Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Another BSOD 2nd fix attempt

15 Dec 2010   #1
adtheisen

Windows 7 Enterprise x64
 
 
Another BSOD 2nd fix attempt

I tried the following fixes below. It blue screened at 3:24 am and then again this morning while in use.

Getting frustrated and hoping that a format or reinstallation is not necessary.

Quote   Quote: Originally Posted by yowanvista View Post
Dumps blame MpFilter.sys, a module used by MSE or Windows Defender
If you are using Windows Defender, turn it off
Reinstall MSE

Code:
BugCheck 50, {ffffffffffffff8b, 1, fffff8800100ff64, 0}
 
Unable to load image \SystemRoot\system32\DRIVERS\MpFilter.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for MpFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for MpFilter.sys
My System SpecsSystem Spec
.
15 Dec 2010   #2
yowanvista

Windows 10 Pro x64, Arch Linux
 
 

Test your RAM with memtest
RAM - Test with Memtest86+
My System SpecsSystem Spec
15 Dec 2010   #3
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by adtheisen View Post
I tried the following fixes below. It blue screened at 3:24 am and then again this morning while in use.

Getting frustrated and hoping that a format or reinstallation is not necessary.

Quote   Quote: Originally Posted by yowanvista View Post
Dumps blame MpFilter.sys, a module used by MSE or Windows Defender
If you are using Windows Defender, turn it off
Reinstall MSE

Code:
BugCheck 50, {ffffffffffffff8b, 1, fffff8800100ff64, 0}
 
Unable to load image \SystemRoot\system32\DRIVERS\MpFilter.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for MpFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for MpFilter.sys

OK there are several problems.


1-memory corruption run memtest. I suspect a driver is causeing this but it isnt named.

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.


Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot. Test the sticks individually, and if you find a good one, test it in all slots.

2-Old storage drivers
dump_iaStorV.sys 4/8/2009 11:57:17 fffff880`02cc5000 0x49dcd76d fffff880`02de3000 0x0011e000
iaStorV.sys 4/8/2009 11:57:17 fffff880`01016000 0x49dcd76d fffff880`01134000 0x0011e000
[/code]

From before win 7 was out needs updating.

3-If you are overclocking stop, if you are running a raid update its driver.


4-If you are running any anti-virus other than Microsoft Security Essentials remove it and replace with MSE.

http://www.microsoft.com/security_essentials/


After we fix these then we can find what the true causes are.

Ken J
My System SpecsSystem Spec
.

Reply

Thread Tools




Similar help and support threads
Thread Forum
Unknown BSOD from password crack attempt
Okay, I'm pretty sure that I've lobotomized my entire windows at this point. I forgot my password to my account a few days ago, but luckily, I previously installed Kubuntu as an alternate OS, so I still had enough access to attempt a few cracks. (This was after trying to guess my password) First,...
General Discussion
BSOD at almost every attempt to boot PC, error 0x00000124
Hello everyone, I got my PC around 4 years ago and never had any serious issues until now. A few days ago, I returned to my PC after a few hours idle time, and was surprised to be greeted by a BSOD. I hoped that it would turn out to be a one time thing, but as a matter of fact I can't even...
BSOD Help and Support
Windows 7 - BSOD Constant Problem - 2nd attempt
After following all the fixes provided to me for the previous thread I opened, i still get blue screens following ejecting a usb from my usb port. The following information is provided Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 Locale ID: ...
BSOD Help and Support
BSOD Help: Second attempt
I posted here about a month ago with a BSOD problem. I was told to test my memory which I did and no errors were found. The BSOD seemed to go away so I did not pursue it further. Unfortunately, it has returned and the error code inside the BSOD seems to be a bit different than my old one. There...
BSOD Help and Support
BSOD! attempt to write to read-only memory
I am going to post a new theme for this problem, because it doesn't appear in news (In BSoD Help and Support). It considers a old theme. So you can delete this.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 09:41.
Twitter Facebook