KMODE_EXCEPTION_NOT_HANDLED (1e)

Hello everyone,

I am getting this BSOD on a new install/build and need help solving.

Everything installs fine and the PC will run for perfectly for a couple of days then I get this BSOD KMODE_EXCEPTION_NOT_HANDLED (1e).

Sometimes the system will boot right back up and work for a few minutes then the screen image will start to "pixelate" and degarde and the system will shut down without a BSOD.

Other times I can not get the PC to boot again and will have to cut the power and wait a few hours. Then it will boot again and be fine. I am working on it right now and everthing is fine after letting it sit overnight.

I have attached the System Health Report and BSOD Report as zip files.

I have tried to follow all the rules so if I haven't I apologize upfront.

System specs:

Windows 7 64bit Professional(retail install)
AMD Phenom Quad 9850
Cosair XMS 2x4096-6400C5 8gb
WD Caviar Blue 250GB
Asus M4A78-E
ATI Radeon 4650
2 X IHAS 422 DVD
Cosair TX 750 PSU

Sorry,

Here are the attachments

Thanks,

Jim

ibjer said:

Sorry,

Here are the attachments

Thanks,

Jim

First problem asacpi.sys. A huge cause of BSOD.

ASACPI.sys Sun Mar 27 22:30:36 2005

The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 8th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).

Thank You ZigZag3143,

I have updated this driver and hopefully this will cure my issue.

Unfortanetly I just had another BSOD event.

Here are the attachments

Thank You so much for your assistance

Unfortanetly I have not solved my issue. I am going to scrap this build and go in another directions.

I will be in touch if I have issues on the next build.