Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Crashing Without A Blue Screen

23 Oct 2010   #1
Morc

Windows 7 Ultimate x64
 
 
Crashing Without A Blue Screen

Windows 7 Ultimate Edition 64 bit

Hello, I've been crashing... monitor turns off with computer still on, but nothing works.
I have to force restart/shutdown with the buttons. I've cleared my drivers and used driver sweeper to help clean. After i restarted computer i applied updated drivers from the Nvidia website, and problem still occurs.

EDIT* I did the FurMark Stress Test for the GPU, not a over heating issue. And got a new 550 psu. I don't think it's a power issue cus this is the reason i got a new one...


My System SpecsSystem Spec
.
23 Oct 2010   #2
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

The problem seems to be a driver. Replace and you should be OK
Productname: NVIDIA Compatible Windows Vista Kernel Mode Driver, Version 175.30

Description: NVIDIA Compatible Windows Vista Kernel Mode Driver, Version 175.30

Company: NVIDIA Corporation
My System SpecsSystem Spec
23 Oct 2010   #3
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Morc View Post
Windows 7 Ultimate Edition 64 bit

Hello, I've been crashing... monitor turns off with computer still on, but nothing works.
I have to force restart/shutdown with the buttons. I've cleared my drivers and used driver sweeper to help clean. After i restarted computer i applied updated drivers from the Nvidia website, and problem still occurs.

EDIT* I did the FurMark Stress Test for the GPU, not a over heating issue. And got a new 550 psu. I don't think it's a power issue cus this is the reason i got a new one...
Hate to say it but these two still point to your video driver.

I would use the below to remove and re-install just the driver and none of the extra things.

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper

When it is removed then download and install the fresh copy.


Ken J

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\101510-17456-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (3 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c4f000 PsLoadedModuleList = 0xfffff800`02e8ce50
Debug session time: Sat Oct 16 01:08:44.371 2010 (GMT-4)
System Uptime: 0 days 3:27:51.792
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
......................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff88003df0000, 1, fffff88011e981ce, 0}

Unable to load image nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys

Could not read faulting driver name
Probably caused by : nvlddmkm.sys ( nvlddmkm+751ce )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff88003df0000, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff88011e981ce, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002ef70e0
 fffff88003df0000 

FAULTING_IP: 
nvlddmkm+751ce
fffff880`11e981ce 42891488        mov     dword ptr [rax+r9*4],edx

MM_INTERNAL_CODE:  0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x50

PROCESS_NAME:  csrss.exe

CURRENT_IRQL:  0

TRAP_FRAME:  fffff88003981050 -- (.trap 0xfffff88003981050)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff88003dea000 rbx=0000000000000000 rcx=fffffa80059d9030
rdx=0000000000040084 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88011e981ce rsp=fffff880039811e8 rbp=0000000000000000
 r8=0000000000000000  r9=0000000000001800 r10=0000000000000000
r11=fffffa8004fe9000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
nvlddmkm+0x751ce:
fffff880`11e981ce 42891488        mov     dword ptr [rax+r9*4],edx ds:b498:fffff880`03df0000=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002d3ff14 to fffff80002cbf740

STACK_TEXT:  
fffff880`03980ee8 fffff800`02d3ff14 : 00000000`00000050 fffff880`03df0000 00000000`00000001 fffff880`03981050 : nt!KeBugCheckEx
fffff880`03980ef0 fffff800`02cbd82e : 00000000`00000001 fffffa80`059d9000 00000000`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x42837
fffff880`03981050 fffff880`11e981ce : fffff880`11e9f536 00000000`00000000 fffff880`0474c000 fffff880`009e9180 : nt!KiPageFault+0x16e
fffff880`039811e8 fffff880`11e9f536 : 00000000`00000000 fffff880`0474c000 fffff880`009e9180 00000000`00000000 : nvlddmkm+0x751ce
fffff880`039811f0 00000000`00000000 : fffff880`0474c000 fffff880`009e9180 00000000`00000000 fffff880`0474c000 : nvlddmkm+0x7c536


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nvlddmkm+751ce
fffff880`11e981ce 42891488        mov     dword ptr [rax+r9*4],edx

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  nvlddmkm+751ce

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nvlddmkm

IMAGE_NAME:  nvlddmkm.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4c37918e

FAILURE_BUCKET_ID:  X64_0x50_nvlddmkm+751ce

BUCKET_ID:  X64_0x50_nvlddmkm+751ce

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff88003df0000, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff88011e981ce, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 0000000000000000, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

WRITE_ADDRESS:  fffff88003df0000 

FAULTING_IP: 
nvlddmkm+751ce
fffff880`11e981ce 42891488        mov     dword ptr [rax+r9*4],edx

