Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Repeated BSODs, Dump files included

05 Dec 2010   #1
Braindead

Windows 7 Ultimate x64
 
 
Repeated BSODs, Dump files included

Hi everyone,

My PC has been getting a lot of BSOD's lately, and sometimes just plain crashes on startup. I've reformatted several times, and the problem keeps coming back. I thought it might be faulty RAM, so I ran Memtest, which showed that one of my sticks was faulty (I had 3 x 2GB DDR3 RAM). I took 1 stick out, and ran memtest again, and it showed no errors after 10 passes. I reinstalled windows again, and I've still been getting BSODs.

I've attached the files required by the BSOD posting instructions thread.

I'm running:
Windows 7 x64 OEM
Hardware is only about 6 months old.
Running an almost fresh install of windows ATM


My System SpecsSystem Spec
.
05 Dec 2010   #2
Braindead

Windows 7 Ultimate x64
 
 

-BUMP-...any ideas anyone?
My System SpecsSystem Spec
06 Dec 2010   #3
Braindead

Windows 7 Ultimate x64
 
 

New BSOD Mindump file attached..(from a fresh BSOD )

Also, can someone tell me which version of the Symbols I should be downloading? I've tried both the x64 Windows 7 RTM files (from this page: Download Windows Symbol Packages), and both times, my windbg says the symbols are wrong
My System SpecsSystem Spec
.

06 Dec 2010   #4
wish

Windows 7 Ultimate x64 SP1
 
 

Hello,
Your dmp files = 0x50, 0x1E, 0xA → can be caused by RAM or 3rd drivers.

Go to device manager, and see it there is any yellow exclamation so you need to install the proper driver for its device.

Update your Marvel Yukon PCI-E Gigabit Ethernet driver:
yk62x64.sys Mon Feb 23 07:02:27 2009 → Marvell: Support

Then see if the problem persist, test your RAM with memtest86 for at least 7 passes.
RAM - Test with Memtest86+

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff8a0199fc6b0, 1, fffff8800103eb37, 2}


Could not read faulting driver name
Probably caused by : memory_corruption

Followup: memory_corruption
---------

6: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: fffff8a0199fc6b0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff8800103eb37, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 0000000000000002, (reserved)

Debugging Details:
------------------


Could not read faulting driver name

WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002d070e0
 fffff8a0199fc6b0 

FAULTING_IP: 
fltmgr!TreeInsert+7b
fffff880`0103eb37 4c899248894a18  mov     qword ptr [rdx+184A8948h],r10

MM_INTERNAL_CODE:  2

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  CODE_CORRUPTION

BUGCHECK_STR:  0x50

PROCESS_NAME:  services.exe

CURRENT_IRQL:  1

TRAP_FRAME:  fffff8800287fb10 -- (.trap 0xfffff8800287fb10)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff8a001553d68 rbx=0000000000000000 rcx=fffffa8005ec0898
rdx=fffff8a001553d68 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800103eb37 rsp=fffff8800287fca8 rbp=fffff8a001553da0
 r8=fffffa8005e37320  r9=fffffa8006123010 r10=fffff8a000efced8
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na po nc
fltmgr!TreeInsert+0x7b:
fffff880`0103eb37 4c899248894a18  mov     qword ptr [rdx+184A8948h],r10 ds:cde0:fffff8a0`199fc6b0=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002b4e8f2 to fffff80002acf740

