New
#11
** Quick Update based on my last post **
I setup Memtest to run overnight and right off the bat there were 200+ errors (in the first few seconds). Strange since when I ran it for 2+ hrs earlier there were no errors reported.
I then checked the Bios and changed the XMP setting to Profile1. That changed the settings based on the details of my RAM (Seen here: Newegg.com - CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model TR3X6G1333C7 G)
Memory Frequency (Mhz) 1333
DDR Voltage 1.65v
Timing: 7 7 7 20
The Default settings were
Memory Frequency (Mhz) 1066
DDR Voltage 1.5v
Timing 8 8 8 20
Running Memtest with both settings Default/Auto and Profile1 had immediate errors show in Memtest.
I currently have it running all night at the Auto settings (610 errors so far at Test 4). All six slots are filled, will I be able to tell which slots the errors are coming from in the morning?s
Thanks again for all the help, it is always appreciated!!