Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD with product 768_1

26 Oct 2010   #21
Hisi

Windows7 Home Premium 64 Bit
 
 

Yes, I did that.
But in Device Manger it shows 2 different Realtek's. One of them got updated for sure (upper one, saw name being changed), the other one not sure about. Im not sure if that should be updated as well. The driver says it's from 2008 (seems old, but maybe it's the right one).

=edit=
Think that doesnt matter after all. If I look into the Driver Details, the Realtek RTL8169/8110 is using the Rt64win7.sys-file. Which is also used by the other one. And the file version is from 2010, so I suppose that is correct.


My System SpecsSystem Spec
.
26 Oct 2010   #22
cybercore

Windows 7 x64
 
 



Quote:
If I look into the Driver Details, the Realtek RTL8169/8110 is using the Rt64win7.sys-file. Which is also used by the other one. And the file version is from 2010, so I suppose that is correct.

Correct indeed if so.
My System SpecsSystem Spec
26 Oct 2010   #23
Hisi

Windows7 Home Premium 64 Bit
 
 

Ok. Moving back to my normal videocard. Let's pray it's fixed.
My System SpecsSystem Spec
.

26 Oct 2010   #24
cybercore

Windows 7 x64
 
 

Get the latest video driver.
My System SpecsSystem Spec
27 Oct 2010   #25
Hisi

Windows7 Home Premium 64 Bit
 
 

Yep, got the latest, saw a new one came out.

Too bad my pc did crash this morning (no BSOD, just crashed) So will check RAM again....though my feeling goes to the motherboard..

=edit=
Hmm, at the moment pc seems fine again (took 1 RAM-module out) Not sure if it's broken or wasnt placed correct (fell out when I unlocked 1 side), but think it's broken since I changed the modules from the black to the blue slots.
Yesterday I did notice that while watching on youtube, my screen flickered....after taking that module out, it doesnt happen anymore.

But lets wait and see, not gonna cheer to early anymore, seems to give bad luck, haha.
My System SpecsSystem Spec
31 Oct 2010   #26
Hisi

Windows7 Home Premium 64 Bit
 
 

Problem still isnt solved. But seems my pc doesnt like it when I have more than one memory-modules. With one I have no problems at all, but as soon as I put in a second one, the pc starts crashing after a little while.
I have been checking the modules each separately on memtest, and no errors had been found.
Also I wanted to upgrade my memory anyway, so bought new another kit this weekend and also with those in the pc (and old ones left out) the pc seems to crash (with only 1 of those new modules in the pc, no crashes happen).

Does this mean the motherboard has a problem...or could the problem also be at something else? Like the powersupply?
My System SpecsSystem Spec
02 Nov 2010   #27
cybercore

Windows 7 x64
 
 

Quite likely your memory sticks are mismatching, are they the same brand, preferably if they are from the same batch?
My System SpecsSystem Spec
02 Nov 2010   #28
Hisi

Windows7 Home Premium 64 Bit
 
 

They certainly can not be mismatching, since I bought both (the ones I bought together with my pc, and the ones I bought last week) of them in a kit of 2. And if they would be mismatching, than I would have had the problem already at the moment I would have gotten the pc.
My System SpecsSystem Spec
03 Nov 2010   #29
cybercore

Windows 7 x64
 
 

Quote:
Problem still isnt solved. But seems my pc doesnt like it when I have more than one memory-modules. With one I have no problems at all, but as soon as I put in a second one, the pc starts crashing after a little while.

RAM is the problem then. And that's why it is often recommended to test modules separately, and also in different slots in case there's a motherboard problem.



Quote:
They certainly can not be mismatching, since I bought both (the ones I bought together with my pc, and the ones I bought last week) of them in a kit of 2.
I may be misreading you, but if you're using the memory from 2 different kits this is likely the problem.


Quote:
my pc doesnt like it when I have more than one memory-modules.
Take this good module and test it in different slots.
My System SpecsSystem Spec
03 Nov 2010   #30
Hisi

Windows7 Home Premium 64 Bit
 
 

Quote   Quote: Originally Posted by cybercore View Post
Quote:
Problem still isnt solved. But seems my pc doesnt like it when I have more than one memory-modules. With one I have no problems at all, but as soon as I put in a second one, the pc starts crashing after a little while.
RAM is the problem then. And that's why it is often recommended to test modules separately, and also in different slots in case there's a motherboard problem.
I tested my RAM in different slots all seperatly, and there were no errors.

Quote:
Quote:
They certainly can not be mismatching, since I bought both (the ones I bought together with my pc, and the ones I bought last week) of them in a kit of 2.
I may be misreading you, but if you're using the memory from 2 different kits this is likely the problem.
I have never used the 2 kits at the same time. I have either used my old kit modules or the new kit modules.
Also they are exactly the same: Kingston - DDR3 - PC 10600 - 1333MHz - cas 9 - non-ECC - 4GB - Kit of 2

Quote:
Quote:
my pc doesnt like it when I have more than one memory-modules.
Take this good module and test it in different slots.
Did that, and than there were no errors. As soon as a entered a 2nd module in a other slot, there was a problem.
My System SpecsSystem Spec
Reply

 BSOD with product 768_1




Thread Tools




Similar help and support threads
Thread Forum
Intermitent BSOD Product 768_1
Hi guys, I have a Lenovo G570 which is giving an intermittent BSOD. Sometimes iI can go the whole day without a BSOD and some other times the thing crashes 3-5 times a day. Here are the details: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 ...
BSOD Help and Support
BSOD BCC code 116 product 768_1 Win 7 64 bit.
Recently I've had this problem and when I get into Windows it shows me the error.I was wondering how do I fix it.Thank you Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional information about the problem: BCCode: ...
BSOD Help and Support
BSOD using 3ds max 2012 BCCode a Product 768_1
This is my first post, forgive me if I write anything redundant. This is the third BSOD I've had while running 3ds max 2012, in a period of four months. I had initially thought that a new feature of the software ( namely the Nitrous viewport driver) was causing the issue, but my computer...
BSOD Help and Support
BSOD I suspect product 768_1
I just recently reformatted my hard drive and did a clean install of Windows 7 home edition 64bit. I can't nail this down but I think it's a USB driver issue. It reboots almost every hour only when the PC is unattended. The message logs all refer to product 768_1 whatever that is. Example...
BSOD Help and Support
BSOD product 768_1
Got this laptop this year, late August and already having issues. Ran Memtest86 - no memory errors. Blue screen shows either "system_services_exception" or "irql_is_equal_or_less" problems. Please help :shock:
BSOD Help and Support
Memory Crash Dump (BSOD, Product 768_1)
I am at a loss as to how to resolve this issue. I have run memory checks, even re-seated the RAM cards, but to no avail. When trying to shut down the computer, I encounter a BSOD with a memory crash dump that soon goes to a login screen. I am unable to shutdown, except via Safe Mode. I have...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:58.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App