Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSOD?? or Computer issue???

03 Jun 2009   #1

BSOD?? or Computer issue???

So i bought a new computer like 6 months ago;

Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7100) (7100.winmain_win7rc.090421-1700)
Language: English (Regional Setting: English)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: EX58-UD5
BIOS: Award Modular BIOS v6.00PG
Processor: Intel(R) Core(TM) i7 CPU 965 @ 3.20GHz (8 CPUs), ~3.3GHz
Memory: 6142MB RAM
Available OS Memory: 6142MB RAM
Page File: 1311MB used, 10969MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7100.0000 32bit Unicode
Card name: ATI Radeon HD 4870 X2
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor (0x9441)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9441&SUBSYS_25421002&REV_00
Display Memory: 3827 MB
Dedicated Memory: 1015 MB
Shared Memory: 2811 MB
Current Mode: 1680 x 1050 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: L226W
Monitor Id: GSM566B
Native Mode: 1680 x 1050(p) (59.883Hz)
Output Type: DVI
Driver Name: atiumdag,atidxx32,atidxx64.dll,atiumdva,atiumd64.dll,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.14.0010.0655 (English)
Driver Version: 8.600.0.0
DDI Version: 10.1
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 3/16/2009 14:11:16, 3837440 bytes

From dxdiag

anyways i had the first problem when my screen went all messed up then died. turned it off then on, the board just started going beep beep beep beep beep really fast, w/e take it in, didnt have time to worry about it.

They told me it was poorly built.... which it wasn't they said the problem was heat because i didn't tie strap my power cables. okie.... bs... w/e they charge me 60 bucks rebuilt it and it worked for an hour it bsod again and ****ed up, i unplugged it waited a few min turned it on all the fans are working there is brand new heating paste on my cpu,

got it up and running luckly windows came up with this

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7100.
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8007148698
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7100
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Users\*** *****\AppData\Local\Temp\WER-25546-0.sysdata.xml

Read our privacy statement online:

If the online privacy statement is not available, please read our privacy statement offline:

any idea would be great....

My System SpecsSystem Spec
03 Jun 2009   #2


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7100.
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 0000000000000538
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF8800149C75C
OS Version: 6_1_7100
Service Pack: 0_0
Product: 256_1

another one ...

My System SpecsSystem Spec
03 Jun 2009   #3


So i tried updating my BIOS, so far so good... not getting my hopes up... im thinking if i still have problems either ram or mobo? any other idea's please post i could use idea's...
My System SpecsSystem Spec

03 Jun 2009   #4
Microsoft MVP

Windows 7 Ultimate 32bit SP1

1. Did this new computer come with Vista?
2. Which version and did you download SP1 before you downloaded Win7?
3. Did you do a "clean install" of Win7 or just an upgrade?
4. Are you dual booting?

Just a few questions for you to answer before anyone can help you :)
My System SpecsSystem Spec
03 Jun 2009   #5


clean install, dual bios not dual boot, and its a signal partition was the samsung hd with that firmware issue which i updated along time ago
My System SpecsSystem Spec
03 Jun 2009   #6

Windows 7 Build 7600|16384- 64bit

Dual Bios? Maybe one is not updated while the other one is?
My System SpecsSystem Spec
03 Jun 2009   #7


To be honest i have no idea, its a feature of this space age board lol?
i think it has to do if 1 fails you can load another?
My System SpecsSystem Spec
03 Jun 2009   #8


DualBIOS™ - Patented Dual Hardware BIOS Protection
DualBIOS™ is a GIGABYTE patented technology that automatically recovers BIOS data when main BIOS has crashed or failed. Featuring 2 physical BIOS ROMs integrated onboard, GIGABYTE DualBIOS™ allows quick and seamless recovery from BIOS damage or failure due to viruses or improper BIOS updating.
My System SpecsSystem Spec
03 Jun 2009   #9

Windows 7 Build 7600|16384- 64bit

Well Dual Bios allows one bios to be the backup of the other bios in case of a failure. I am guessing if you update the bios, you need to update both of them, or else one may be using the old bios, which is causing problems? Also, when was your board made?

*Posted right after you posted the Dual Bios Info^^^*
My System SpecsSystem Spec
03 Jun 2009   #10


Lol updated both with the F7 the most updated one?
My System SpecsSystem Spec

 BSOD?? or Computer issue???

Thread Tools

Similar help and support threads
Thread Forum
Unknown BSOD issue with Intel Nuc computer
Hello, I am having frequent BSOD issues with my Intel Nuc. What started out as a once in a while thing is now a common problem. I suspect it may be the memory (2x2GB), but am not sure. If anyone is able to take a look at my logs and help identify the problem/offer a solution, I would really...
BSOD Help and Support
Another BSOD when computer sleeps issue
Hi experts, I'm stumped. My Samsung R580 is a couple of years old and has, until now, worked very well. About a month ago, it started crashing/restarting when I'd wake it from sleep mode. Or it would be restarted when I did; it's possible it crashed when going into sleep mode. I think I had...
BSOD Help and Support
First Time BSOD; Computer Restarts Issue
This is my first time on these forums. I have just recently gotten this BSOD issue over the past 2 days. If I leave my computer idle for a bit, I notice a blue screen that quickly pops up (says something like DRIVER_STATE_FAILURE at the top) and then it restarts the computer. Quick overview of...
BSOD Help and Support
0xF4 BSOD issue on new computer
Hey guys, About a month ago, I built a mostly new rig with the following specs: AsRock Z68 Extreme4 Intel i7 2600K 2x4GB Kingston HyperX T1 120GB OCZ Agility 3 Reusing the following items from my old pc, these have been working for years without trouble:
BSOD Help and Support
BSOD - Computer Reboot Issue
Hardware is about 3 years old. My PC reboots a few times a day and has been for a few days. It started back in November but was intermittent. Now it's every couple hours. Here is the logs.. any help is appreciated.
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:19.
Twitter Facebook Google+