Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD - page fault in nonpaged area - pls pls help

16 Oct 2010   #11
Snakeyeskm

Win 7 64 bit professional
 
 

"page fault in non-paged area" errors need patience to solve. Try the following steps: –
Reseat all your RAM sticks as well as your video cards.
Run memtest to thoroughly check your RAM sticks. (RAM problems are high on the list of hardware issues that cause your error).
Try different combinations of two or four sticks if errors occur during testing. Make sure your DRAM voltage is set to manufacturer specs.

If the RAM checks out, uninstall the last software/driver installed prior to the first occurrence of the error.

Do all testing after disconnecting all external peripherals (external hard drives and printers etc.)

"0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
(Click to consult the online MSDN article.)
Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card)"

Best of luck and be patient.


My System SpecsSystem Spec
.
16 Oct 2010   #12
chainsaw

Windows 7 Ultimate 64
 
 

thanks - I have done memtest on this ram for 7 passes without a single error, could it get errors in different slots?.

The last thing I did was to connect my sata 3 C300 to the sata 3 marvel onboard controller - should I disconnect these and just leave my boot disk in ?

I dont have loads of time as I work 8-10 hours a day and I am mindfull of my 28 day return to vendor warranty!!

Is that info from checking the minidump file ? as the 2nd pagefault in non paged area also had win32k.sys on it

Again all advice is really welcome

thx

PS I am running 2x SSD in this computer (NOT Raid) - can these cause it?
My System SpecsSystem Spec
17 Oct 2010   #13
chainsaw

Windows 7 Ultimate 64
 
 

can anyone look at the minidump files for us - will it show specifically what is failing ?

I am pulling my hair out
My System SpecsSystem Spec
.

17 Oct 2010   #14
Snakeyeskm

Win 7 64 bit professional
 
 

Quote   Quote: Originally Posted by chainsaw View Post
thanks - I have done memtest on this ram for 7 passes without a single error, could it get errors in different slots?.

The last thing I did was to connect my sata 3 C300 to the sata 3 marvel onboard controller - should I disconnect these and just leave my boot disk in ?

I dont have loads of time as I work 8-10 hours a day and I am mindfull of my 28 day return to vendor warranty!!

Is that info from checking the minidump file ? as the 2nd pagefault in non paged area also had win32k.sys on it

Again all advice is really welcome

thx

PS I am running 2x SSD in this computer (NOT Raid) - can these cause it?
I would run memtest overnight just to be sure. Also, try LinX for about 30 runs (it's a free download). I would definitely try disconnecting the C 300 if memory can be eliminated as an issue.
Your SSD drives should not be causing this issue. But make sure that their cables are properly connected.

Many of the experts here are great at reading dump files and hopefully they will chime in. You clearly have a very nice hardware set up and hopefully it should be up and running well soon.
My System SpecsSystem Spec
17 Oct 2010   #15
chainsaw

Windows 7 Ultimate 64
 
 

Thx for your help :)

I have a feeling it is either the CPU or memory but cant get it to fault atm

I have fully stress tested the GPU's and I cant get a BSOD.

I will look into LinX and will update.
My System SpecsSystem Spec
17 Oct 2010   #16
Jonathan_King

Windows 7 Professional x64
 
 

Chrome.exe running in 2 of the 3 dumps.