STACK_TEXT:  
fffff880`0287f9a8 fffff800`02b4e8f2 : 00000000`00000050 fffff8a0`199fc6b0 00000000`00000001 fffff880`0287fb10 : nt!KeBugCheckEx
fffff880`0287f9b0 fffff800`02acd82e : 00000000`00000001 00000000`00000000 fffff880`00000200 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x40ec0
fffff880`0287fb10 fffff880`0103eb37 : fffff880`0103e65f 00000000`00000000 fffffa80`05ec0820 fffffa80`0567cde0 : nt!KiPageFault+0x16e
fffff880`0287fca8 fffff880`0103e65f : 00000000`00000000 fffffa80`05ec0820 fffffa80`0567cde0 fffff880`02881000 : fltmgr!TreeInsert+0x7b
fffff880`0287fcb0 fffff880`0105b5ef : 00000000`00008000 fffffa80`05ec0820 fffffa80`06123010 fffff880`0287fee8 : fltmgr!FltpGetFileNameInformation+0x37f
fffff880`0287fd30 fffff880`0164eada : fffffa80`0567cde0 00000000`00000000 00000000`00000594 fffffa80`062abd40 : fltmgr!FltGetFileNameInformationUnsafe+0x7f
fffff880`0287fda0 fffff880`0164edb3 : 00000000`00000000 fffff880`02880ca0 00000000`00000594 00000000`00000000 : tcpip!WfpAleCaptureImageFileName+0x3a
fffff880`0287fdf0 fffff880`0164f02e : fffffa80`05e37320 00000000`00000000 00000000`00000000 00000000`00000000 : tcpip!WfpCreateProcessNotifyRoutine+0x63
fffff880`0287fed0 fffff800`02d99e8f : fffffa80`05e37320 fffff880`02880ca0 fffffa80`05e37320 00000000`00000002 : tcpip!CreateProcessNotifyRoutineEx+0xe
fffff880`0287ff00 fffff800`02d7b277 : fffffa80`05e6d060 fffffa80`05e3d060 fffff880`028801b0 fffff880`028800ec : nt!PspInsertThread+0x74f
fffff880`02880080 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!NtCreateUserProcess+0x732


STACK_COMMAND:  kb

CHKIMG_EXTENSION: !chkimg -lo 50 -d !fltmgr
    fffff8800103eb39 - fltmgr!TreeInsert+7d
    [ 12:92 ]
1 error : !fltmgr (fffff8800103eb39)

MODULE_NAME: memory_corruption

IMAGE_NAME:  memory_corruption

FOLLOWUP_NAME:  memory_corruption

DEBUG_FLR_IMAGE_TIMESTAMP:  0

MEMORY_CORRUPTOR:  ONE_BIT

FAILURE_BUCKET_ID:  X64_MEMORY_CORRUPTION_ONE_BIT

BUCKET_ID:  X64_MEMORY_CORRUPTION_ONE_BIT

Followup: memory_corruption
---------
My System SpecsSystem Spec
Reply

 Repeated BSODs, Dump files included




Thread Tools




Similar help and support threads
Thread Forum
BSOD - Dump files included error:
Hey Guys, I have been experiencing a really werid issue I cannot figure out. I was hoping you could give me a hand in identifying the culprit. Its hard to get the issue fixed because it happens at random intervals it can happen twice a week then not happen for a month. -When the issue occurs...
BSOD Help and Support
Repeated BSOD after 30seconds unless in safe mode, dump file included.
I'm at a loss as to what to do here. My brother installed windows 7 ultimate on my pc nearly a year ago and all has been well until about a week ago. While my husband was playing silly games on FB some win7 virus protector popped up. I never got a look at it myself, he said it crashed the pc and...
BSOD Help and Support
BSOD while playing BF3, Dump files etc included
Hey there Guys and Girls, Recently i built my own pc from ground up to my own likings and word of mouth, reviews of certain products etc. My system is no longer then about 3 weeks old now and i have not installed one 2nd part either, all brand new so it frustrates me to get such a bad error...
BSOD Help and Support
Can someone identify what is causing my BSODs? Dump included.
Here's the dump. If anyone can isolate the problem I would really appreciate it. I have no idea what's causing these BSODs. System Info: HP HDX 16-1160us C2D 2.4 P8600 9600M GT 6GB DDR2 RAM
BSOD Help and Support
Numerous BSODS (Dump & Info Included)
Hi, Got new computer a month or so ago, was fine for first few weeks but suddenly started having an onset of BSODs, mostly when loading games or web pages with certain graphical elements. Pc Is: I7 920 overclocked to 3.8ghz Asus P6X58D-E 3x2gb Corsair pc12800 DDR3 1600mhz RAM (this is...
BSOD Help and Support
nwifi.sys BSOD. Dump Files Included.
Well, I thought my nwifi.sys BSOD's had stopped, but apparently not. It seems to happen when there is very high network traffic. Included are the dump files. Any help is greatly appreciated.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:17.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App