Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Blue screen error..plz i need help

25 Dec 2010   #31
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

What is your current BIOS version?
Your motherboard website is showing a lot of new BIOS versions correcting RAM issues. I would update it if you don't have the latest version, 1502.

It's not un-common to get no errors on one memtest86+ run and then errors if you run it again. This is for the same reason that you don't get BSoDs every minute your computer is running.
Sometimes the RAM errors can be corrected by adjusting the settings.
Did you follow this tutorial?
RAM - Test with Memtest86+

Can you download CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.

For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums


Have you been checking your temperatures?

Use Real Temp or Speed Fan, run one of these and check the CPU temps when at idle, under load and/or testing.
Let us know the minimum and maximum temps you get.

ASUS P7P55D-E Pro manual page 3-20.
Go to your BIOS and get the DRAM voltage and IMC voltage, post them here.
Intel strongly recommends these two voltages be kept within 0.5v of each other, to prevent damage to the CPU.



My System SpecsSystem Spec
.
28 Dec 2010   #32
Zan03

Windows 7 home premium 64bit
 
 

Hi Dave, my bios version is currently 1302 and yes i did what was instructed from memtest and found 1 stick of ram has error.. i will sent my ram back for a new and tested one from my distributor but as u can see from my previous post i had change my set of rams b4..since u stated that ram errors could be corrected by the right setting..should i attempt to update my bios version b4 i change this set of ram.As for CPUZ, CPU temp and voltage i will update u soon when i have the time
My System SpecsSystem Spec
28 Dec 2010   #33
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Before you send the RAM back again, post the CPUZ snips, you might need to adjust a couple of settings.


Your next BIOS version fixes some SpeedStep issues, this would be worth upgrading.
My System SpecsSystem Spec
.

29 Dec 2010   #34
Zan03

Windows 7 home premium 64bit
 
 

Hi Dave , here is the snip of CPUZ that u needed.thanks
My System SpecsSystem Spec
30 Dec 2010   #35
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

CPUZ shows you are overclocking, How are you overclocking your system?

Adjusting settings in BIOS?

Are you using ASUS TurboV EVO or Auto Tuning?

Are you using the D.O.C.P. for the RAM?

These OC tools will sometimes work on very small OC but, usually set too much voltage and other settings incorrectly.

How did you get the RAM to 1600 MHz?
It will default to 1333 MHz.


Go to your BIOS and check the voltages and post them here for:
Current CPU Core Voltage
Current IMC Voltage
Current DRAM Voltage

In your BIOS go to 'AI Tweaker', scroll down on first page for this info.

With this info, we can see what happened to the CPU and RAM settings.

Using any of these "Auto Overclocking" tools are likely the cause of your crashes.




My System SpecsSystem Spec
30 Dec 2010   #36
Zan03

Windows 7 home premium 64bit
 
 

i am using xmp profile under ai tweaker and it auto adjust the voltage..i have tried setting it back to default 1333mhz but still errors on memtest and bsod for memory management.does this shows i got bad ram?
My System SpecsSystem Spec
31 Dec 2010   #37
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

The possibilities are the settings need to be adjusted or bad RAM.

Getting no errors, then getting errors on another test indicate your settings are in need of tweaking.
Getting errors on new RAM indicates the possibility of settings issues.

It is possible to get two sets of bad RAM, but I would adjust the settings to be sure.


When you turn off XMP does the CPUZ CPU tab 'Bus Speed' go back to 133 MHz?

Post the voltages:

Quote:
Go to your BIOS and check the voltages and post them here for:
Current CPU Core Voltage
Current IMC Voltage
Current DRAM Voltage

In your BIOS go to 'AI Tweaker', scroll down on first page for this info.
My System SpecsSystem Spec
31 Dec 2010   #38
Zan03

Windows 7 home premium 64bit
 
 

Hi Dave,

THe voltages when xmp profile is on:
Cpu core voltage - Auto
Current CPU core voltage - 1.152
IMC voltage - Auto
Current IMC voltage-1.162
DRAM voltage -1.600
Current DRAM voltage - 1.600

When i load default setting
CPU Core Voltage - Auto
Current CPU core voltage - 1.152
IMC voltage - Auto
Current IMC voltage-1.162
DRAM voltage -Auto
Current DRAM voltage - 1.600

And here is a snip of CPUZ when i load default setting
My System SpecsSystem Spec
01 Jan 2011   #39
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Leave it on default settings.

Manually change the IMC voltage to 1.2v.

Change the RAM 'Command Rate' to 2T.

Run memtest86+ again.

Let us know the results.
My System SpecsSystem Spec
03 Jan 2011   #40
Zan03

Windows 7 home premium 64bit
 
 

Hi Dave, setting to default will leave it on auto setting and i cant find where is ram command rate.
My System SpecsSystem Spec
Reply

 Blue screen error..plz i need help




Thread Tools




Similar help and support threads
Thread Forum
Blue Screen Error but no actual blue screen pops up
While using my laptop, usually when trying to open some "windows" application such as task manager, wireless networks, documents, media player, windows updater etc. my laptop freezes or doesn't allow me to click on anything except the minus button on all my windows and the start button. I'll try to...
BSOD Help and Support
Windows 7 x64 Blue Screen error, memory corruption/dll error
I have absolutely no idea what is causing this but I can provide all of the blue screen error text (blue screen viewer is awesome). I can say that the first time it happened I was just playing World of Warcraft when the game crashed to windows which soon after crashed and went to a blue screen...
BSOD Help and Support
Help with blue screen auto reboot, Stop: 0x0000007B error screen
Hello, I have an HP Pavilion g series laptop (running win7) that is in a continuous restarting loop. This happened after the computer auto updated (windows update). I do not know what was updated, but now every time the laptop starts up it seems to be in a continuous rebooting loop after the...
BSOD Help and Support
BSOD error dump files (blue screen error) please help
https://www.sevenforums.com/attachment.php?attachmentid=188494&stc=1&d=1324019702 dump file attachment I am getting the blue screen error. but it is not significant. happens anytime. sometims pc works 24 hours without error. somtimes it comes. please help.
BSOD Help and Support
Blue Screen Error and Change of Screen Resolution
I have a Lenovo ThinkPad Edge 15. The problem I am facing now is The screen resolution changes by itself and after this, a blue screen error comes and computer restarts again. Please Help me on this.. Operating System: Windows 7 Ultimate N (32 Bit) Processor: Core i3
BSOD Help and Support
Blue screen error: With various Error Code (Help pls)
Hi folks, Recently I built a new system and installed with Win7 64bit. Since then, I have been encountering various blue screen errors, after installing various software. However, at the basic (without installing any programs) it work fine. PC Configuration: Processor: AMD Phenom (TM) II...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:44.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App