Windows will not logoff or in praticular,,, restart

Page 1 of 2 12 LastLast

  1. Posts : 597
    windows 7 Professional
       #1

    Windows will not logoff or in praticular,,, restart


    about 5 months ago a baught a new HP Elite 300z AMD PC, i droped close to 3000 after all monitors and pc customization from hp, recently i have run into some issues, explorer.exe crashes CANSTANTLY, most programs onced opend and then closed will not open again, trend micro will not start up, my internet is slower than usual, i cant download or un install programs, and worst of all i cant shut down or re start, i get stuck on the shuting down page or the loging off display screen, i have done several factory resets with recover discs i have orderd from hp, i have tried startup repair, sys repair and manualy checked over my regestry and found nothing obviously wrong, i have the feeling somthing i do not know about is running in the background but do not know what, when i went to a geek squad some one told me i would need a suplemental disk which hp is refusing to send me saying " oooah i am thinking it would be dis three, are you having the disk?" and they have hung up on me multiple times.
    if someone could shed some light on the situation, adleast this would make a little more sence and would be better if someone has a solution.


    ( forgot to mention,,, all drivers are up to date )
      My Computer


  2. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #2

    Mmmm....

    Lets start here:

    If you can boot the syetm succesfully, can you please open an elevated Command Prompt, and type in the following command:

    sfc /scannow

    It may take some time, so let it run through. Copy and paste the resultant message (or image) here so we can see the results.

    Regards,
    Golden
      My Computer


  3. Posts : 597
    windows 7 Professional
    Thread Starter
       #3

    Golden said:
    Mmmm....

    Lets start here:

    If you can boot the syetm succesfully, can you please open an elevated Command Prompt, and type in the following command:

    sfc /scannow

    It may take some time, so let it run through. Copy and paste the resultant message (or image) here so we can see the results.

    Regards,
    Golden




    after restarting several times my computer has finaly stoped locking up, i ran the cmd you mentiond and here are the results, see what you can make of it but it seems prety streight forword to me


    C:\Windows\system32>sfc /scannow
    Beginning system scan. This process will take some time.
    Beginning verification phase of system scan.
    Verification 100% complete.
    Windows Resource Protection did not find any integrity violations.
    C:\Windows\system32>
      My Computer


  4. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #4

    Good.

    Now can you open the elevated command prompt again and type

    chkdsk /f

    Copy and paste the results here.

    Regards,
    Golden
      My Computer


  5. Posts : 597
    windows 7 Professional
    Thread Starter
       #5

    Golden said:
    Good.

    Now can you open the elevated command prompt again and type

    chkdsk /f

    Copy and paste the results here.

    Regards,
    Golden
    C:\Windows\system32>chkdsk /f
    The type of the file system is NTFS.
    Cannot lock current drive.
    Chkdsk cannot run because the volume is in use by another
    process. Would you like to schedule this volume to be
    checked the next time the system restarts? (Y/N) n


    i had earlyer sayed yes and when it re started a s creen came up and it whent by somewhat quickly, by the time i noticed it finished, my computer was restarting, and haveing trouble restarting at that
      My Computer


  6. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #6

    Ok. You were correct to say "YES", but it should have taken longer to run after the first reboot.

    What are the symptoms of the non-restart now? At what point is it getting too, and are there any messages shown?
      My Computer


  7. Posts : 597
    windows 7 Professional
    Thread Starter
       #7

    Golden said:
    Ok. You were correct to say "YES", but it should have taken longer to run after the first reboot.

    What are the symptoms of the non-restart now? At what point is it getting too, and are there any messages shown?
    when it started it had ran for about 5-10 min, when it was done it just ATEMPTED to restart, after 15 min i force shut down and started manualy and when i started up it installed updates up to 30 pct, and then ATEMPTED to restart again, once again around 20 min i restarted and then when i got in it apeared to have cleaned up my desktop a bit but didnot solve any problems, + latly my middle monitor of 3 isnt starting on time, it takes about 2 seconds longer to turn on every time i shut down, restart, or turn somthing on to full screen, its always 2 seconds behind, i think its most likly related.
      My Computer


  8. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #8

    I don't understand : you say it re-started, but then then you had to force a shutdown? Why would you need to force a shut-it down if its re-started?

    What updates is it doing? Windows updates? Some updates require a re-start, so you shouldn't intefere with that process? If its re-strating by itself after updates, then let it do so.

    Is the PC making any beeping noises just prior to rebooting itself?
      My Computer


  9. Posts : 597
    windows 7 Professional
    Thread Starter
       #9

    Golden said:
    I don't understand : you say it re-started, but then then you had to force a shutdown? Why would you need to force a shut-it down if its re-started?

    What updates is it doing? Windows updates? Some updates require a re-start, so you shouldn't intefere with that process? If its re-strating by itself after updates, then let it do so.

    Is the PC making any beeping noises just prior to rebooting itself?
    Every time I install something it says installing updates, same if I un install, when the chkdsk /f finished it ATTEMPTED to restart my computer after installing updates, i eventualy after about 15-20 min felt I should do it manual, when I got into my computer after manual restarting most of the programs on my pc. Had lost a lot of the saved settings, which is ok because I've just done a system restoring a few days ago. And I don't here any beeping noises on a day to day basis when it tries to restart or I manual do it, I think I might've heard it once or twice.
      My Computer


  10. Posts : 2,566
    Win 7 Pro x64 SP1 OS X Snow Leopard 10.6.7
       #10

    I'd actually check for malware and viruses on your computer. Uninstall Trend-Micro on your system and replace it with MS Security Essentials. Gurus and Experts recommend MS Security Essentials. It is free, easy to use and less-annoying.

    Also, install Malwarebytes and post back with the results. Do this in Safe Mode. Please do few full scans.

    Btw, why would you bring the computer to the Geek Squad? The first thing they would do is reinstall Windows. If you bring it to us (seven forums), the first thing we would do is tell you what to do.
    Last edited by DeanP; 04 Jan 2011 at 07:36. Reason: add more info
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 10:58.
Find Us