Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: windows 7 Bsod after windows logo

25 Nov 2010   #1

Windows 7 Ultimate Edition 32bit
windows 7 Bsod after windows logo

OK gentlemen

since last month i've been having this anoying problem.

When i start up my pc everything works as expected up untill the windows logo loading screen, the loading works fine, BUT after the loading ends instead of the mouse pointer appearing as it should, i have instead just a black screen and then after a while i get a BLUE SCREEN!!

And then the computer restarts and then everything works, BUT my computer is slower than usual after it restarts!
for example if i play music it will look like its playing in slow motion (the sound will sound slower)
and my games will slower than usual as well.

the type of error i read on the blue screen was the 0x0000116.

i've tried everytning!
-ive deteled and reinstalled my drivers (using driver sweeper)
-startup repair didnt work
-No, my graphics card isnt over-heating ( Nvidia Geforce 8800 GS)
-i still haven checked for dust acumulating (will do on this weekend)

here is the minidump file if it does any help
and thank you in advance!

My System SpecsSystem Spec
25 Nov 2010   #2

Windows 7 Professional x64

Bugcheck 0x116 is usually a graphics issue. Read about it here: STOP 0x116: VIDEO_TDR_ERROR troubleshooting

Do you have another graphics card that you can borrow? If not, try purchasing one from a store that will allow you to return it, if it turns out not to be the problem.

If the BSODs persist, please use our BSOD sticky:

...Summary of the dumps

Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Thu Nov 25 05:24:08.522 2010 (UTC - 5:00)
System Uptime: 0 days 0:00:55.567
*** WARNING: Unable to verify timestamp for dxgkrnl.sys
*** ERROR: Module load completed but symbols could not be loaded for dxgkrnl.sys
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
FAILURE_BUCKET_ID:  0x116_IMAGE_nvlddmkm.sys
My System SpecsSystem Spec
25 Nov 2010   #3

64-bit Windows 8.1 Pro

This one looks like a bad video driver ... completely remove your current drivers with DriverSweeper and reinstall the latest version from Nvidias' support page...

Try removing any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads

*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Attempt to reset the display driver and recover from timeout failed.
Arg1: c51c2008, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: d011f176, The pointer into responsible device driver module (e.g. owner tag).
Arg3: 00000000, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 00000002, Optional internal context dependent data.

d011f176 55              push    ebp

SYMBOL_NAME:  nvlddmkm+ee176

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nvlddmkm

IMAGE_NAME:  nvlddmkm.sys


FAILURE_BUCKET_ID:  0x116_IMAGE_nvlddmkm.sys

BUCKET_ID:  0x116_IMAGE_nvlddmkm.sys

Followup: MachineOwner
Rt86win7.sys Thu Feb 26 04:04:22 2009 (49A65B16) ... Realtek network driver. .. Realtek
My System SpecsSystem Spec

25 Nov 2010   #4

Windows 7 Ultimate Edition 32bit

ok i will try these out and report to you
My System SpecsSystem Spec

 windows 7 Bsod after windows logo

Thread Tools

Similar help and support threads
Thread Forum
BSOD after Windows Logo
Hi I bought a new PC case and have fitted everything from the old case to the new case (No new hardware, just a straight swap). All plugged in and wired up etc but seem to be having a problem booting to my SSD. Boot up PC and BIOS recognizes the SSD. Then it tries to boot into Windows and...
Hardware & Devices
BSOD after Windows 7 logo
I just installed windows 7 on a fresh Hard disk on one computer. I put the hard drive into my other computer and after the windows logo it shows a BSOD (even in safe mode). The error code is "STOP: 0x0000007B (0xFFFFF880009A9928, 0xFFFFF880009A9928, 0x000000000... etc)" What do I do; as I...
Installation & Setup
BSOD On Windows Logo
My system first started to do some weird glitches like holds up for a few moments, than my mouse icon get weird graphics. So upon seeing some things I did Verifier and bam BSOD on the windows logo screen right away and a few times after so I know it a driver. I turn off Verifier and here is my Dump...
BSOD Help and Support
BSOD after Windows Logo
Hey guys... So my sister's laptop crashed after she started some game she didn't play in ages (Sims). It won't load the windows after the Windows logo. Only a BSOD. I can't go into safe mode, also I tried to restore to some restore point via the Windows Recovery which I can access. Any ideas? I...
BSOD Help and Support
BSOD After windows 7 logo
i had recently reformatted my friends computer and installed w7 ulti x86, and it had been workig fine for a while but now its constantly BSOD right after the w7 loading bar so i dont know how i can get minidumps it also does it if i boot in safe mode. im stumped and dont know wat else i can do i...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 16:16.
Twitter Facebook Google+