Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Ntoskrnl.exe Blue Screen

14 Dec 2010   #91
cemcilfa

Windows 7 Ultimate x64
 
 

I am very thankful that you have helped me all this time to find it


My System SpecsSystem Spec
.
14 Dec 2010   #92
cemcilfa

Windows 7 Ultimate x64
 
 

I have inserted my Ram stick back into the slot and boosted my vis controll by o.100V
It now shows 1.2250V
My System SpecsSystem Spec
14 Dec 2010   #93
CarlTR6

Windows 7 Ultimate 32 bit
 
 

Quote   Quote: Originally Posted by cemcilfa View Post
I am very thankful that you have helped me all this time to find it
You are very welcome. That is what we try to do here.
My System SpecsSystem Spec
.

15 Dec 2010   #94
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Have you ran memtest86+?
My System SpecsSystem Spec
15 Dec 2010   #95
cemcilfa

Windows 7 Ultimate x64
 
 

i will run memtest tonight
If the errors come early shall i reboot or shall I wait for the whole 7 tests?
how would you like me to present the infomation to you?
My System SpecsSystem Spec
15 Dec 2010   #96
cemcilfa

Windows 7 Ultimate x64
 
 

I have received another BSod after inserting the RAM stick back in?
How would you like me to tun memtest86+
My System SpecsSystem Spec
15 Dec 2010   #97
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Run memtest86+ from a USB memory stick or DVD.

If you get errors you can stop the test.

If you get any errors just note them, if there are too many just note the first couple of errors.

Tell us if there are a couple of errors or 100 or 1,000.


After running memtest86+ if you get errors or not, bump the DRAM voltage 0.05v.

If it is 1.5v now bump it to 1.55v.

In your BIOS it's called 'DDR3 Voltage Control'.
Page 42 of your motherboard manual.

Then run memtest86+ again.

If you get any error, same as above, let us know.
My System SpecsSystem Spec
16 Dec 2010   #98
cemcilfa

Windows 7 Ultimate x64
 
 

I did not get any errors with the Module taken out
Now that I found the cause of the issue I beleive I can handle it from here
both CarlTR6 and Dave76....THANK YOU VERY MUCH
My System SpecsSystem Spec
16 Dec 2010   #99
CarlTR6

Windows 7 Ultimate 32 bit
 
 

You are very welcome. I am glad we could help. Dave did the work; he is the RAM Guru.
My System SpecsSystem Spec
17 Dec 2010   #100
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Did you bump the RAM voltage and run memtest86+?

This doesn't mean you have a bad RAM card.

When you have large capacity RAM cards it usually takes a little more voltage to run them, when you have four RAM cards it will also take more voltage to run stable.
You have both, it will take voltage bumps for the RAM cards and for the CPU NB VID to run stable.

With one card taken out your system runs stable, the possibilities are they need a voltage bump, maybe bad RAM card, maybe bad RAM slot.

Easy way to test this is to follow the memtest86+ tutorial.
If you test the RAM cards, usually one at a time, since your system runs stable with three cards I would test two cards at a time, if they pass testing them in all four slots then the RAM and slots are good.
You just need to find the right voltage settings, RAM and CPU NB VID.

If you get different RAM at 16GB, 4 X 4gb, you will likely still have to adjust voltages to get it to run.

Let us know if you want to continue.
My System SpecsSystem Spec
Reply

 Ntoskrnl.exe Blue Screen




Thread Tools




Similar help and support threads
Thread Forum
Another Blue Screen - ntoskrnl.exe
Hello everyone, This is my first post here. I tried to follow the posting guidelines as best I could. The zip for my dump files should be attached. If you need additional information please let me know. A while back I started getting blue screen crashes. Once a day usually... sometimes even...
BSOD Help and Support
Blue Screen - ntoskrnl.exe?
Hi. I'm not very good with all the technical stuff, so I found the instructions in the Posting Instructions a little daunting. I will proceed to gether information that way if required, but I'm hoping this will do. I've had this pop up twice in two weeks, and this is what I get: ...
BSOD Help and Support
Blue Screen - ntoskrnl.exe
Just built a brand new computer. Reinstalled all the correct and up to date drivers. Everything to my knowledge is up to date. I keep getting random crashes and upon looking at the minidump, it seems to be all related to ntoskrnl.exe I get these constantly and without remorse. Doing anything on my...
BSOD Help and Support
Help! Blue screen - ntoskrnl.exe ?
Please Delete thread
BSOD Help and Support
Blue Screen (ntoskrnl.exe)
Hi everybody! I have a problem with mi laptop, the blue screen appeas sometimes ONLY when I reset my laptop or when it's shutting down. The last time before yesterday was a month ago when it happens. My laptop specs are: - Sony Vaio VPCF1390x - Intel Core i7-740QM - 4GB Memory DDR3 - Blu-ray...
BSOD Help and Support
ntoskrnl.exe blue screen
Hello I have replaced the graphics card, hardrive and psu since I first got the BSOD messages and still nothing worked :/ I have attached the .dmp files :)
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:00.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App