New
#11
As far as drivers goes... the one for atheros is working, but marvell is not. It is saying marvell is up to date
As far as drivers goes... the one for atheros is working, but marvell is not. It is saying marvell is up to date
Date of your current Yukon drivers:Date of the new drivers: 9/15/2010.Code:yk62x64.sys Mon Sep 28 04:19:31 2009 (4AC07193)
Try uninstalling the drivers for your Marvell card in Device Manager, then manually installing the new drivers. See this tutorial: Driver Install - Device Manager
Also, enable driver verifier again, and leave it running for about 24 hours, unless it BSODs before then. In the meantime, use the computer as you normally would.
Driver installed good. Still getting BSOD.
I've researched a little and did a test to see. Openning my fonts folder causes a BSOD. I googled and searched and it seems a corrupt mathamatica font causes this problem? How may I fix a corrupt font like that or remove it if I can't open the fonts folder even.
You have been tremendous help by the way Jonathan
Good work on the Fonts issue!
First, make a backup of your Fonts folder; just copy it to the desktop or some other location.
Then, try deleting your fonts and installing them again.
Fonts - Install
If you have to, you can restore the old fonts folder.
Eventually after many hours the fonts got reset and re-installed... and it solved the problem
To be safe I also cleared out my old restore points in case it restores the computer to a point in which the fonts were corrupted.
Problem is solved, I appreciate the assistance in discovering it was not the actual hardware on this problem, but software. It was likely caused by a corrupt update.
Thanks!