Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: BSODs after Start-Up

07 Jan 2011   #1

Windows 7 Home Premium 32bit
BSODs after Start-Up

My system is totally new with WIN7 Home Premium 32bit ordered from Microsoft. Either at the Welcome Screen or just after my profile appears, a BSOD appears and the OS goes into repair mode. This can take thirty to sixty minutes, with every type of repair being initiated by Windows. Eventually, after multiple shut-downs and starts, the computer starts and operates normally. The problem returns after shut down, or when attempting a Restart. Coming out of Sleep Mode (S3), the screen appears momentarily and then goes blank, while the hard drive stops functioning. A hard shut-down is needed, resulting in the above mentioned start-up problem.

Gigabyte GA-880GA-UD3H (rev 2.0) F4
AMD Athlon II X3 415e 2.5 GHz 45W
G.Skill F3-10666CL9D-4GBECO 1.35V DDR3-1333 PC3-1066
SilverStone SST-ST50F-ES 500W
Seagate ST3500641AS-RK 500 GB 16MB 7200RPM
USB Mouse and KB
Antec SuperLanBoy case

My System SpecsSystem Spec
07 Jan 2011   #2

Systems 1 and 2: Windows 7 Enterprise x64, Win 8 Developer

Update Realtec drivers:

Rt86win7.sys Thu Feb 26 04:04:22 2009
My System SpecsSystem Spec
08 Jan 2011   #3

Windows 7 Home Premium 32bit

The RealTek driver was never installed. I am using an AP card. However, I downloaded and installed drivers for the LAN, Audio, and Video from the Gigabyte Web Site. It seems to be working for now. I am withholding judgment as to it being repaired. I will keep you appraised of the situation.
My System SpecsSystem Spec

09 Jan 2011   #4

Windows 7 Home Premium 32bit

I allowed the computer to enter Sleep Mode. This afternoon, I awoke the computer. Everything came on, my profile screen came up, and then went blank. The HDD stopped working and the computer refused to restart. I had to force a shutdown, which resulted in a Code 41 setting. Something is desperately wrong when a computer will not come out of sleep or restart properly!!!

Where do we go from here???
My System SpecsSystem Spec

 BSODs after Start-Up

Thread Tools

Similar help and support threads
Thread Forum
Several BSODs usually at start-up.
Recently, I have had several BSODs and I cannot fathom what the actual cause is and I have seen memory management errors, IRQL errors and cpu clock errors. Firstly, I recently purchased a new case for the computer, after installing all the components I then hit the dreaded blue screen, used...
BSOD Help and Support
Random BSODs during start up
Laptop(acer aspire 7750g) sometimes BSODs at start up, other times it starts up normally. May be caused by my new drivers, but not sure. Im a bit scared to turn off my computer everytime because of these errors.
BSOD Help and Support
BSODs start to appear since a month ago
Start to get BSOD since 7/4. Please see the attached. Thanks for any helps.
BSOD Help and Support
BSODs just after windows start up
I've recently put together my first new full build, and I need some help troubleshooting. I have been getting some bad_pool_header BSODs the first few times I start it up, and occasionally some artifacting when not running games (I thought I had this solved with a fix in CCC, but it came back). As...
BSOD Help and Support
I ve had some bsods lately during start up using win 7 x64 .I m uploadind the zip created with SF Diagnostic tool ,hoping for your help. thanks everyone. ps: pls excuse my bad english
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:59.
Twitter Facebook Google+