ok.. got a brand new MB. STILL same problem


  1. loueber
    Posts : 11
    W7 64bit
       New #1

    ok.. got a brand new MB. STILL same problem


    i was fed up with old MB, and got new board, with higher revision..
    but just got another BSOD.
    how is that possible?
    ill be really mad if this bsod is from the realtek lan driver...


    please let me know...
      My Computer
    Quote Quote

  3. usasma
    Posts : 5,705
    Win7 x64 + x86
       New #2

    Perfmon reports several devices without drivers installed. Did you install all drivers when you got the new mobo?
    Please got to Device Manager and find out which one's need to be updated.

    There are 11 hotfixes installed on your system, there are over 55 available for Windows 7 installations. Please visit Windows Update and get all the updates available for your system.

    MSINFO32 shows these problem devices:
    Multimedia Controller PCI\VEN_1002&DEV_AC02&SUBSYS_B3001002&REV_00\4&5B6B27D&0&0048 The drivers for this device are not installed.

    Not Available ACPI\AWY0001\2&DABA3FF&1 The drivers for this device are not installed.

    EPSON Scanner 010F USB\VID_04B8&PID_010F\5&2E822EC5&0&1 The drivers for this device are not installed.
    MSINFO32 shows one BSOD of STOP 0x9F in TCPIP.SYS on 07 Nov 2010
    The actual memory dump blames Rt64win7.sys - a driver component of your Realtek PCIe GBE Family Controller

    Please do the following:
    - download a fresh copy of the drivers for your Realtek PCIe GBE Family Controller from this link: Realtek
    - uninstall the current software/drivers from your system
    - install the freshly downloaded drivers
    - monitor for further BSOD's.

    FWIW - your Cyberlink driver is from 2008 and should be updated

    BSOD BUGCHECK SUMMARY
    Code:
    
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sun Nov  7 12:23:21.816 2010 (UTC - 5:00)
System Uptime: 0 days 15:49:14.736
Probably caused by : pci.sys
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`04c03a20 fffff800`00b9c518 fffffa80`08cb5010
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sun Nov  7 07:46:30.795 2010 (UTC - 5:00)
System Uptime: 1 days 3:11:15.075
Probably caused by : pci.sys
DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT
BUGCHECK_STR:  0x9F
PROCESS_NAME:  System
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`04c06a20 fffff800`00b9c518 fffffa80`049c5300
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
      My Computer
    Quote Quote

 

  Related Discussions
i want the best brand of 780 ti that has best performance i got a pny 780 ti but i asked the shop to exchange the brand so i need suggestion of a brand of 780 ti
First of all, I have no idea where this post should be as there does not seem to be a server section. Second of all, I am unfamiliar with servers. I am purchasing a Lenovo TS130 1105 as a cheap home media/backup server. I already have a couple of 2TB drives that I would like use in this but as far...
Dear Sir, We are using CISCO CATALYST 24 PORT 2960G series switch & no more port available in this switch. We need more ports for few pc connections. I want to connect D-LINK FIBER MEDIA CONVERTER & 6/8 PORT SWITCH to extend more port but Our IT department person saying that D-LINK SWITCH...
Different Brand RAM and my OC
in PC Custom Builds and Overclocking

Hello :) I have some OCZ DDR3 Platinum 2x2gb 1333Mhz installed on my Asus M4N98TD at the moment. I also have 2x2GB AData DDR3 1333Mhz RAM stashed away from when I was having some POST problems with this build and wanted new RAM to test. I've overclocked my AM3 965 to 3.8Ghz. I tried to...
I just unpacked my custom build and got it turned on.. went to try and get the internet working, and for the life of me.. i can't figure it out. I don't even have a little wireless bar down in the right hand corner. when i try to connect to a network in network and sharing center, it wants me to...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 й Designer Media Ltd
All times are GMT -5. The time now is 11:13.
Find Us