Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: x58A-UD3R - included: Dump & System files

14 Oct 2010   #21
hello people

Windows 7 Home Premium 64bit
 
 

Morning....BSOD on cold boot.

I don't know what to do.

Can anyone read the 2 posts before this post and give me any advice?

thanks


My System SpecsSystem Spec
.
14 Oct 2010   #22
hello people

Windows 7 Home Premium 64bit
 
 

Some more info from my local forums:

I have the same board, rev 2.0, and noticed a bit of weirdness with my setup. However I am running the Geil 1600 @ 1333 and everything works fine.

After reading through the manual, the board doesn't actually support 1600 ram:
from page 10:

"Support for DDR3 2200/1333/1060/800 MHz memory modules." Try running the ram at a slower speed and see if:
a) the ram is recognised
b) the OS stops BSD'ing

Also this board is very picky about the RAM it likes. I have a mate who has built 2 of these machine and has had a lot of trouble with the RAM modules.


I thought maybe that's what the new bios's were doing....making the board support 1600....?
My System SpecsSystem Spec
14 Oct 2010   #23
CarlTR6

Windows 7 Ultimate 32 bit
 
 

The fact that you got errors in Memtest tells me something is not right. Run Memtest again from a cold boot, preferably when your computer has been off for a while.
My System SpecsSystem Spec
.

14 Oct 2010   #24
hello people

Windows 7 Home Premium 64bit
 
 

But with what values in bios?

Look at this info....my cpu doesn't even support 1600 ram

GA-X58A-UD3R (rev. 1.0) 1600 MHz support? - Gigabyte - Motherboards-Memory

When I tested my ram at optimised in fc2....I think the ram speed was 1333....I had no errors.

Maybe my ram just is incapable of running stably at 1600

Furthermore....my cpu only supports up to 1066

Intel® Core
My System SpecsSystem Spec
14 Oct 2010   #25
CarlTR6

Windows 7 Ultimate 32 bit
 
 

I am not a hardware expert; but I do know that you have to go with what your motherboard supports unless you are a true hardware expert and do work arounds.
My System SpecsSystem Spec
14 Oct 2010   #26
hello people

Windows 7 Home Premium 64bit
 
 

Well look I'm gonna just try this before I do anymore memory testing.

I'm gonna run the values in bios at optimised so that it hits 1333 or 1066 ram speed. When I have had those bios values I have had no errors in memtest. When the values were different...1600 ram speed...the memtest reported errors.

I think it might be best to set it how it should be set in bios...wait for another cold boot and hope it works.
My System SpecsSystem Spec
14 Oct 2010   #27
CarlTR6

Windows 7 Ultimate 32 bit
 
 

That is the way to go. I hope it works.
My System SpecsSystem Spec
14 Oct 2010   #28
hello people

Windows 7 Home Premium 64bit
 
 

Tell me about it

My System SpecsSystem Spec
14 Oct 2010   #29
CarlTR6

Windows 7 Ultimate 32 bit
 
 

I'll keep my fingers crossed!
My System SpecsSystem Spec
14 Oct 2010   #30
spyknee

W7 Ulti/64, XP Pro/32
 
 

Looking at the cpu-z pic tells me the ram is OC'ed.
The QPI MHz and the NB MHZ are drastically different.
You have 1600 MHz ram, it runs at 1600MHz not 1333 or 1066.
The relationship between the ram multiplier and cpu multiplier is linked. Setting things to auto may not work.
You need to manually adjust cpu until you get the spec'ed MHz and input the spec'ed voltage. Notice the changes in ram MHz whilest you adjust. You also have to get the ram at its required MHz, initial timings and voltage.

Please note my cpu-z. My system is OC'ed a lot. Because of OC my ram timings are on auto. Its 1333MHz ram at 1472MHz.
Put ram at standard in dram selections
disable ciest, green lan
note how I got the QPI and NB MHz similar.

It would also appear that the cpu is underclocked as well? You have a 2.8 GHz and cpu-z states its at 1.5GHz?????????????????????????????????????????

Mine is a 2.66GHz pushed to 3.8GHz compare the relationships.
My System SpecsSystem Spec
Reply

 x58A-UD3R - included: Dump & System files




Thread Tools




Similar help and support threads
Thread Forum
BSOD - Dump files included error:
Hey Guys, I have been experiencing a really werid issue I cannot figure out. I was hoping you could give me a hand in identifying the culprit. Its hard to get the issue fixed because it happens at random intervals it can happen twice a week then not happen for a month. -When the issue occurs...
BSOD Help and Support
BSOD 0x0000000f4 dump files included
Been getting seemingly random BSOD only thing i've changed recently was my logitech drivers for my mic, changed those back to the originals and still crashing. Ran diags on hard drive, motherboard and ram and all seem to be working fine so im back to thinking its driver related, don't know an...
BSOD Help and Support
BSOD while playing BF3, Dump files etc included
Hey there Guys and Girls, Recently i built my own pc from ground up to my own likings and word of mouth, reviews of certain products etc. My system is no longer then about 3 weeks old now and i have not installed one 2nd part either, all brand new so it frustrates me to get such a bad error...
BSOD Help and Support
which SATA ports for GA-X58A-UD3R rev.2
I'm a newbie thru and thru, in need of advice. I have a GA-X58A-UD3R Rev.2 w/i7/12gb RAM and the following drives- 120gb Vertex2 SSD (w/w7-64bit) 2-600gb DigiRaptors as RAID1 SATA DVD I originally plugged the SSD and DVD into GSATA2 and the RAID1 drives to GSATA3. I had BSOD once a week til I...
Hardware & Devices
Random lockups- dump files included
I am having random lockups. I would appreciate if someone could look at the attached dump files and let me know what is going on. Thanks Win 7 64 bit full retail version 4 month old custom built
BSOD Help and Support
Repeated BSODs, Dump files included
Hi everyone, My PC has been getting a lot of BSOD's lately, and sometimes just plain crashes on startup. I've reformatted several times, and the problem keeps coming back. I thought it might be faulty RAM, so I ran Memtest, which showed that one of my sticks was faulty (I had 3 x 2GB DDR3 RAM)....
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:05.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App