer a black screen appears on my screen and no desktop shows up. I can't do anything like get to to a task manager but the computer works fine in safe mode. Strangely, if I...
Windows Updates & Activation
BSOD after upgrading to Windows 7 Ultimate
Hello! About a week ago I updated my computer to Windows 7 Ultimate. Since then, 90% of the time, when I boot up the computer a black screen appears on my screen and no desktop shows up. I can't do anything like get to to a task manager but the computer works fine in safe mode. Strangely, if I...
BSOD Help and Support
BSOD After Windows Upgrading
Is Windows 7 . . . - x64 - windows 7 professional service pack 1 - a full retail version - What is the age of system (hardware)? eight months (8) - What is the age of OS installation (almost one month) I bought it second hand
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:57.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App