Endless cycle of BSOD


  1. Posts : 15
    Windows 7 Ultimate N x64
       #1

    Endless cycle of BSOD


    My computer, running Windows 7 Ultimate N x64, randomly rebooted whilst I was unzipping a file. I am now stuck in an endless loop of BSODs. I get two different blue screens:

    DRIVER_IRQL_NOT_LESS_OR_EQUAL, accompanied with a stop message that refers to storport.sys

    and

    IRQL_NOT_LESS_OR_EQUAL, accompanied with a stop message 0x0000000a

    This happens without fail on every boot up. Sometimes it will load into windows and I can see my desktop for a few seconds before the BSOD - but most times it doesn't even get to the desktop. I've tried booting up by pressing F8 and using all of the listed boot options (about 10 options?) - but the same thing happens every time.

    The only thing I can boot into is the recovery console. However start up repair either finds a problem but tells me that it cannot fix it, or it doesn't find a problem at all. All of the restore points fail to work (reporting an "unspecified error" whilst restoring). I ran the memory test for about an hour with no reported errors.

    I'm now at my wits end and I'm hoping someone may be able to help me diagnose the problem - bearing in mind I only have access to the recovery console!

    I've just realised I can use a USB stick in recovery console so I have managed to get a minidump file off of the computer. However the forum file uploader won't let me upload it (says invalid file)....
      My Computer


  2. JMH
    Posts : 7,952
    Win 7 Ultimate 64-bit. SP1.
       #2

    uglistix said:
    My computer, running Windows 7 Ultimate N x64, randomly rebooted whilst I was unzipping a file. I am now stuck in an endless loop of BSODs. I get two different blue screens:

    DRIVER_IRQL_NOT_LESS_OR_EQUAL, accompanied with a stop message that refers to storport.sys

    and

    IRQL_NOT_LESS_OR_EQUAL, accompanied with a stop message 0x0000000a

    This happens without fail on every boot up. Sometimes it will load into windows and I can see my desktop for a few seconds before the BSOD - but most times it doesn't even get to the desktop. I've tried booting up by pressing F8 and using all of the listed boot options (about 10 options?) - but the same thing happens every time.

    The only thing I can boot into is the recovery console. However start up repair either finds a problem but tells me that it cannot fix it, or it doesn't find a problem at all. All of the restore points fail to work (reporting an "unspecified error" whilst restoring). I ran the memory test for about an hour with no reported errors.

    I'm now at my wits end and I'm hoping someone may be able to help me diagnose the problem - bearing in mind I only have access to the recovery console!
    Welcome Uglistix

    If you have your win 7 dvd you do have the option of booting from the win 7 dvd and doing a repair install.

    Let us know if you need assistance with that proceedure

    Jan
      My Computer


  3. Posts : 15
    Windows 7 Ultimate N x64
    Thread Starter
       #3

    Thanks - I have the Win 7 DVD. I've booted from this and now I have the standard installation screen with three options:

    Install Now
    What to know before installing Windows
    Repair you Computer

    For a repair install do I go to "Install Now" and then select "Upgrade"?

    Actually - selecting "Upgrade" doesn't work. It tells me that the computer has started using the installation disk and that an upgrade must be started after Windows has started normally.

    I've added the latest minidump file as a zip.
      My Computer


  4. Posts : 28,845
    Win 8 Release candidate 8400
       #4

    uglistix said:
    Thanks - I have the Win 7 DVD. I've booted from this and now I have the standard installation screen with three options:

    Install Now
    What to know before installing Windows
    Repair you Computer

    For a repair install do I go to "Install Now" and then select "Upgrade"?

    Actually - selecting "Upgrade" doesn't work. It tells me that the computer has started using the installation disk and that an upgrade must be started after Windows has started normally.

    I've added the latest minidump file as a zip.

    You have two glaring problems. I am not sure if you can log on in any shape or fashion

    1-asacpi.sys a huge problem

    ASACPI.sys Sun Mar 27 22:30:36 2005
    The 2005 version of this driver is a known BSOD cause.
    Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
    Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 8th item down).
    Download and install it.
    Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).
    2-Old drivers needing update.

