Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSODs - Help Required with dump Files

04 Nov 2010   #21
CloudShadow

Windows 7 Home Premium 32bit
 
 



I reinstalled windows, and everything was fine for a day and a half, and just now i got the same hardware error BSOD.

I really dont understand what could be wrong. Can there be a problem with my harddrive? or Power Supply?


My System SpecsSystem Spec
.
04 Nov 2010   #22
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

As I mentioned the new install probably would not work. Its hardware
Boot the computer tell me about the beeps.
One beep
one long one short
two short etc
My System SpecsSystem Spec
04 Nov 2010   #23
CloudShadow

Windows 7 Home Premium 32bit
 
 

I dont hear any beeps.
My System SpecsSystem Spec
.

04 Nov 2010   #24
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

If a new install did not work, its hardware. Lets start with step one. Do it slowly and carefully.
Be sure you are not over heating
Make sure that the PSU is sufficient
Memory is a big cause, be sure that it was done correctly

I cant help more than this, everything is in the link that I gave you.
I can answer questions.
My System SpecsSystem Spec
05 Nov 2010   #25
CloudShadow

Windows 7 Home Premium 32bit
 
 

Sorry to disturb you mate, but can you look at these two dumps and confirm if they have the same error.

Also, is there no other information in the dump files?
My System SpecsSystem Spec
05 Nov 2010   #26
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

STOP 0x0000007F: UNEXPECTED_KERNEL_MODE_TRAP

Usual causes: Memory corruption, Hardware (memory in particular), Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack

Code:
  Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\richc46\AppData\Local\Temp\Temp1_Minidump[1].zip\110510-31640-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0x82c45000 PsLoadedModuleList = 0x82d84570
Debug session time: Fri Nov  5 11:40:27.328 2010 (GMT-4)
System Uptime: 0 days 5:05:13.500
Loading Kernel Symbols
...............................................................
................................................................
.....................
Loading User Symbols
Loading unloaded module list
..............
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 7F, {d, 0, 0, 0}
Probably caused by : ntkrnlmp.exe ( nt!KiSystemFatalException+f )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************
UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault).  The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
        use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
        use .trap on that value
Else
        .trap on the appropriate frame will show where the trap was taken
        (on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000d, EXCEPTION_GP_FAULT
Arg2: 00000000
Arg3: 00000000
Arg4: 00000000
Debugging Details:
------------------

BUGCHECK_STR:  0x7f_d
CUSTOMER_CRASH_COUNT:  1
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
PROCESS_NAME:  System
CURRENT_IRQL:  1c
UNALIGNED_STACK_POINTER:  82d63acd
LAST_CONTROL_TRANSFER:  from 82c7467f to 82c7e2bb
STACK_TEXT:  
82d63ae5 82c7467f badb0d00 00000000 20ffffff nt!KiSystemFatalException+0xf
82d63b78 00000000 00002600 00000000 0011e200 nt!KeAccumulateTicks+0x3c5
You have given me two reports. The first was the old 124 with the same information.The second was BC 7F. I have given you the causes for 7F , above
Again, memory comes up. Bios, also, comes up. This is something that should be handled by a professional. A little mistake when working on the Bios can make your computer an expensive paper weight. Mother Board can also be a cause.
My System SpecsSystem Spec
05 Nov 2010   #27
CloudShadow

Windows 7 Home Premium 32bit
 
 

hm... the second one was the most recent one, i guess i'll try a BIOS upgrade. I already did it once, everything went fine then, the same should be the case now.

thanks for the constant help mate,
My System SpecsSystem Spec
05 Nov 2010   #28
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

I want to help as much as I can, but that 124 is a pain. You know as much as I do on it now. The 124 is the important one as it keeps popping up. We can use the BC codes of 7F etc, to look for hardware that is mentioned.
My System SpecsSystem Spec
08 Nov 2010   #29
CloudShadow

Windows 7 Home Premium 32bit
 
 

Hi mate, wanted to bump this topic and say that i think i have found the culprit hardware.

its the processor

I searched around a bit on the forum, and saw some people suggesting Prime95 as a CPU stress test. Well i downloaded that, and after 10 seconds of testing my system crashed with the same error.

I rebooted, ran the test again, and the pc crashed once more with the same error


I've attached the dump files for both these crashes. Please advice now.
My System SpecsSystem Spec
08 Nov 2010   #30
richc46

Microsoft Community Contributor Award Recipient

Windows 10, Home Clean Install
 
 

You are correct both reports show a 124, hardware error. You were there, if you feel that the BSOD was caused by the test, then you found the answer. That stress test was mentioned in the Code 124 post that I gave you a the beginning of all this; so its results are considred accurate. If that was indeed the cause you may need a new CPU.
My System SpecsSystem Spec
Reply

 Random BSODs - Help Required with dump Files




Thread Tools




Similar help and support threads
Thread Forum
BSODs but no longer seem to create dump files
First, let me say that the info on this site is a tremendous resource. You guys are great to run this. I started getting kernal_data_inpage_error BSODs about a month ago. I found your site and found minidumps were being created in c:\windows\minidump\ just like the site indicated. For the...
BSOD Help and Support
Random BSODs. Laptop doesn't always create dump files.
Hi there! This is my first time posting for BSOD help, so please let me know if I have missed something that I am meant to include. Sorry for the long description, but I wanted to be thorough. My wife and I have the same MSi laptops that we got at the end of 2011. My OS is Windows 7 Home...
BSOD Help and Support
Random BSODs, problem with minidump file but not with kernel mem dump
Hey, guys I have been having some odd behavior with my Win 7 (64) OS. First, I experienced several BSODs but no files were written to my windows\minidump directory. I made sure to have the Startup and Recovery settings selected (ie., Write an Event checkbox was selected and small memory dump was...
BSOD Help and Support
Random BSOD's with no real pattern. Required files attached.
Hi, PC Info : X64 Windows 7 (full retail) The system is around 3.5yrs old. OS is around the same.
BSOD Help and Support
Random BSODs + Memory Dump Fail
Hey. I've been having a lot of trouble with my PC lately. Randomly it has been freezing and going to a bsod. It started a couple months ago but recently has been getting worse. When it occurs the mouse gets very buggy and ultimately freezes up and then goes to BSOD. Computer Specs Custom built...
BSOD Help and Support
Repeated BSODs, Dump files included
Hi everyone, My PC has been getting a lot of BSOD's lately, and sometimes just plain crashes on startup. I've reformatted several times, and the problem keeps coming back. I thought it might be faulty RAM, so I ran Memtest, which showed that one of my sticks was faulty (I had 3 x 2GB DDR3 RAM)....
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:12.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App