Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: another BSOD, please help

04 Oct 2010   #1

windows 7 x64 16385
[Again]another BSOD, please help

My box is win 7 x64, and system is here:

cpu: i7 920
Mainboard: asus p6x58D premium
RAM: G Skill F3-12800CL9-2GBNQ
VGA: Asus Ati 5750
HDD: hitachi sata2 1Tera x 2
And bsod infomation is attached.

Additionally is there any program to show vga's temperature?
My vga has so hot. After booting my computer, I put my fingers on vga card. Then I feel so hot.

My System SpecsSystem Spec
04 Oct 2010   #2
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit

Hello and Welcome !

VGA Card hot is not good maybe that is what causing the BSOD. Because the Dump files are pointing to Hardware. Follow this article Stop 0x124 - what it means and what to try

Update the Following Devices :

Creative AC3 Software Decoder    ROOT\LEGACY_CTAC32K\0000    This device is not present, is not working properly, or does not have all its drivers installed.
Bluetooth 주변 장치    BTHENUM\{0000110E-0000-1000-8000-00805F9B34FB}_VID&0001000F_PID&0000\7&365B85B&0&0026E20E0CCF_C00000000    The drivers for this device are not installed.
Bluetooth 주변 장치    BTHENUM\{00001319-0000-1000-8000-00805F9B34FB}_VID&0001000F_PID&0000\7&365B85B&0&0026E20E0CCF_C00000000    The drivers for this device are not installed.
Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller #2    PCI\VEN_11AB&DEV_4364&SUBSYS_81F81043&REV_12\4&44D0CAE&0&00E5    This device is disabled.

A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80083628f8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.

Debugging Details:

BUGCHECK_STR:  0x124_GenuineIntel





fffff880`03b626f0 fffff800`034cea89 : fffffa80`083628d0 fffffa80`0552e680 00000000`00000017 00000000`00000001 : nt!WheapCreateLiveTriageDump+0x6c
fffff880`03b62c10 fffff800`033b0667 : fffffa80`083628d0 fffff800`034295f8 fffffa80`0552e680 00000003`00000005 : nt!WheapCreateTriageDumpFromPreviousSession+0x49
fffff880`03b62c40 fffff800`03318c45 : fffff800`0348b360 fffffa80`08640a48 fffffa80`08640a40 fffffa80`0552e680 : nt!WheapProcessWorkQueueItem+0x57
fffff880`03b62c80 fffff800`03291961 : fffff880`0104be00 fffff800`03318c20 fffffa80`0552e680 00000000`0000055a : nt!WheapWorkQueueWorkerRoutine+0x25
fffff880`03b62cb0 fffff800`03528c06 : 30af30af`508a508a fffffa80`0552e680 00000000`00000080 fffffa80`0550d040 : nt!ExpWorkerThread+0x111
fffff880`03b62d40 fffff800`03262c26 : fffff880`0396a180 fffffa80`0552e680 fffff880`039750c0 8de08de0`c099c099 : nt!PspSystemThreadStartup+0x5a
fffff880`03b62d80 00000000`00000000 : fffff880`03b63000 fffff880`03b5d000 fffff880`039fe540 00000000`00000000 : nt!KxStartSystemThread+0x16


FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: hardware

IMAGE_NAME:  hardware



BUCKET_ID:  X64_0x124_GenuineIntel_PROCESSOR_MAE_PRV
Hope this helps,
My System SpecsSystem Spec
04 Oct 2010   #3

windows 7 x64 16385

Capt.Jack Sparrow/ I appreciated for your kindness!
My System SpecsSystem Spec

05 Oct 2010   #4

windows 7 x64 16385

After fixing the above-mentioned 4 drivers, I've got BSOD continuously.
My System SpecsSystem Spec
05 Oct 2010   #5

windows 7 x64 16385

Today I have BSOD too.
Please let me know what problem is this.
My System SpecsSystem Spec
05 Oct 2010   #6
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit


Run a Hardware Diagnostic (Memory and Hard Drive) follow this link for instructions Hardware Diagnostic !! « Captain Debugger

Try this free video stress test: FurMark: Graphics Card Stability and Stress Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net

FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit

Try this free stress test: Free Software - GIMPS

Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.

Hope this helps,
My System SpecsSystem Spec
05 Oct 2010   #7

windows 7 x64 16385

Capt.Jack Sparrow/

I appreciated for your kind replies.

I'll try several tests and report here.
My System SpecsSystem Spec

 another BSOD, please help

Thread Tools

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 00:36.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App