MM_INTERNAL_CODE:  0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x50

PROCESS_NAME:  csrss.exe

CURRENT_IRQL:  0

TRAP_FRAME:  fffff88003981050 -- (.trap 0xfffff88003981050)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff88003dea000 rbx=0000000000000000 rcx=fffffa80059d9030
rdx=0000000000040084 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88011e981ce rsp=fffff880039811e8 rbp=0000000000000000
 r8=0000000000000000  r9=0000000000001800 r10=0000000000000000
r11=fffffa8004fe9000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
nvlddmkm+0x751ce:
fffff880`11e981ce 42891488        mov     dword ptr [rax+r9*4],edx ds:b498:fffff880`03df0000=????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002d3ff14 to fffff80002cbf740

STACK_TEXT:  
fffff880`03980ee8 fffff800`02d3ff14 : 00000000`00000050 fffff880`03df0000 00000000`00000001 fffff880`03981050 : nt!KeBugCheckEx
fffff880`03980ef0 fffff800`02cbd82e : 00000000`00000001 fffffa80`059d9000 00000000`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x42837
fffff880`03981050 fffff880`11e981ce : fffff880`11e9f536 00000000`00000000 fffff880`0474c000 fffff880`009e9180 : nt!KiPageFault+0x16e
fffff880`039811e8 fffff880`11e9f536 : 00000000`00000000 fffff880`0474c000 fffff880`009e9180 00000000`00000000 : nvlddmkm+0x751ce
fffff880`039811f0 00000000`00000000 : fffff880`0474c000 fffff880`009e9180 00000000`00000000 fffff880`0474c000 : nvlddmkm+0x7c536


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nvlddmkm+751ce
fffff880`11e981ce 42891488        mov     dword ptr [rax+r9*4],edx

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  nvlddmkm+751ce

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nvlddmkm

IMAGE_NAME:  nvlddmkm.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4c37918e

FAILURE_BUCKET_ID:  X64_0x50_nvlddmkm+751ce

BUCKET_ID:  X64_0x50_nvlddmkm+751ce

Followup: MachineOwner
---------
My System SpecsSystem Spec
.

28 Oct 2010   #4
Morc

Windows 7 Ultimate x64
 
 

I've done everything recommended, nothing worked. I reformatted computer today, this time with Windows 7 Ult. Edition 32bit, instead of 64. I installed Microsoft Security essentials, Spybot S&D, Ad-Aware, Ventrilo, and my game, comp still crashes when i play the game, monitor goes off and computer freezes, have to force shut it down.

Since the reformat, this is a new BSoD Info, maybe someone can find something new.

PLS HELP, I'M SO FRUSTRATED, HAVEN'T HAD A WORKING COMP FOR MONTHS, EVEN AFTER UPGRADE.
My System SpecsSystem Spec
29 Oct 2010   #5
Morc

Windows 7 Ultimate x64
 
 

bump
My System SpecsSystem Spec
29 Oct 2010   #6
Shadowjk

Windows 7 Professional x64 SP1 ; Windows Server 2012 R2 Standard
 
 

Just For your Advice Thread "Bumping" Is Forbidden on this Forum

See https://www.sevenforums.com/general-d...ease-read.html For More Information

This is for Future References you will be let of for this Occasion

Many Thanks,
Josh
My System SpecsSystem Spec
Reply

 Crashing Without A Blue Screen




Thread Tools




Similar help and support threads
Thread Forum
PC keeps crashing and getting Blue Screen
It doesn't matter what I'm doing, my pc could be idle and yet it crashes at least 3 - 4 times a day and some days not once. Someone please help me. Ever since I built this pc I've been having this problem. I've attached my Windows_NT6_BSOD_jcgriff2 and the perfmon.html file. I'm running an OEM...
BSOD Help and Support
Crashing with Blue Screen Error
I have Dell 1558 core I7 740QM processor, with ATI mobility Radeon HD 5470 graphic card and having Window 7 64bit home premium installed in it. Laptop crashes a lot giving Blue Screen Error: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.768.3 ...
BSOD Help and Support
Blue Screen 2057 Crashing
Hi there, I'm new to these forums but it seems to be the place to get some useful answers to Windows 7 problems. And I have a pretty big one at the moment! I have experienced the Blue Screen crash on loading up my computer in the last couple of days - it is an intermittent problem too so I've...
BSOD Help and Support
xp mode keeps crashing in blue screen
Hallo together, I installed the XP Mode on my Windows 7 Professional machine. First, everything went fine; the programs I needed the xp mode for ran w/o any problems. Since one start of ie (or better Win update) the machine (not only the xp mode) keeps on crashing in the same bluescreen. ...
BSOD Help and Support
Windows 7 keeps crashing, Blue screen ?
My pc has been crashing for the last week or so, i get the blue screen of death followed by a restart. Today i got the blue screen but no restart so i managed to get the codes from the blue screen Stop 0x0000008E(0xc0000005,0x82FEC837,0xA68377EC,0x00000000) Does anyone have any thoughts. I...
BSOD Help and Support
Crashing, Blue Screen
Hey! My computer has been all weird the last week or so. It started with some random crashes or freezing sometimes. But now everytime i start the computer i get a blue screen/or it frezes after just a couple of minutes of using it. Also, sometime when i start the computer, it says that i dont...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:55.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App