    Code:
    
    
    Code:
    nvm62x64.sys    10/17/2008 16:01:06    fffff880`05075000    0x48f8fd12    fffff880`050d8d80            0x00063d80                    
    spldr.sys    5/11/2009 11:56:27    fffff880`0149b000    0x4a0858bb    fffff880`014a3000            0x00008000                    
    GEARAspiWDM.sys    5/18/2009 07:17:04    fffff880`043cd000    0x4a1151c0    fffff880`043da000            0x0000d000                    
    amdxata.sys    5/19/2009 12:56:59    fffff880`01136000    0x4a12f2eb    fffff880`01141000            0x0000b000                    
    dump_nvstor.sys    5/20/2009 01:45:37    fffff880`057bb000    0x4a13a711    fffff880`057e6000            0x0002b000                    
    nvstor.sys    5/20/2009 01:45:37    fffff880`00c2a000    0x4a13a711    fffff880`00c55000            0x0002b000
    How To Find Drivers:
    - search Google for the name of the driver
    - compare the Google results with what's installed on your system to figure out which device/program it belongs to
    - visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
    - if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.
    - - The most common drivers are listed on this page: Driver Reference Driver Reference
    - - Driver manufacturer links are on this page: Drivers and Downloads

    Let us know if you need help with this


    ken J

    edit: try disconnecting everything that is not critical. Especially USB, bluetooth,etc. Also if you can pull all the ram but one stick.

      My Computer


  5. Posts : 15
    Windows 7 Ultimate N x64
    Thread Starter
       #5

    Thanks - do you know how I can install drivers from the recovery console? This is the only access I currently have! Alternatively is there a way to disable these drivers using regedit? Perhaps then i will be able to boot into windows so that i can update them?

    Note that I am able to access regedit by running it from the cmd console within the recovery console...
      My Computer


  6. Posts : 28,845
    Win 8 Release candidate 8400
       #6

    uglistix said:
    Thanks - do you know how I can install drivers from the recovery console? This is the only access I currently have! Alternatively is there a way to disable these drivers using regedit? Perhaps then i will be able to boot into windows so that i can update them?

    Note that I am able to access regedit by running it from the cmd console within the recovery console...
    There is a workaround.

    While booting from the OS dvd hit shift F-10 to get you into the cmd window. Swap the OS dvd for a dvd with the driver on it and copy E:\........ to the appropriate c:\windows\...... ugly at best but I think it will work.


    Ken J
      My Computer


  7. Posts : 15
    Windows 7 Ultimate N x64
    Thread Starter
       #7

    I'm beginning to think this is a hardware problem. I have a Windows Home Server that takes full daily backups of my PC. So I wiped my hard drive and used the WHS back up from a week ago and also one month ago (i.e. trying two different points when everything was working fine) - and I still get BSOD during boot up.

    So I started the usual process of removing memory sticks, swapping them around, etc. Still no luck. I've also removed any unnecessary hardware (DVD drive, case-mounted USB/Firewire/Sound ports, WiFi card, spare HDD) so that I'm now left with PSU, m/board, CPU, RAM, graphics, HDD. Still no luck.

    Short of buying replacement hardware and swapping it in/out one at a time, is there any way to identify sources of hardware problems?

    Thanks
      My Computer


  8. Posts : 15
    Windows 7 Ultimate N x64
    Thread Starter
       #8

    This has been resolved now - thanks for everyone's help. I installed a fresh copy of windows on a second hard drive and Microsoft Security Essentials detected a Trojan in the MBR of my original hard drive. I cleared it up with TDSSKiller and now my original installation is back up and running.
      My Computer


  9. JMH
    Posts : 7,952
    Win 7 Ultimate 64-bit. SP1.
       #9

    uglistix said:
    This has been resolved now - thanks for everyone's help. I installed a fresh copy of windows on a second hard drive and Microsoft Security Essentials detected a Trojan in the MBR of my original hard drive. I cleared it up with TDSSKiller and now my original installation is back up and running.

    That is indeed good news.
    Thanks for letting us know.
    Should you have any problems in the future you know where to come for help.
    Safe surfing
    .
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:19.
Find Us