New
#11
Memest86 3.5 just freezes.
Memtest86 4.1 gives the memory a clear bill for two passes.
I am considering RMA but would like to be sure board is faulty and not me.
Memest86 3.5 just freezes.
Memtest86 4.1 gives the memory a clear bill for two passes.
I am considering RMA but would like to be sure board is faulty and not me.
Do at least 7 passes, if no errors are reported then its likely the board or a BIOS issueMemtest86 4.1 gives the memory a clear bill for two passes.
Try updating the BIOS
I just completed a 28+ hour, 20 pass. memtest86 v 41.0, test on my memory. There were 0 errors.
If Gigabyte Tech does not come up with something soon I plan to "bite the bullet, and RMA this motherboard after the Christmas mailing rush is over.
I can not see anything but the board and it's components that would cause the symptoms I have. Mainly the inability to set memory and voltage values while in Bios Setup.
Thanks to yowanavista and all for your help. MERRY CHRISTMAS !!
jokdom (first three letters are my initials, last three my description)
OH OH! a new bsod. Not 241 this time but 9F.
Tried to run Belarc Advisor and got "rundll32 not operating".
Was looking into this when the bsod happened.
I have no floppy drive and have disabled it.
I hope yowanvista can decipher the dump attached.
I looked into RMAing this mobo back to US but decided it would be better for me just to get another one. Hopefully one without the issues I have had with this one.
In the meantime I am trying to get some use from this mobo.
Yowavista please help.