Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Help!! Bsod t_t

10 Dec 2010   #1
silveria63

Windows 7 Home Basic 32bit
 
 
Help!! Bsod t_t

can anyone help me? im having problem with my PC..
it always get BSOD..

i uploaded the zip file of my minidump.:
help please..


My System SpecsSystem Spec
.
10 Dec 2010   #2
wish

Windows 7 Ultimate x64 SP1
 
 

Hi,
It seems you have drivers issue, so I recommend you to update these drivers:
Code:
ASACPI.sys   Thu Aug 12 19:52:52 2004Asus ATK0110 ACPI Utility
sisagpx.sys  Tue Jan 23 23:01:26 2007 → SIS AGP driver
smserial.sys Fri Sep 26 01:23:38 2008 → Motorola SM56 voice modem driver
And two dmp files point to your Graphic driver as the cause, so you must update the Graphic Card driver as well.
Before update, better to remove current driver with driversweeper then install the fresh copy of your ATI drivers.
Guru3D - Driver Sweeper
AMD.com | Support & Downloads

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000008E, {c0000005, 8f632f44, 961a09ac, 0}

Unable to load image \SystemRoot\System32\drivers\dxgkrnl.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dxgkrnl.sys
*** ERROR: Module load completed but symbols could not be loaded for dxgkrnl.sys
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::CloseAllocation+28 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
This is a very common bugcheck.  Usually the exception address pinpoints
the driver/function that caused the problem.  Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003.  This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG.  This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG.  This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: 8f632f44, The address that the exception occurred at
Arg3: 961a09ac, Trap Frame
Arg4: 00000000

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".

FAULTING_IP: 
dxgmms1!VIDMM_GLOBAL::CloseAllocation+28
8f632f44 890a            mov     dword ptr [edx],ecx

TRAP_FRAME:  961a09ac -- (.trap 0xffffffff961a09ac)
ErrCode = 00000002
eax=8622e998 ebx=8240cf78 ecx=8240cf78 edx=7dbfcf78 esi=8240cf78 edi=00000000
eip=8f632f44 esp=961a0a20 ebp=961a0a30 iopl=0         nv up ei pl nz ac po nc
cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010212
dxgmms1!VIDMM_GLOBAL::CloseAllocation+0x28:
8f632f44 890a            mov     dword ptr [edx],ecx  ds:0023:7dbfcf78=????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x8E

PROCESS_NAME:  danceclient.ex

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from 8f61632b to 8f632f44

STACK_TEXT:  
961a0a30 8f61632b 8240cf78 00000000 961a0abc dxgmms1!VIDMM_GLOBAL::CloseAllocation+0x28
961a0a40 8e36b4aa 85e8f000 8240cf78 00000000 dxgmms1!VidMmCloseAllocation+0x13
WARNING: Stack unwind information not available. Following frames may be wrong.
961a0abc 8e369481 00000000 00000000 a716f100 dxgkrnl+0x244aa
961a0ae4 8e36b95e 00000001 00000000 00000000 dxgkrnl+0x22481
961a0b08 8e36bd6e 00000000 00000000 a5d314b0 dxgkrnl+0x2495e
961a0b64 8e36c594 961a0b98 00000001 182c1f00 dxgkrnl+0x24d6e
961a0d28 8285844a 0012f3d0 0012f3e0 777464f4 dxgkrnl+0x25594
961a0d28 777464f4 0012f3d0 0012f3e0 777464f4 nt!KiFastCallEntry+0x12a
0012f3e0 00000000 00000000 00000000 00000000 0x777464f4


STACK_COMMAND:  kb

FOLLOWUP_IP: 
dxgmms1!VIDMM_GLOBAL::CloseAllocation+28
8f632f44 890a            mov     dword ptr [edx],ecx

SYMBOL_STACK_INDEX:  0

SYMBOL_NAME:  dxgmms1!VIDMM_GLOBAL::CloseAllocation+28

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: dxgmms1

IMAGE_NAME:  dxgmms1.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4a5bc265

FAILURE_BUCKET_ID:  0x8E_dxgmms1!VIDMM_GLOBAL::CloseAllocation+28

BUCKET_ID:  0x8E_dxgmms1!VIDMM_GLOBAL::CloseAllocation+28

Followup: MachineOwner
---------
My System SpecsSystem Spec
11 Dec 2010   #3
silveria63

Windows 7 Home Basic 32bit
 
 

oh.. tnx.. ill just follow recommendations..
and hope it will help.. =)
My System SpecsSystem Spec
.

Reply

 Help!! Bsod t_t




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:03.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App