Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: x58A-UD3R - included: Dump & System files

17 Oct 2010   #61
hello people

Windows 7 Home Premium 64bit
 
 

Ladies and gentlemen...boys and girls...I would like to announce...

SUCCESS!!!!!!!!!!!!!!!!!!

Ok...I'm just joking about my excitement levels....but I can report as follows:

- My first cold boot total success in over a week.

How did it happen?

- I took out the old ADATA ram (which didn't feature XMP)
- I installed new 1600 Corsair Ram...which DOES support XMP
- I set XMP in BIOS to profile 1...

done like a dinner

I am not considering myself out of the woods yet...I will be closely monitoring what goes on. But this is the best news I've had all week. My PC issues have been sucking my will to live!

All measurements are reading at spec. Everything appears normal.

I'd like to thank everyone for their help...and well...what can say...ram with no XMP feature is dangerous to configure for x58/ i7 rigs.

I'll keep you all posted.


My System SpecsSystem Spec
.
17 Oct 2010   #62
spyknee

W7 Ulti/64, XP Pro/32
 
 

Good to hear.
Altho, I have to mention that I do not use XMP ram. But your bios are slightly different than mine, however.

Possibly just bad ram sticks or stick, only takes 1 to sour the works.

Please remember a bad bios set up can trash the hardware!

Have a sunny day.
My System SpecsSystem Spec
17 Oct 2010   #63
hello people

Windows 7 Home Premium 64bit
 
 

Thanks spyknee...things are looking up
My System SpecsSystem Spec
.

17 Oct 2010   #64
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Quote   Quote: Originally Posted by hello people View Post
Ladies and gentlemen...boys and girls...I would like to announce...

SUCCESS!!!!!!!!!!!!!!!!!!

Ok...I'm just joking about my excitement levels....but I can report as follows:

- My first cold boot total success in over a week.

How did it happen?

- I took out the old ADATA ram (which didn't feature XMP)
- I installed new 1600 Corsair Ram...which DOES support XMP
- I set XMP in BIOS to profile 1...

done like a dinner

I am not considering myself out of the woods yet...I will be closely monitoring what goes on. But this is the best news I've had all week. My PC issues have been sucking my will to live!

All measurements are reading at spec. Everything appears normal.

I'd like to thank everyone for their help...and well...what can say...ram with no XMP feature is dangerous to configure for x58/ i7 rigs.

I'll keep you all posted.
That is, indeed, great news! I share your excitement. Thanks for letting us know.
My System SpecsSystem Spec
17 Oct 2010   #65
hello people

Windows 7 Home Premium 64bit
 
 

No worries....thanks to your forum....I learned a lot about bios!

This morning was my first successful morning cold boot in about 9 days

My System SpecsSystem Spec
Reply

 x58A-UD3R - included: Dump & System files




Thread Tools




Similar help and support threads
Thread Forum
BSOD - Dump files included error:
Hey Guys, I have been experiencing a really werid issue I cannot figure out. I was hoping you could give me a hand in identifying the culprit. Its hard to get the issue fixed because it happens at random intervals it can happen twice a week then not happen for a month. -When the issue occurs...
BSOD Help and Support
BSOD 0x0000000f4 dump files included
Been getting seemingly random BSOD only thing i've changed recently was my logitech drivers for my mic, changed those back to the originals and still crashing. Ran diags on hard drive, motherboard and ram and all seem to be working fine so im back to thinking its driver related, don't know an...
BSOD Help and Support
BSOD while playing BF3, Dump files etc included
Hey there Guys and Girls, Recently i built my own pc from ground up to my own likings and word of mouth, reviews of certain products etc. My system is no longer then about 3 weeks old now and i have not installed one 2nd part either, all brand new so it frustrates me to get such a bad error...
BSOD Help and Support
which SATA ports for GA-X58A-UD3R rev.2
I'm a newbie thru and thru, in need of advice. I have a GA-X58A-UD3R Rev.2 w/i7/12gb RAM and the following drives- 120gb Vertex2 SSD (w/w7-64bit) 2-600gb DigiRaptors as RAID1 SATA DVD I originally plugged the SSD and DVD into GSATA2 and the RAID1 drives to GSATA3. I had BSOD once a week til I...
Hardware & Devices
Random lockups- dump files included
I am having random lockups. I would appreciate if someone could look at the attached dump files and let me know what is going on. Thanks Win 7 64 bit full retail version 4 month old custom built
BSOD Help and Support
Repeated BSODs, Dump files included
Hi everyone, My PC has been getting a lot of BSOD's lately, and sometimes just plain crashes on startup. I've reformatted several times, and the problem keeps coming back. I thought it might be faulty RAM, so I ran Memtest, which showed that one of my sticks was faulty (I had 3 x 2GB DDR3 RAM)....
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:46.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App