Intermittent Restarting BSOD

Hello Guys.

Basically to cut a long story short, this is relating to this thread that I posted the other day:
Startup repair problems keep occuring

-Windows 7 64bit
-Purchased Upgrade copy but clean installed
-Windows 7 installation 2 days old
-Computer less than 1 month old.

Logs etc attached.

Any other questions just ask.

Thanks a lot for any help/advice guys! :)

This is possible caused by this out of date driver:

Code:

ASACPI   ASACPI.sys   Sun Mar 27 21:30:36 2005 (42476C4C)

The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 8th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).~USASMA

I can see exception code c000005 which is related to memory, and ntfs.sys which is hard drive related. Please perform these tests:
Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.

Disk Check
Perform this hard drive test:
HD Diagnostic

Try to update this driver if you can, I think this is chipset driver:

Code:

nvm62x64 nvm62x64.sys Fri Oct 17 16:01:06 2008 (48F8FD12)

nVidia Ethernet Networking Driver (nForce chipset driver)
Drivers - Download NVIDIA Drivers

I can see one dmp file blamed usbhub.sys. Do you use a usbhub?

Run a system file check please:
SFC /SCANNOW Command - System File Checker

BUGCHECK SUMMARY:

Code:

BugCheck 24, {1904fb, fffff88003c7bbd8, fffff88003c7b440, fffff880012f0c27}

Probably caused by : Ntfs.sys ( Ntfs!NtfsFindPrefixHashEntry+1fe )

Followup: MachineOwner
---------
BugCheck 3B, {c0000005, fffff80001df5f8c, fffff88002765ef0, 0}

Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+100 )

Followup: Pool_corruption
---------

Let us know if you need help

Tuan

Wow, sounds great to me. I think let the usbhub unplugged for awhile to see if the system work properly

I will be here waiting for your news

Can you please turn on Driver Verifier. The dmp now looks so broad that it's hard to know what is the cause. All the driver look up to date to me
Beyond that, please run Verifier with these settings:

Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
NOTE: You can use Low Resource Simulation if you'd like. From my limited experimentation it makes the BSOD's come faster.
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:

Code:

Delete these registry keys (works in XP, Vista, Win7):
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel

More info on this at this link: Using Driver Verifier to identify issues with Windows drivers for advanced users