Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSoD on startup.

18 Dec 2010   #11
Anaxim

Windows 7 Home Premium 64bit
 
 

Uninstalled it. Could not find the AsIO file where it should be. Guessing that did it.

Will do RealTek and JMicron in a bit.

Thanks for the help and here's to hoping I come here again only to thank you for the resolution.


My System SpecsSystem Spec
.
18 Dec 2010   #12
Anaxim

Windows 7 Home Premium 64bit
 
 

Well, did everything you said and still came up with a BSOD.

Tried twice (noticed that maybe RealTek didn't finish installing right) and attached are both minidumps.
My System SpecsSystem Spec
18 Dec 2010   #13
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

1. Old Drivers

AsIo.sys Mon Dec 17 22:11:49 2007
wacommousefilter.sys Sat Feb 17 07:12:17 2007

I don't know how the software and updating these drivers - you may find them manually. Suppose, the manufacture's site?

Quote:
- Google the driver's name
- Use the manufacture's site. DON'T use the Windows Update or the Update Driver function in Device Manager.
- If you cannot find the driver, post back and someone will try to find it for you.
My System SpecsSystem Spec
.

18 Dec 2010   #14
Anaxim

Windows 7 Home Premium 64bit
 
 

Those are still there? I removed Express Gate and I'm positive I updated the Wacom one.

EDIT: How much damage can it do to simply remove the offending drivers?
My System SpecsSystem Spec
18 Dec 2010   #15
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

I believe that there was a new driver (2010) for the Wacom Mouse Driver.
My System SpecsSystem Spec
18 Dec 2010   #16
Anaxim

Windows 7 Home Premium 64bit
 
 

I downloaded from their website and installed, albeit in safe mode. Swear to god I did.
My System SpecsSystem Spec
18 Dec 2010   #17
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

What's the link of where you got it? (Make sure it's not the direct download link).
My System SpecsSystem Spec
18 Dec 2010   #18
Anaxim

Windows 7 Home Premium 64bit
 
 

Wacom Hardware Drivers

Here set to Graphire4 (CTE) and Windows 7. Top one.


On a side note, I ran my 2 last minidumps (those in the zip a few messages up) through a debug tool. One (33883) returned without any module_name or image_name and the other (31777) returned with ntoskrnl.exe in the image_name.
Is this at all indicative?

EDIT: I gotta head to bed now, tired and need to be up in 8 hours. I'll check back in the morning.
My System SpecsSystem Spec
18 Dec 2010   #19
DeanP

Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
 
 

I'd completely uninstall the driver and the software, associated with it and re-install it.

Try this....

Wacom Hardware Driver Detail
My System SpecsSystem Spec
18 Dec 2010   #20
Anaxim

Windows 7 Home Premium 64bit
 
 

Well. Based on my debug and googling, I tried running, one last time, the last good config. Booted up fine.

Gonna see if this happens tomorrow morning too.

Good luck to me.
My System SpecsSystem Spec
Reply

 BSoD on startup.




Thread Tools




Similar help and support threads
Thread Forum
BSOD during windows startup; can't safe mode; startup repair can't fix
Consistent BSOD during Windows startup for both normal mode and safe mode. BSOD problem started shortly after buggy installations of Microsoft Visual C++ 2005 x64, Microsoft .Net Framework 1.1, and AMD Catalyst Drivers 13.9; and turning off Microsoft .Net Framework 3.5.1. Startup Repair is...
BSOD Help and Support
Brief BSOD on Startup, Startup Recovery Hangs
I have Win 7 Home and in the last couple of days I have been trying to do a backup onto an external drive. The problem comes in when I attempt to start my laptop so that I can begin the backup process, the screen flickers a BSOD, says startup failed and do I want to run Startup Recovery. If I say...
BSOD Help and Support
BSOD on startup, unknown error, startup repair running too long
As the title suggests, my Acer Aspire has been running startup repair for over 20 hours following a BSOD yesterday. I'm not sure if it's worth the wait so maybe you all can shed some light. Yesterday I was stressfully trying to search for something (using Chrome) and the website I was on froze;...
BSOD Help and Support
BSOD on Startup - Startup Reapir not working
On Startup, after POST, I get this BSOD: STOP: c000021a {Fatal System Error} The verification of a knownDLL failed. system process terminated unexpectedly with a status of 0xc000012f (0x00360bf0 0x00000000). The system has shut down. Upon Reboot, I am advised to go to the startup repair....
BSOD Help and Support
BSOD at startup, cant repair startup
i had a bsod 3 days ago with no reason when its at Welcome screen and my startup items are not loaded at all(all drivers programs etc.). i tried to reboot and my pc gone wild. it cant even see welcome screen cuz of bsods. also i am having black screens when booting up. sometimes its just freezes...
BSOD Help and Support
BSOD on startup , error 0x000000f4 . startup takes half an hour
so everything was fine when my laptop started to become very slow and i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer ,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:31.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App