Install these Realtek NIC drivers: Realtek

...Summary of the Dumps:
Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sat Oct 16 17:51:46.347 2010 (UTC - 4:00)
System Uptime: 0 days 0:16:26.346
BugCheck 50, {fffff940c242fe28, 0, fffff9600006bcb6, 5}
Probably caused by : win32k.sys ( win32k!RFONTOBJ::bGetGlyphMetricsPlus+216 )
BUGCHECK_STR:  0x50
PROCESS_NAME:  chrome.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sat Oct 16 17:33:58.601 2010 (UTC - 4:00)
System Uptime: 0 days 5:19:15.600
BugCheck 50, {fffffa80c079bc1b, 0, fffff8000328e5ff, 5}
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+4df )
BUGCHECK_STR:  0x50
PROCESS_NAME:  chrome.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Fri Oct 15 04:44:35.781 2010 (UTC - 4:00)
System Uptime: 0 days 0:05:20.780
BugCheck 1A, {41201, fffff6800007d260, 7c1000410a298867, fffffa80092e4220}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+13bf2 )
BUGCHECK_STR:  0x1a_41201
PROCESS_NAME:  svchost.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
My System SpecsSystem Spec
19 Oct 2010   #17
chainsaw

Windows 7 Ultimate 64
 
 

thx - is there a know problem with chrome? and if it was chome why would it still fault when it was not running?

regards
My System SpecsSystem Spec
19 Oct 2010   #18
Jonathan_King

Windows 7 Professional x64
 
 

No bugs in Chrome known to cause BSODs, at least as far as I have seen.

The dumps are not actually blaming Chrome for the crash, merely reporting that it was "in front" at the time.

The most likely cause is that something else, like NIC drivers, is causing the problem, crashing when Chrome tries to use them.

Follow Jonathan's advice to install those Realtek NIC drivers: https://www.sevenforums.com/crashes-d...ml#post1019919
My System SpecsSystem Spec
20 Oct 2010   #19
chainsaw

Windows 7 Ultimate 64
 
 

Ok - had computer in bits and tested from where I bought (SCAN) after cold bott and FULL testing 0 errors so it must be a software problem.

When I get it back gonna doa clean install and update thos NIC drivers. Would a NIC driver really cause page fault errors ?

thx will keep you updated

PS are those drivers for the network adapter?
My System SpecsSystem Spec
20 Oct 2010   #20
Jonathan_King

Windows 7 Professional x64
 
 

I have found that just about any cause can bring just about any error. So yes, NIC drivers can cause page fault errors.

Yes, the Realtek drivers are for the network adapter.
My System SpecsSystem Spec
Reply

 BSOD - page fault in nonpaged area - pls pls help




Thread Tools




Similar help and support threads
Thread Forum
BSOD Page fault in nonpaged area
Hello, I replaced my old HDD for an SSD. After turning on AHCI-mode in the BIOS and formatting the new SSD, I installed Windows 7 Ultimate x64 SP1. Now that Windows installation is complete, I installed all the drivers for my hardware. Since then, after starting Windows a BSOD appears with the...
BSOD Help and Support
BSOD: page fault in nonpaged area
Hello, I bought a new computera last week and it has been throwing BSODs at random times, around 2-3 times a week, with no apparent reason. The error I get is PAGE_FAULT_IN_NONPAGED_AREA, win32k.sys. I'm uploading the diagnostics I got from the SD diagnostic tool. Please, I'm desperate, I...
BSOD Help and Support
BSOD - Page fault in nonpaged area
Just done a clean install of windows to solve an issue I had with graphics drivers crashing then recovering this doesnt seem to have helped as screen has frozen and NOT recovered twice now and just had this BSOD:Page fault in nonpaged area. Wasnt fast enough to catch codes on screen but SF...
BSOD Help and Support
Page Fault in Nonpaged Area BSOD (Among a few others)
Hello, for the past several months now my computer has been getting many BSOD messages along the lines "Page fault in nonpaged area" and a few others who's descriptions escape me at the moment. It has gotten to the point where I can barely get anything done anymore because of the BSODs or the...
BSOD Help and Support
BSOD Page Fault in Nonpaged Area
Hi All, First post here so hope I have done all correctly! Had hoped to catch up on my workload today but windows decided otherwise! Have had multiple BSOD. Mainly Page Fault in Nonpaged Area but also others such as Apc Index Mistmatch. I am getting BSOD on every boot. I literally cannot use...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 18:53.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App